|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : .4.1 |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) .4.1.3 |
| 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). .4.1.10 |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). .5.3 |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for : .5.9 |
| 6 | Suspended floors, roofs, landings, balconies and access platform .5.9.3 |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. .5.22 |
| 8 | Thermo-Mechanically Treated bars of grade Fe-500D or more .5.22.6 |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: .6.1 |
| 10 | Cement mortar 1:4 (1 cement : 4 coarse sand) .6.1.1 |
| 11 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade , colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. .8.2 |
| 12 | Granite stone slab of colour black, Cherry/Ruby red .8.2.2 |
| 13 | Area of slab over 0.50 sqm .8.2.2.2 |
| 14 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. .11.41A |
| 15 | Glazed Vitrified tiles Matt/Antiskid finish of size .11.41A.3 |
| 16 | Size of Tile 600 x 600 mm .11.41A.3.1 |
| 17 | 12 mm cement plaster of mix : .13.1 |
| 18 | 1:4 (1 cement: 4 fine sand) .13.1.1 |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. .13.8 |
| 20 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .13.81 |
| 21 | Old work (one or more coats) .13.81.1 |
| 22 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. .13.91 |
| 23 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. .15.2 |
| 24 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) .15.2.1 |
| 25 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) .15.2.2 |
| 26 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. .15.7 |
| 27 | In cement mortar .15.7.4 |
| 28 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. .15.23 |
| 29 | For thickness of tiles 10 mm to 25 mm .15.23.1 |
| 30 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. .15.56 |
| 31 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. .15.6 |
| 32 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. .17.16A |
| 33 | Providing and fixing looking mirror of 5mm thick with beeding including cutting of required size / shape complete in all respecst. .17.31 |
| 34 | Providing and fixing soil, waste and vent pipes : .17.35 |
| 35 | 100 mm dia .17.35.1 |
| 36 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 .17.35.1.2 |
| 37 | Providing and fixing plain bend of required degree .17.39 |
| 38 | 100 mm dia .17.39.1 |
| 39 | Sand cast iron S&S as per IS - 3989 .17.39.1.2 |
| 40 | Providing and fixing collar : .17.57 |
| 41 | 100 mm .17.57.1 |
| 42 | Sand cast iron S&S as per IS - 3989 .17.57.1.2 |
| 43 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : .17.60 |
| 44 | 100 mm inlet and 100 mm outlet .17.60.1 |
| 45 | Sand cast iron S&S as per IS: 3989 .17.60.1.1 |
| 46 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall. .18.1 |
| 47 | 15 mm dia nominal bore .18.10.1 |
| 48 | 20 mm dia nominal bore .18.10.2 |
| 49 | 32 mm dia nominal bore .18.10.4 |
| 50 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): .18.17 |
| 51 | 20 mm nominal bore .18.17.1A |
| 52 | Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21 |
| 53 | 45 cm length .18.21.2 |
| 54 | 15 mm nominal bore .18.21.2.1 |
| 55 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : .18.38 |
| 56 | 15 mm diameter pipe .18.38.1 |
| 57 | 20 mm diameter pipe. .18.38.2 |
| 58 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): .18.46 |
| 59 | 20 mm nominal bore .18.46.2 |
| 60 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. .18.53A |
| 61 | Cutting holes up to 30x30 cm in walls including making good the same: .18.76 |
| 62 | With common burnt clay F.P.S. (non modular) bricks .18.76.1 |
| 63 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. .18.78 |
| 64 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. .22.5 |
| 65 | Providing and fixing 1st quality / ceramic / vitrified glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make of size 600 x 1200 (Colour & design as approved bt Engineer-in-charge) in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. .NSR |
| 66 | Providing and fixing of Drip Seal complete in all respect .NSR |
| 67 | 100 mm . |
| 68 | Dismantling of wall tiles from all height iincluding mortar /plaster complete in all respect .NSR |
| 69 | Providing and fixing white vitreous china Rimless Back To Wall WC with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set, Size: 370x580x430 mm, complete of make: Jaquar model: OPS-WHT-15955P180UFSM Opal or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 70 | Providing and fixing Single Piece Slim Concealed Cistern Body with Installations Kit & “S-Type” drain pipe connection set for Wall Hung WC (with Flush Control Plate) complete of make Jaquar model no. JCS-WHT-2400S or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 71 | Providing and fixing of wash Basin Thin Rim Table Top Basin, Shape - Round, Size: 480X480X135mm make Jaquar model no. FLR-WHT-5931 or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 72 | Providing and fixing of Bottle Trap 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange make Jaquar model no. ALD-769L250x190 or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 73 | Providing and fixing of Single Lever Basin Mixer with Popup waste with 450mm Long Braided Hoses make Jaquar model no. OPP-15011BPM or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 74 | Providing and fixing of Angular Stop Cock with Wall Flange make Jaquar model no. OPP-15053PM or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 75 | Providing and fixing of 2 Way Bib Cock with Wall Flange make Jaquar model no. OPP-15041PM or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 76 | Providing and fixing of Tumbler Holder make Jaquar model no. AKP-35741P or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 77 | Providing and fixing of Soap Dispenser with Glass bottle make Jaquar model no.AKP-35735P or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 78 | Providing and fixing of Single Towel Rail 600mm Long make Jaquar model no.AQN-7711 or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 79 | Providing and fixing of Glass Shelf 600mm Long make Jaquar model no.AKP-35771P or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 80 | Providing and fixing of Towel Ring Square make Jaquar model no.AKP-35721P or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 81 | Providing and fixing of Toilet Roll Holder with Stainless Steel Flap make Jaquar model no.ACN-1153S or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 82 | Providing and fixing of Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook make Jaquar model no.ALD-565 or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 83 | Providing and fixing of Hand dryer make JAL/Viking complete in all respect to the entire satisfaction of EIC .NSR |
| 84 | Supplying & fixing vertical/horizontal wall mounted water heating with capacity 10 litre single phase complete in all respect of approved make/model Jaquar ELM-WHT-3KWV010 or equivalent model of CERA / Hindware to the entire satisfaction of EIC .NSR |
| 85 | Providing and fixing of Single Lever 3-inlet Divertor Exposed parts kit Consisting of Operating Lever, Wall Flange & Button Only make Jaquar model no.OPP-15193NKPM or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 86 | Providing and fixing CP Brass Bath Spout with wall flange make Jaquar model no.SPJ-CHR-35463PM or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 87 | Providing and fixing of Overhead Shower 120mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete make Jaquar model no.OHS-1789 or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 88 | Dismantling of G.I./C.I. Pipes and taking out the pipes, manully by mechanical means including stacking of pipes with in 50 metres lead as per direction of Engineer-in-Chandigarh. .NSR |
| 89 | Providing and fixing of C.P. steel grating hole/ without heavy duty 100mm dia complete in all respect. NSR .NSR |
| 90 | Providing and fixing of G.I. Elbow (1-1/2\\"3\\") C.P. steel grating hole/ without heavy duty 100mm dia complete in all respect. NSR .NSR |
| 91 | Providing & Fixing Hand Shower 100 mm Round Shape Multi Flow (ABS Body Chrome Plate with Gray Face Plate) without Rubit Cleaning System and 1.5 m long flex tube in Chrome finish (HSH-1939) & wall bracket (SHA-555) complete in all respect. NSR .NSR |
| 92 | Providing & Fixing Hand Shower arm/rod 20 mm dia & 300 mm long round shape with 90 degree bend wall mounted showers with stainless steel flange (SHA-479L300S) complete in all respect. NSR .NSR |
| 93 | Providing & Fixing internal part of Single Concealed Stop Cock Consisting of Operation Lever, Cartridge Sleeve, wall Flange (with Seals) OPP-15083KPM & Concealed body of flush cock suitable for 25mm pipe line ALD-081 make Jaguar model .NSR |
| 94 | Providing & fixing internal body of Single Lever 3-inlet Diverter Exposed parts kit Consisting of Operation lever, wall flange & Button Only (Suitable for item ALD-193) make Jaguar .NSR Please Enable Macros to View BoQ information |
