Tender For Repari And Paint Work Of Toe Wall, M.S.Flat Railing And Gate In Variou Parks Of Sector 35,Chandigarh Udner Revenue Head., Chandigarh-Chandigarh
TDR : 55796358
Tender Notice
BOQ
5 Days Left
Chandigarh
Chandigarh
Tender For Repari And Paint Work Of Toe Wall, M.S.Flat Railing And Gate In Variou Parks Of Sector 35,Chandigarh Udner Revenue Head.
Name of Work:- Repari and Paint work of toe wall, M.S.flat Railing and Gate in variou Parks of Sector 35,Chandigarh udner Revenue Head.
Sl. No.
Item Description
1
Providing and applying JK putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (DSR 13.26)
2
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm) on existing cement paint:(DSR:13.111.2)
3
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. (DSR 14.54.1)
4
Providing and fixing M.S. flat railing having flat size 50x12mm,(2\\"x1/2\\") 4'-0\\" high(3' high above ground level) welded with 2no's M.S. flat 38x10mm horizontally at distancwe 9.5\\" upper and 9.5” from bottom and 1no's M.S. flat 25x10mm on the lower side of top M.S. flat including 8mm M.S. square bars of 45 degree angle at 6\\" center to center between the 2no's horizontally M.S. flat iron. The rates also includes the cost of 2 No. 12mm dia nut and bolts with 2no's M.S. pipe of 19mm dia and 3\\" long imbeded in ceme sleeve piece embedded in cement concrete 1:2:4 block of size 1'-0\\"x0'-9\\"x1'-0\\" and painted with three coats of approved quality paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-Charge.
5
Providing and fixing M.S flat gate having flat size 50 x12 mm having 5'-0\\" long and 2'3\\" high of each openable shutter welded with 2 no's M.S flat 40 x10mm including 25X10mm horizontal below top flat horizontally at 6'' upper and 6'' from bottom and 9 no's M.S square bars of 45 degree angle at 6'' center to center including 2 no's M.S. Channel 75x40mm in posts having 2no's channel welded to form post of size 75x80mm & 5'-0\\" long(3'-0\\" above ground level and 2'-0\\" below ground level) with lugs 1'-3\\" long 2 no's M.S. Flat 40x10mm at bottom under each post to be provided on both sides of shutter with 2 no's hinges for openable arrangements with sliding bolt for locking arrangements and gate shall be properly embedded in cement concrete 1:2:4 (1'-6\\"x1'6\\"x2'-0\\") be painted with two coats of approved quality paint over one coat of primer complete in all respect to the entire satisfication of Engineer- in-Charge.
6
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (DSR 15.7.4)
7
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR : 6.1.1)
8
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. as required. (DSR 10.25.2)
9
15mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) to the entire satisfaction of Engineer-in-Charge. (DSR 13.5.1)
10
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) Flush/ Ruled/ Struck or weathered pointing to the entire satisfaction of Engineer-in-Charge. (DSR 13.31.1)c
11
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (DSR 14.17)
12
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR 15.56) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
