|
| 1 | Grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site |
| 2 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for (unreinforced) in of any thickness |
| 3 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m |
| 4 | M&L for surface excavation of hard/dense soil not exc 30cm deep and averaging 15cm deep and getting out |
| 5 | Earth work excavation in hard/ dense soil for foundation width and depth not exceeding 1.50m and getting out. |
| 6 | Earth work excavation in hard/ dense soil for foundation width and depth exceeding 1.50m and not exceeding 3.0m getting out. |
| 7 | Material and labour for sand filling in foundation including watering and consolidation. |
| 8 | M & L for P.C.C 1:3:6, C-2 type using 40mm graded aggregated in foundation, grouting of steel structures. |
| 9 | M & L Cement concrete in foundations, filling and mass concrete type B2 1:2:4 using 20mm grade aggregate. |
| 10 | Material and labour for Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 11 | M & L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface |
| 12 | M & L for providing RCC M20 Concrete (1:1.5:3) in Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete |
| 13 | M & L for providing RCC M20 Concrete (1:1.5:3) in Columns, pillars, piers, posts and struts |
| 14 | M & L for providing RCC M20 Concrete (1:1.5:3) in Beams, cantilever bressummers, lintels over 1.5m span |
| 15 | M & L for providing RCC M20 Concrete (1:1.5:3) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 16 | M & L for Formwork(FLAT)to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter Add fair finished surfaces. |
| 17 | M & L for Formwork (square, rectangular) to sides of pillars, posts, struts, piers, columns and stanchions Add fair finished surfaces. |
| 18 | M & L for Formwork(flat) to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.add fair finished surfaces |
| 19 | M & L for Formwork (flat) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)add fair finished surfaces |
| 20 | M & L for Damp proof course in CM 1:2:4 type B-0 in 40 mm thick to horizontal or vertical surfaces including necessary formwork |
| 21 | M & L For precast cement concrete set in cement mortor 1:6 type B1 (1:2:4) 20mm graded aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces. |
| 22 | S & F of Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, Bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 23 | S & F of Mild steel TMT bars 8 mm to 6 mm dia , cut to length, bent to shape required, including cranking, Bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 24 | M & L for Brickwork built in CM 1:6 using subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius. |
| 25 | M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 |
| 26 | Material & labour for cement plastering with CM(1:4) 15 mm thick wall plastering. |
| 27 | M & L Forming jambs Cement mortar 1:4,Making good under cills or over arches, lintels and bressummers.including all pinning when necessary |
| 28 | Material & labour for plastering with CM(1:4) 12mm thick celling plastering. |
| 29 | Material and labour for applying two coats of Exterior emulsion new External wall surfaces with priming the surface. all complete (MAKE:- ASIAN paint (Apex Ultima),NEROLAC(Excel Total) & BERGER(Weather coat long life 7) or suitably equivalent make. |
| 30 | Material and labour for applying two coat of oil bound distemper on internal wall surfaces (MAKE:- ASIAN, NEROLAC, BERGER) or suitably equivalent make |
| 31 | M&L for White washing on white washing on celling with two coats New celling surfaces. |
| 32 | S & F Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, Joint free non skid tiles and screed bed layer in cement mortor 1:4 15 mm thick layer floor finished. |
| 33 | M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles exceeding 0.36 sqm not exceeding 0.42 sqm , in floors/wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bedding 1:4, 25mm thick for laying floor finishes with for joint free |
| 34 | Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area ofwindow upto 0.75 sqm.) comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shallbe accepted but no extra payment on this account shall be made. |
| 35 | S & F of 5.5mm Sheet glass, ordinary quality and glazing rubber beading with in square exceeding 0.5 sq. m in each pane as required and Extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side. |
| 36 | Supply and fixing of 45x70 mm Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory Windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per Direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 37 | S & F of 30mm thick main door design engraved factory made extruded WPC (Wood Polymer Composite) solid plain flush door shutter or required size comprising of origin polymer of k value 58-60 (suspension grade), calcium corbonate and natural fiber (wood powder)/rice husk/wheat husk and non toxic additives (maximum toxic index of 12 for 100grms ) having minimum density of 650kg/cum,screw withdrawel 1800N(face) & 900N(edge) minimum compressive strength of 50N/mm2, modulus strength of 50N/mm2,modulus of elasticity 850N/mm2and property of being termite/borer proof,water/moisture proof of required size with neccessary full body threaded star head counter sunk SS screws, All as per direction of engineer site incharge. |
| 38 | S & F of 30mm thick factory made extruded WPC (Wood Polymer Composite) solid plain flush door shutter or required size comprising of origin polymer of k value 58-60 (suspension grade), calcium corbonate and natural fiber (wood powder)/rice husk/wheat husk and non toxic additives (maximum toxic index of 12 for 100grms ) having minimum density of 650kg/cum,screw withdrawel 1800N(face) & 900N(edge) minimum compressive strength of 50N/mm2, modulus strength of 50N/mm2,modulus of elasticity 850N/mm2and property of being termite/borer proof,water/moisture proof of required size with neccessary full body threaded star head counter sunk SS screws, All as per direction of engineer site incharge. |
| 39 | Cutting chases, pinning in. making good to facings for Brick walls Where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, Shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 40 | S&F Of Aluminium anodised, barrel tower bolts (150mm) of extruded section and fixed. |
| 41 | S&F of butt hinges (125mm)cast,brasswith mild steel hinge pin,bright polishedand fixing but type B-12. |
| 42 | S&F of Aluminium handles(150mm), cast Type , anodised. |
| 43 | S & F Aluminium alloy 250mm lenght, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 44 | M&L for PVC(SWR) gully trap 125/110 mm, setting and jointing with solvent. |
| 45 | S & F of PVC (SWR) 75mm outlet dia floor trap, plain with grating including jointing with solvent cement. |
| 46 | S&F 600mm wide wash basin of polished 18mm thick granite slab top, providing 200mm high front facia & band above the counter top of same shade granite. All exposed surfaces of platform to be finished in same granite slab and cut-out, exposed edges to be bull nosed with mirror polished. Also include making necessary cut-outs thru counter top. Cost to also include drainage (32mm waste fittings) pipes and raised platform, 15mm piller taps, cast copper alloy, and 15mm connection pipe all completed and finished to satisfactory conditions etc. |
| 47 | S & F of IWC Squat pan (Orisa pattern) Size 580 x 440mm white / colour with integral foot rests providing lime concrete bed and finishing the top and PVC valveless 10 litre, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets etc., |
| 48 | Supply and fixing of EWC with \\"P\\" or \\"S\\" trap including bedding valveless syphonic action type 10 litres flushing cistern low level white with inlet ball valve float and handle including bracket Plastic water closet seat, black, closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device and etc., |
| 49 | S&F of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified & Health faucet fixing in pipe etc complete. |
| 50 | S & F of 15mm cast copper alloy, screwed down, high pressure stop cock/Angle cock fancy type chromium plated with long shank and cup (concealed type) |
| 51 | S& F of 15mm fancy type bib tap bore dia of 15mm (105grm) pipe standard of PTMT any colour High pressure screwed foriron pipe and fixed in repairs. |
| 52 | S & F of Looking Mirror of any size as required at site selected quality glass, mount on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass. |
| 53 | Supply and fixing of Towel Rail 450mm long of PTMT fixed withand including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) |
| 54 | S&F Of Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed 1000 litres. |
| 55 | S&F of 20mm ball valves set ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 2 0 m m - 2 1 0 g m s.) |
| 56 | S&F of Gun-metal (32mm),globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 57 | Supplying and laying of CPVC pipes 32mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/celling or laying in floors, in trenches complete all as specified. |
| 58 | Supplying and laying of CPVC pipes 20mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/celling or laying in floors, in trenches complete all as specified. |
| 59 | S& F of PVC 75mm dia pipes single sockets, in any length with rubber ring joints laid in trenches or in floor. |
| 60 | S& F of PVC 110mm dia pipes single sockets, in any length with rubber ring joints fixed to floor. |
| 61 | S&F of PVC bend with door 75mm dia any radius. |
| 62 | S&F of PVC bend with door 110mm dia any radius. |
| 63 | Supply and fixing PVC (SWR) vent cowl 75 mm dia. |
| 64 | PVC (SWR) 75mm junction single, (Single T) equal or UnequaL |
| 65 | Removing excavated (rocks) material exceeding 1.50 km but not exceeding 5 km and depositing where directed. |
| 66 | Returning refilling in layers not exceeding 25 cm thick in layers in hard / dense soil including, spreading & leveling |
| 67 | Removal of excavated soil debris materials to a lead exceeding 250 m but not exceeding 500 m and depositing where directed including, spreading & leveling |
| 68 | Supply and fixing of seamless Polyurethane (PU) based elastomeric coating exposable to atmosphere. The work consisting a) Supply & Application of PU based primer minimum of 100 grms per SQM b) Supply and Application of seamless PU based elestometic coating over a primer coat to acheive a thickness of 1.50mm DFT in two coats, with an application rate of minimum 2.1kg/sq.m, Having minimum solid content (ASTM 836) of more than 85% and elongation also more than 400% c)) Supply & application of protective UV top coat @ 0.25kg/sq.m The contrator shall use material from the reputed manifactures such as (\\"Master Builders Solutions\\" \\"MYK Arment\\" \\"DR fixit\\" Alchimice, bostik and Tecnopol) or suitably equivalent mae, as approved by EIC). |
| 69 | Providing & fixing false ceilling at heights with GRG (Glass Fibre Reinforced Gyspum) false ceilling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (psrt 4)-1970 and light reflection of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32mm of length 600mm to form grid module of size 600x600mm, suspended from ceilling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threded hanger rod upto 1000mm length and length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000 mm to be fixed on periphery wall / pertition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specification, drawing and as per directions of the engineer-in-Charge. (A) With Semi perforated 12mm thick micro tegular edged GRG false ceilling tiles |
| 70 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. a)one light point or one fan point controlled by one switch with cables1.5 sqmm size. |
| 71 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. b)One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sqmm size. |
| 72 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. c)One 3 pin socket outlet 5 amps on indepedent with cables 2.5 sqmm size. |
| 73 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit a) 2x2.5 sqmm + 1x2.5 sqmm earth wire |
| 74 | Material & Labour for connecting to the system 1 module modular type switches 6A single pole one way (Make:,LEGRAND /ANCHOR/ Litaski/ Crabtree) or Suitably equivalent make |
| 75 | Supply, fixing and connecting to the system of socket, 6A-2/3 pin combined modular type 2 module (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree) or Suitably equivalent make |
| 76 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete (Make: Havells/ Philips/ Wipro/ Bajaj/ CG/ Luker) or suitably equivalent make |
| 77 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.(Make: Havells/ Philips/ Wipro/ Bajaj/ CG/ Luker) suitably equivalent make |
| 78 | Supply and fixing of LED ceilig/Recess mounting complete with suitable LED lamp and acessories 24 to 30 watts and minimum system output 1800 lumens.(Make: Havells/ Philips/ Wipro/ Bajaj/ CG/ Luker) suitably equivalent make |
| 79 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm. (Make: Havells/ CG/ Bajaj/Almonard) suitably equivalent make |
| 80 | Supply & fixing of 3 module modular white cover plate with frame |
| 81 | Supply & fixing of metal flush box for 3 module plate |
| 82 | Supply & fixing of 6 module modular white cover plate with frame |
| 83 | Supply & fixing of metal flush box for 6 module plate |
| 84 | Supply & fixing of 8 module modular white cover plate with frame. |
| 85 | Supply & fixing metal flush box for 8 module plate |
| 86 | Supply & Fixing of modular type Dummy plate. |
| 87 | Material & Labour for ceiling rose, 3 Phase/PVC/polycorbonate, isolated body. |
| 88 | Supply, fixing & connecting to the system of Sheet metal enclosures with double door DB's 240 V when MCB'S to be used single pole & neutral 8 way with 200 amps rated busbar, (Make: Legrand/Havells/ Hager/ABB) or Suitably equivalent make |
| 89 | Supply and fixing of SP 6 to 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (Make: ABB/Legrand/ Havells/Hager) or Suitably equivalent make |
| 90 | Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 32 AMP current carrying capacity,in the MCB DB complete with connection testing and commissioning. |
| 91 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated strandard aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 core, 10 sq. mm nominal cross section in service connections. |
| 92 | Material and labourEarth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 8mm dia galvanised ironor steel wire Please Enable Macros to View BoQ information |
