|
| 1 | Taking down 20 mm bore steel tubing /PPR and connections including cleaning for re-fixing or removal from site and making good dismantled portion as requird complete all as specified and directed. |
| 2 | Refixing 20 mm bore old steel tubing and connection in new or old position walls, celing ,roof etc complete all as specified and directed.Note: Old GI obtain for BOQ item No 1.00. |
| 3 | S&F 20 mm bore tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings,roofs or laid in floors complete all as specified and directed. |
| 4 | Taking down15 mm bore steel tubing /PPR and connections including cleaning for re-fixing or removal from site and making good dismantled portion as required complete all as specified and directed. |
| 5 | Refixing 15 mm bore old steel tubing and connection in new or old position walls, celing ,roof etc complete all as specified and directed.Note: Old GI obtain for BOQ item No 4.00. |
| 6 | S&F 15 mm bore tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings,roofs or laid in floors complete all as specified and directed. |
| 7 | S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including flush pipe, brackets, rubber bush, washers etc complete all as specified and directed. |
| 8 | S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with 'P' or 'S' trap front or back inlet including footrest (excluding fluxing cistern and flush pipe) complete all as specified and directed. |
| 9 | S&F in repairs glazed earthen ware viterous china wash down water closet(pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etc complete all as specified and directed. |
| 10 | S&F in repairs Vitreous china wash basin white flat back size 550 x 400mm incl waste pipe chain plug brackets complete all as specified and directed. |
| 11 | S&F in repair 15mm bore, brass chromium plated basin mixer screwed down high pressure with or without lettered Hot ot Cold with long screwed and fly nuts screwed for pipe and fixed complete all as specified and directed. |
| 12 | S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed |
| 13 | S&F in repair CP jet Spray heavy duty with PVC connection complete all as specified and directed. |
| 14 | S&F in repair Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed. |
| 15 | S&F in repair 15 mm bore brass chromium plated wall mixer two-in-one hot & cold water screwed down, screwed for iron pipe complete all as specified and directed. |
| 16 | S&F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 17 | S&F in repair 15mm dia brass chromium plated two way bib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 18 | S&F in repair 15 mm bore CP Stop valve / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed. |
| 19 | S&F in repair 15 mm bore CP two way angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed. |
| 20 | S&F in repair 15 mm bore CP concealed Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed. |
| 21 | S&F in repair soap dish brass chromium plated of approximate size 100mm x 80mm complete all as specified and directed. |
| 22 | S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm bore suitable for wash hand basin complete all as specified and directed. |
| 23 | S&F inrepair 32mm CP Waste coupling (half or full threaded) in suitable for Sink complete all as specified and directed. |
| 24 | S&F in repair 32 mm dia PVC flexible waste pipe 800mm long etc. complete all as specified and directed. |
| 25 | S&F in repair mirror cabinet PTMT size 350 x 445mm fixed with screws complete all as specified and directed. |
| 26 | S&F in repairs 600x450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 27 | S&F in repair tubular towel rail 60 cm length of stainless steel 20 mm dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 28 | S&F in repairs CP shower rose 125mm dia alongwith 750 mm long shower arm complete all as specified and directed. |
| 29 | S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 30 | S&F in repair 150 mm square stainless steel grade 304 grating with openable flap complete all as specified and directed. |
| 31 | S&F in repair 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified & directed. |
| 32 | S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed. . |
| 33 | S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed. |
| 34 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed. |
| 35 | S&F in repair ball valve (float valve) high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (20mm bore dia of pipe ) complete all as specified and directed. |
| 36 | S&F in repairs plastic WC seat cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed. |
| 37 | S&F in repair stop valve of PTMT any colour high pressure screwed for iron pipe or for union and fixed in repairs bore of pipe 20mm, (min wt 92 gms) all as specified and directed. |
| 38 | S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe or for union, bore of pipe 15mm (min wt 90 gms), complete all as specified and directed. |
| 39 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed. |
| 40 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed |
| 41 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed but except brick. Note:- Bricks obtained from item No 39 shall be reused after cleaning and extra payment shall be made on this account. |
| 42 | M&L Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & directed |
| 43 | Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 44 | M&L for 5 mm thick smart care ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over ceiling surface complete all as specified and directed |
| 45 | M&L for 10 to 12mm thick smart care ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over interior surface of wall complete all as specified and directed |
| 46 | M&L for 15 mm smart care ready mix repair plaster is specially designed ready to use cement-based plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over exterior wall surface complete all as specified and directed |
| 47 | M&L washed stone grit plaster on exterior walls in two layers under layer 12 mm thick cement plaster 1:4 (1 cement 4 coarse sand furrowing the under layer with scratching tool applying cement slurry on the layer @ 3 Kg of cement per sqm, top layer 15mm cement plaster 1:1/2:2 (1 cement 1/2 coarse sand :2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern incl. scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified and directed. |
| 48 | M&L for forming groove of uniform size 15mm wide and 15 deep in the top layer of washed stone girthplaster as per approved pattern using wooden battens ,nailed to the under layer including removal of wooden battens repair tothe edges of panes and finishing the groove complete all as specified and directed. |
| 49 | Providing & applying rising damp-proof costing system with single component ready to use damp- proof coating Roff Hydamp : 1. Surface preparation thoroughly brush and clean all laltance, loose particles such as dirt, grease, mortar droppings , release agents, efflorescence, bird droppings , etc. All large volds or hollow portions must be removed and re-plastered , Non - moving cracks having width upto 5 mm must be filled with polymer based brack filler. 2. APPLICATION : Apply the first coat of forsroc Nito proof with a paint brush directly on the prepared surfaces by mixing (1 part base : 1 part hardner : 1 part of water). Allow to dry for a minimum 2-3 hrs . Apply one part of DAMP protect a two-component, elastomeric cementitious coating designed to treat dampness, particularly from the negative side ,12 to 15 sq. ft. per kg per coat and apply white cement / Birla putty and make the putty , apply putty on the entire surface area. Allow it to dry for at least 3-4 hours . Apply the Final coat of Nito proof classic on the entire surface and allow the surface to air cure 48 hours proceeds for Paint. |
| 50 | M&L for applying one coats of oil bound distemper with roller on old decorated wall surfaces including preparation of old wall etc complete all as specified and directed. |
| 51 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed. |
| 52 | M&L for applying one coats of synthetic enamel paint including preparation of old steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed. |
| 53 | M&L for applying one coat of synthetic enamel paint including preparation of old wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed. |
| 54 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 55 | S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed. |
| 56 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with cli complete all as specified and directed. |
| 57 | M&L nomiinal mix 1:2:4 Type B0 using (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and beams etc. complete all as specified and directed. |
| 58 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping rough finished surfaces of concrete flat etc. complete all as specified and directed. |
| 59 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished surfaces of concrete. complete all as specified and directed. |
| 60 | S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 61 | S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 62 | S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 63 | S&F 75 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed. |
| 64 | S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 65 | S&F 110 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed. |
| 66 | S&F 110 mm bore PVC (SWR) single T with access door of any radius complete all as specified & directed. |
| 67 | S&F in 110 mm bore PVC (SWR) single Y with access door of any radius complete all as specified & directed. |
| 68 | S&F 110 mm bore PVC (SWR) cowl of any radius complete all as specified & directed. |
| 69 | Taking down existing sunken portion treatment by demolition of old concrete and carry out the sunken treatment as in following steps given below and procedure as per Appendix'A' of particular specifications.(a) S & F of drainage spout GI pipe 40mm dia bore light grade upto outside or outer wall ( Apprx 450mm to 600mm long).(b) M & L for PCC 1:1.5:3 type A-0 (using 12.50mm graded stone agg) 50mm thick laid in slope towards drainage out spout pipe mixed with waterproofing chemical as per manufacturer instructions for Khurra 150mmx150mm (min) at appropriate location for free flow (of leaked water if any) towards drainage spouts shall be provided integrally while laying PCC. Fixing of spout shall be done with same PCC as in this item.(c) M & L for 18mm thick cement plaster in CM 1:3 on verticalfaces mixed with water proofing chemical while concrete is green and proper curing and ponding test shall be done before laying dfrainage water supply pipes upto the entire satisfaction of Engineer-In-Charge.(d) Applying two coats of seal coat on vertical as well as horizontal surface.(e) Drainage and water supply pipe if required and test for leakage /sanitary pipes and shall be laid to slope and a clear gap underneath the pipes shall be made avbailable by providing suitable cement concrete block.(f) M & L PCC 1:5:10 type E-2 using 40mm graded stone aggregate as reqd depth at site over and including 150mm thick 20mm single sized stone agg to provide a filter media.(g) M&L PCC 25mm thick 1:2:4 type B-0 using 12.5 mm graded stone aggregate for level course.(h) M&L for 7 to 8 mm thick non skid ceramic coloured joint less tiles (aquare/rectangur) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc laid jointing in neat cement slurry and pointed filled with epoxy chemical mixed with pigment to match with shade of tiles over and including 15mm thick screed bed in CM(1:6) complete all as specified and directed.Note : (i) Waterproofing treatment shall be undertaken alongwith laying of drainage pipe/sanitary pipes/drainage spout etc.(ii) The work shall be carried out as per the direction of Engineer-In-Charge.(iii) The sunken treatment work shall only be carried out after written approval of Engineer in charge for leakage/seapage of water/ sanitary pipes.(iv) Cost of drainage spout shall deemed to be included in the item however sanitary pipe, water pipe line if required shall be paid separately under respective items.(v) Laying of chemicl required for various applications shall be as per manufacturer instructions.(vi) Plan area shall only be measured and paid. |
| 70 | S&F in repairs 75x125mm dia of PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed. |
| 71 | S&F in repairs 125/110 mm dia of PVC (SWR) Gully trap, plain with grating incl jointing with solvent cement complete all as specified and directed. |
| 72 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 73 | M&L for 75mm thick PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in sub base of floor/path/paving and plinth protection finished even and smooth without using extra cement all as specified. |
| 74 | M&L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of flooring finished even and fair without using extra cement complete all as specified & directed. |
| 75 | M& L for cement concrete 1:2:4 type B -0 using 12.5 mm graded stone aggregates as in benching, coping completed all as specified and directed. |
| 76 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 77 | M&L for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed. |
| 78 | M&L for coloured glazed ceramic tiles in vertical surface 600x1200x 8-10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed. |
| 79 | M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exc. 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of CM (1:6) complete all as specified and directed. |
| 80 | M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exc. 0.18 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed. |
| 81 | M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed. |
| 82 | M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed. |
| 83 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed. |
| 84 | M&L Machine cut kota stone slab flooring 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20mm thick screed bed CM (1:6) complete all as specified and directed. |
| 85 | M&L Machine cut kota stone 20 mm thick as in riser of step, skirting,dado and pillar etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing laid over and including 15mm thick rendering CM (1:4) complete all as specified and directed. |
| 86 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in marble in steps, pillars, wndow cills, pillars, window cills, cooking platforms and like in CM (1:4) incl pointing in white cement (1:2) match the shade of the slab using marble dust with admixture of pigment to match with shade of granite including rubbing and polishing incl 20mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 87 | Supply for Pipe Supporting Clamping in repairs- Single Pipe of PVC dia 110 mm (4\\") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 100 mm (4\\"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 100 mm (4\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted \\"C\\" Channel with ribs to be used of size 250 mm (10\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material 48mm x 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 100 mm (4\\") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10\\") - 1 No.; 3. U Bolt Rubber sleeve mounted for 110 mm (4\\") PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. |
| 88 | Supply for Pipe Supporting Clamping in repairs Single Pipe of PVC dia 75 mm (3\\") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 100 mm (4\\"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 100 mm (4\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted \\"C\\" Channel with ribs to be used of size 250 mm (10\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material 48mm x 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. unit : 1. Profile Bracket Wall distance 100 mm (4\\") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10\\") - 1 No.; 3. U Bolt Rubber Sleeve mounted for 75 mm (3\\") PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. |
| 89 | Four 20 mm Water supply Pipes Gi Or UpvcSupply for Toilet Duct Pipelines for Overhead Tank Riser & Domestic Water Pipes downtake pipes fixing done with Pipe Supporting Clamping System having Profile Bracket+ Slotted C Channel + U Bolt RM System-1. Overhead Tank Riser Domestic Water Supply Down take lines 3/4\\" GI-4 nos. from Terrace to 1st Floor Vertical Fixed line with wall distance 4\\": Pipe Support Clamping made of: 1. Profile Bracket Wall Distance 4\\" made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Slotted \\"C\\" Channel B3 Type to be used of size 18\\" (Continuous Slotted \\"C\\" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material 48mm x 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923-Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985)-610 grams/m2 (>85 microns). Material Grade: IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty: 1. Profile Bracket Wall distance 4\\"-2 Nos. 2. Continuous Slotted C Channel of B3 Type Size 18\\"-1 No; 3. U Bolt R/M for 3/4\\" GI pipe Dia. -4 nos. 4. Justi Khilla Gl coated 2 1/2\\"-4 nos. Fixing details:Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. Please Enable Macros to View BoQ information |
