|
| 1 | Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified and directed. |
| 2 | M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and directed. |
| 3 | M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed. |
| 4 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises,removing the demolished material out of MOD land complete all as specified. |
| 5 | Demolition cement concrete (unreinforced) in ground floors and paving n exc 15 cm thick and removing the demolished material out of MOD land complete all as specified. |
| 6 | M&L for Non skid ceramic coloured tiles 7-8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 15 mm th screed ded in cm 1:6 all as specified and directed |
| 7 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified and directed. |
| 8 | S&F non skid coloured ceramic tiles coloured of 7 to 8 mm (square/ rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed. |
| 9 | All as per item No 7.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 10 | S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified and directed. |
| 11 | M&L for Designer wall cladding wall tiles of any Size and any design required as per direction of Engr-in-Charge laid in required pattern vertical surface set and jointed in neat 10 mm thick heavy duty, chemical resistant adhesive for fixing tile on wall. Tiles shall be free of any variation in colour or texture, and laying plastic sheet cover on wall and removing when directed including dismantling of existing wall tiling complete all as specified and directed. |
| 12 | M&L for 300x 600mm x 10mm thick Glazed coloured ceramic digital tiles in vertical surface in pattern or concept set and jointed in neat 10 mm thick heavy duty, chemical resistant adhesive for fixing tile on wall. Tiles shall be free of any variation in colour or texture, including dismantling of existing wall tiling complete all as specified and directed. |
| 13 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortar etc complete all as specified and directed. |
| 14 | M&L for Makrana white marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, floors and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 15 | M&L for 16mm-18mm thick black granite stone slab machine cut in floors, cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. |
| 16 | M&L for 16-18mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. |
| 17 | Providing edge moulding to 18-20mm thick stone of counters vanities etc, including macine polishing to edge to give high gloss finish etc, complete all as specified and directed. |
| 18 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed. |
| 19 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified and directed. |
| 20 | S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 21 | S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. |
| 22 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. |
| 23 | S&F stainless steel butt hinges 100mm in size complete all as specified and directed. |
| 24 | S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed |
| 25 | S&F aluminium anodised barrel tower bolts extruded section of size 200 mm, all as specified and directed |
| 26 | S&F aluminium handle extruded fabricate type anodised of size 150 mm complete all as spd and directed. |
| 27 | S&F steel windows with pressed steel frame made out form 1.25mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hings peg stay handles tower bolts lugs including treated with for or coal tar black paint on steel surface in contact/embedded in concrete/masonry work complete all as specified and directed Note- Disturbed suface of wall shall be made good to true surface |
| 28 | S&F powder coated Anodised aluminium window and ventilator shutters, fixed typewithout sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 29 | M&L for Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed. |
| 30 | S&F, MS angle iron framed work as in doors or gates of angle or other section conforming to Fe 290(Gde E-165) with gusset plates, rails, braces, etc complete including hanging also fastening and fixing complete as specified and directed. |
| 31 | Hacking out old broken glass (any thickness, size, quality or description) not exc 0.5 sq.m from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 32 | M&L for 3mm thick figured glass, pin head type and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed. |
| 33 | S&F Glazing with sheet, 3mm thick, ordinary quality and glazing with oil putty and glazing pins in squares exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 34 | M&L for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed. |
| 35 | S & F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides face is covered with decorative face veneer with lipping/frame to match all as specified and directed |
| 36 | S&F Glazed and skelton shutters 30 mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring witre mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a). complete all as specified and directed. |
| 37 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 38 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 39 | Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets.complete all as specified and directed. |
| 40 | S&F for anodisied aluminium snap grid of size 605 x 605mm frame work for false ceiling complete all as specified and directed. |
| 41 | S&F Hangers 6mm dia GI (upto 1200m length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long complete all as specified and directed. |
| 42 | S&F fiber cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminum frame work with screws/clips complete all as per manufactures instructions and as complete all as specified and directed. |
| 43 | Providing & fixing fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of perforated Size 595 x 595 mm of approved texture, 12mm (b) Semi With perforated 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 44 | Dismantling boarding, any description fixed in any position fixed with screws complete all as specified and directed. |
| 45 | M&L for in repair, 18/19mm thick MDF Solid board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated complete all as specified and directed. |
| 46 | S&F 6 mm thick one side prelaminated decorative WPC sheet and other side plain in cupboard & like items inclusive of solvent cement & fixing at site complete all as specified and directed.. |
| 47 | S&F Modular auto concealed soft closed hinges 35mm 110 degree size complete all as specified and directed. |
| 48 | S&F stainless steel handle 200mm complete all as specified and directed. |
| 49 | S&F stainless steel handle 150mm complete all as specified and directed. |
| 50 | S&F PVC tape 18mm wide with adhesive complete all as specified and directed. |
| 51 | S&F for Telescopic drawer channel rollers for shelves of size 300mm long complete stainless steel of grade 304 complete all as specified and directed. |
| 52 | S&F for Telescopic drawer channel rollers for shelves of size 500mm long complete stainless steel of grade 304 complete all as specified and directed. |
| 53 | M&L for 18mm thick designer WPC Jalli exterior grade of design, shape and colour as approved by Engineer in charge conforming to IS 2380 incl necessary fitting fixed to wall or pole/trusses complete all as specified and directed. |
| 54 | M&L for repairs to mouth of drain out pipe by applying solvent free, moisture insensitive epoxy resin-based patch repair putty on pipe penetration surfaces including cutting a minimum 25 to 40mm wide groove around the mouth of 100 to 200 mm bore rain water pipe and cleaning, washing with water, making dust free surface, filling the cavities in the sides at mouth of pipe section with suitable free flowing Grout Material of Sika/ STP/ Fosroc/ Dr Fixit as approved, to a thickness of minimum 20mm alaround on pipe and concrete joint, all as per manufacturer's specifications/ instructions, finishing smooth the pipe mouth with rounded edges for proper flow of rain water, all complete as specified and directed. Note :-The work shall be carried out upto 10mtr bldg height. |
| 55 | M&L for applying a coat of cement slurry @ 0.488 Kg/Sqm mixed with tapercreate @ 0.253 Kg/Sqm after cleaning and drying the old/new surfaces(Make of tapercreate M/S CICO Engg Services) then applying the layer of fibre glass cloth while the above coat is still green. The overlap of fibre glass cloth shall be not less than 100 mm.(Make of fibre glass cloth M/S The Structure Water Proofing Co Pvt Ltd) and then applying 1.5 mm thick layer @ 1.288 Kg/Sqm mixed with taper create @ 0.570 Kg/Sqm and coarse sand @ 1.289 Kg/Sqm. Allow the treatment to air curing for four hours followed by water curing for 48 hours complete all as specified and directed. |
| 56 | M&L for 10 mm thick cement plaster on brick/ concrete surface in CM 1:3, but mixing water proofing compound at the rate of 2% of cement by weight (WPC shall be paid separately) complete all as specified and directed. |
| 57 | M&L for Cement concrete Type F2 (1:5:10) using 40 mm graded stone aggregate in mass concrete in sunken floor complete all as specified. |
| 58 | M&L for 75 mm thick PCC type D2 (1:4:8) using 40 mm graded stone aggregate as in sub base of flooring complete all as specified and directed. |
| 59 | M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floors finished rough complete all as specified and directed. |
| 60 | Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc and brushing and applying neat cement slurry with 3.0 Kg of cement per sq metre complete all as specified and directed. |
| 61 | S&F Factory made modular FRP Chajjas with MS Flats 40 x 2mm, minimum 06 Nos Hold and Fastner including cutting/chesling of required thickness (As per manufacturer instruction) of wall or as per direction of Engr-in-Charge for upto 10 mtr height of building and making good disturb portion including demolition of reinforcement cement concrete chajjas as suitable method and as per direction of Engr-in-Charge, all as specified and directed. |
| 62 | S&F, 20 mm dia bore curtain rod of 1.6 mm thickness stainless steel SS - 304 grade including stainless steel heavy duty bracket and end bulbs complete all as specified and directed. |
| 63 | Cutting of shrubs/bushes and small plants/vegetation including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified and directed. |
| 64 | M & L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 65 | M & L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed. |
| 66 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 67 | S&F 4.80mm thick sheet glass, ordinary quality and glazing with oil putty in square complete all as specified and directed. |
| 68 | S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on aluminium partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed. |
| 69 | S & F in repair hollow PVC Wall Lining consisting of 5mm thick printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and all as specified and directed |
| 70 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 71 | M & L for Solid PVC Wall Lining/Panelling /louvers consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 72 | M&L for kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match thick shade of the slab including rubbing and polishing laid over 15mm thick screed bed in cm (1:6) complete all as specified and directed. |
| 73 | All as per item No 23 above here-in-before but on vertical surfaces of walls /skirting/dado etc complete all as specified and directed. |
| 74 | M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete. complete all as specified and directed. |
| 75 | M& L for 125mm long SS handles, cast type, polished bright fixed with ss screw complete all as specified. |
| 76 | M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel over one coat of primer all as specified & directed |
| 77 | M&L for preparation of old steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel over one coat of primer all as specified & directed |
| 78 | M&L for preparation of newly or previously untreated wooden surface of any description over 10cm width or girth and applying two coat of synthetic enamel over one coat of primer all as specified & directed |
| 79 | M&L for preparation of old or previously untreated wood surface of any description over 10cm width or girth and applying one coat of synthetic enamel over one coat of primer all as specified & directed |
| 80 | S&F, in repair, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed. |
| 81 | Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 82 | M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed. |
| 83 | M&L for Rendering 5 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement on ceiling in cement mortar (1:3), complete all as specified. |
| 84 | M& L for preparing plastered new surfaces of ceiling and applying two coats of white wash on ceiling surface complete all as specified and directed. |
| 85 | M&L for 15 mm thick rendering using ready mix plaster bags in cement mortar1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @200ML weight of 50kg cement or as per manufacturer instructions complete all as specified and directed : Note:- Water proofing compound shall be measured and paid separately |
| 86 | M&L for two component polymer modified flexible cementitious waterproof (breathable) coating of equivalent flexible and elastic polymer modified, 2 component cementitious coating system having UV resistance applied in 2 coats in the form of slurry at right angles by way of brush at a total consumption of 2 Kg per sqm over the vertical brick wall, curing, testing etc completed including gola vata & joints treatment etc. complete all as specified and as diected by Engr-in-charge. |
| 87 | M&L for providing protective levelling plaster for horizontal & vertical surfaces of average 15 thick in cement mortar (1:4) including mixed with liquid integral waterproofing admixture @ 200 ml per bag of cement, finished smooth, curing etc. complete as specified and as diected by Engr-in-charge. |
| 88 | Supply Liquid water proofing compound complete all as specified and directed. |
| 89 | M&L for 1 coat of priming plastered and other surface with alkali resistant priming paint using roller complete all as specified and directed. |
| 90 | M & L for newly plastered surfaces of wall applying two coats of distemper oil emulsion complete all as specified and directed. |
| 91 | Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.complete all as specified and directed. |
| 92 | M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified and directed. |
| 93 | M& L for preparing plastered Old surfaces of ceiling and walls applying two coats of white wash complete all as specified and directed. |
| 94 | M & L for 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement, complete all as specified & directed. |
| 95 | M& L for preparing newly plastered plastered surfaces of walls applying two coats of white wash complete all as specified and directed. |
| 96 | Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed. |
| 97 | All as per Sl Item No.62 here-in-before but 20 mm bore pipe complete all as specified and directed. |
| 98 | Supplying and laying of 15mm bore galvanized iron tubes medium grade with all fittings and fixed on walls/ceiling or laying in floors complete all as specified. |
| 99 | Supplying and laying of 20mm bore galvanized iron tubes medium grade with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed. |
| 100 | S&Fin repair Bib taps CP,fancy type ISI marked with crutch or butter fly handles screwed down screwed for iron pipe or for brass ferrule and fixed to 15mm bore and add if fixed in repairs complete all as specified and directed. |
| 101 | S&Fin repair Bib taps Copper alloy,fancy type ISI marked with crutch or butter fly handles screwed down screwed for iron pipe or for brass ferrule and fixed to 15mm bore and add if fixed in repairs complete all as specified and directed. |
| 102 | S&Fin repair fancy type long body Bib tap standard of PTMT any colour high Pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/20mm 125gms). e of 15mm bore and add if fixed in repairs complete all as specified and directed. |
| 103 | S& F in repairs fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms) complete all as specified and directed. |
| 104 | S& F in repairs Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 105 | S&F in repairs 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and directed. |
| 106 | S&F in repairs 40mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and directed. |
| 107 | S&F in repairs fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' withlong screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 108 | S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 109 | S&F in Floor 140mm over all length with flap door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 110 | S&F fancy type CP angle valve/concealed stop cock of cast copper alloy (ISI Marked) chromium plated fancy type scrwed down high pressure with capstain head screwed both ends for iron pipe 20mm bore complete all as specified and as directed |
| 111 | S&F in repairs Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed. |
| 112 | S&F PVC Bath cabinet with mirror 18\\"x22\\"x4.25\\". Make: commander or equivalent complete all as specified and directed. |
| 113 | S&F in repairs vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 114 | S&F, in repairs, Health faucet cast copper alloy chromium plated with 1m flexible chrome hose and SS wall hooks complete all as specified and directed. |
| 115 | Toilet paper holder chromium plated conforming to the samples kept in the office of Engineer-in-Charge. complete all as specified and directed. |
| 116 | S&F in repair wash hand basin Counter Top , white, flat back, size 550 x 450 x 200mm)) , including cutting and or all as specified and directed. (Including 15mm bore CP pillar tap, waste coupling and 32mm dia PVC waste pipe) complete all as specified and directed. |
| 117 | S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified and directed. |
| 118 | S&f Iin repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 119 | S&F fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. |
| 120 | S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed. |
| 121 | Supply and fixing waste pipe any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed |
| 122 | S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed. |
| 123 | S&F 6mm thick bevel-edged,fixed with stud- type looking mirror of size 900x450mm , made from selected glass quality, with an minimalist frame with an antique finish, securly mounted to the wall ,complete all as specified and as directed.. |
| 124 | Supply & fix in repairs PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. |
| 125 | Supply & fixed, in repair, PVC connections 15mm size with brass/ PVC nut both side of length 600mm complete all as specified and directed. |
| 126 | Supply & fixed, in repair, PVC connections 15mm size with brass/ PVC nut both side of length 600mm complete all as specified and directed. |
| 127 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing with Granite Stone and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 128 | S&F in repair Brass chromium plated shower rose 125mm size all as specified and directed |
| 129 | S&F in repair CP soap dish complete all as specified and directed. |
| 130 | S &F in repair CP grating doom 100mm dia complete all as specified and directed. |
| 131 | Supply and fix in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc and supply and fixing powder coated aluminium frame and stainless steel ring to hold 75mm pipes in place at 1.5 mtr c/c to be fixed to wall as per site requirement all as specified and directed by Engr-in-charge |
| 132 | Supply and fix in repais 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes and supply and fixing powder coated aluminium frame and stainless steel ring to hold 75mm pipes in place at 1.5 mtr c/c to be fixed to wall as per site requirement complete all as specified & directed. |
| 133 | S&F in repair vitreous china ware single piece with cistern EWC complete with internal fittings as specified and directed by Engineer-in-Charge. |
| 134 | S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect complete all as specified and directed. |
| 135 | S&F factory made 600 x 450 mm beveled edge mirror 5.5mm thick of selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers (In repairs) complete all as specified and directed. |
| 136 | S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed. |
| 137 | Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed. |
| 138 | Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed. |
| 139 | S&F 110mm PVC (SWR) vent cowl complete all as specified and directed. |
| 140 | S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 141 | S^F 110mm PVC (SWR) 'S' trap complete all as specified and directed. |
| 142 | S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair)complete all as specified and directed. |
| 143 | S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed. |
| 144 | Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified and directed. |
| 145 | M&L for pcc 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work. complete all as specified and directed. |
| 146 | Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete. complete all as specified and directed. |
| 147 | S&F for triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks any type & removing complete all as specified and directed. |
| 148 | S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 149 | M&L for chequered cement concrete colour tiles size 20 cmx20mmx25 mm thick, with grey pigment cement and colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified and directed. |
| 150 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified and directed. |
| 151 | S&F in repair vitreous china urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe and waste pipe complete all as specified and directed. |
| 152 | S&F in repair vitreous china wall mounted Sensor -Operated urinal complete with automatic infrared sensor flusing system ,concealed flush valve and all necessary fittings, sensor shall be touch-free, battery or mains operated and designed for water-efficient flushing, complete all as specified and directed. |
| 153 | Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified and directed. |
| 154 | M & L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:6.including all neccesary formwork & finishing exposed concrete surface all as specified and directed |
| 155 | M&L for vitrified ceramic tiles light shade 10 mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc, with neat cement slurry over and including 15 mm thick screed bed of cement mortar 1:6 including pointing in white or coloured cement with pigment to match the shade of tiles complete all as specified and directed. |
| 156 | All as per item Srl item No 156 here-in-before but on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar 1:4 as backing coat complete all as specified and directed. |
| 157 | M&L for Cleaning and removing all scale and dirt from water tank exc 250 ltr not exc 500 ltr etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed. |
| 158 | M&L for Cleaning and removing all scale and dirt from water tank exc 500 ltr not exc 1000 ltr etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
