|
| 1 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but including ashlar facings dressed stone work and pre cast concrete articles complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | Demolition of cement conc in ground floor and pavings not exceeding 15 cm thick above or below ground level. |
| 3 | Material and labour for brick work built in cement mortar (1: 6) with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius, using old size bricks complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | -ditto- as per item no above except Brick complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | Taking down cement plaster of any description on brick or stone wall as in boundary wall etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed by the Engineer in Charge. |
| 6 | Material and labour for rendering 15 mm thick cement plaster in cement mortar (1:4) of brick / concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 7 | M & L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings and providing grooves .complete all as specified |
| 8 | Material and labour for preparation of new surfaces of walls including cornices, pilasters etc (Plastered or un plastered surfaces) and applying two of coats of cement base paint over a coat of alkali primer complete all as specified & directed by the Engineer in Charge. |
| 9 | Material and labour for plain cement concrete (1:3:6), type C-2 using 40mm graded crushed stone aggregate, as in surface channel complete all as specified and directed by the Engineer-in-Charge. |
| 10 | M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in–Charge. |
| 11 | Demolition of Stone slabs and tiles laid,bedded and pointd in any mortar of any description or thickness in floors, aprons etc |
| 12 | M & L Machine pressed precast conc. interlocking paver block cosmic paver vlock (rectangulat/star etc.) (Red/yellow)any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and with pigment complete all as specified and directed by Engr - in - Charge. |
| 13 | ditto- all as per items No 12 above except tile complete all as per directed by engr-in- charge |
| 14 | M & L Machine pressed precast conc. interlocking paver block /cosmic paver block any shape (rectangulat/star with PU coating etc.) (Red/yellow)any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and with pigment complete all as specified and directed by Engr - in - Charge. |
| 15 | Providing and laying precast cement concrete at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening with PVC Pipe wherever required and apply two coats of plastic emulsion paint over a priming paint plaster coat complete all as specified and directed by Engineer -in charge. |
| 16 | M & L Cement concrete 1:2:4 type B–1 using 20mm graded stone aggregates in copings,, including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed by Engineer - in - Charge . |
| 17 | Dismantling of galvanised mild steel barbed wire of any description from fencing post (RCC/ Steel) complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Supply and fix in repairs galvanised 2 strand steel barbed wire 2.24 mm dia , barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed by Engr-in-Charge. (Each line wire to be measured) |
| 19 | All as per Item No 18 above here-in-before but restraining re-securing including making good staples etc. complete all as specified and directed by Engr-in-Charge. (Each line wire to be measured) |
| 20 | M & L for chequered cement concrete coloured tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry and pigments as in floors over and including 20 mm thick screed or bedding layer in CM 1:6 all as specified and directed by Engineer-in Charge |
| 21 | Material and labour for mild steel round bars 10mm dia Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) as in reinforcement cut to length, bent to shape including cranking bending, and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed by Engineer-in-charge. |
| 22 | M&L providing precast cement concrete louvres and jallies, with RCC post 50 mm thick (measured solid), type B-0(1:2:4) using 12.5mm graded aggregate including all mould- ings but excluding frame set in cement mortar 1:4 complete all as specified and directed by Engr-In-Charge |
| 23 | Dismantling wooden boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in Charge. |
| 24 | M&L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed or bedding layer in CM 1:6 all as specified and directed by Engineer-in Charge |
| 25 | Dismantling fencing wire mesh, any type complete all as specified and as directed by the Engineer-in-Charge. |
| 26 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engr-in-charge |
| 27 | Supply only Chain link fencing made out of plain mild steel galvinised wire , width of aperature 75 mm x 75 mm x 4mm dia to new steel posts by means of nuts and bolts, complete all as specified and directed by Engineer - in – Charge |
| 28 | Dismantling posts or struts embedded (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground |
| 29 | S&F for Mild steel angle iron fencing post and struts in fencing incl necessary cutting drilling welding etc and bending to swan neck shape as required and drilling holes notching for wires etc conforming to Fe-290 Gde E-165 complete all as specified. |
| 30 | M&L Plain Cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in Charge. |
| 31 | S&F mild steel screw bolts 12mm dia(machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but n. exc. 15 cm long and dia of shank 5 to 10 mm complete all as specified and directed. |
| 32 | M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed. |
| 33 | M&L for preparation of new steel surfaces n exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifed and directed. |
| 34 | M&L for PCC type D2 1:4:8 using 40 mm graded aggregate as in foundations, filling and mass concrete all as specified and directed |
| 35 | Supply and fixing informatory Sign board of size 1200 mm x 900 mm made of aluminium sheet 2 mm thick with stainless steel rectangular frame using 25 x 15 mm rectangular pipe with 35 mm dia stainless pipe in outer border all around retro reflective high intensity 400 micron thick blue/yellow colour sheet pasted with heating process on both bsides of the board including 75 mm to 100 mm high black colour letters cut to shape with special plotter and in proper manner incidating Shed No as directed by Engr in charge .02 Nos 75 mm dia stainless steel pipes of 304 grade glossy finish with MS plate 3 mm thick welded at bottom of pipes shall be provided the board shall be fixed at height of 3.0 mm (top level of board) above GL and shall be embedded in ground using PCC 1:2:4 type B-1 of min size 300mmx300mmx600mm including necessary from work.excavartion and earthbwrk complete all as specified and directed. |
| 36 | Demolition of precast reinforced concrete manhole cover of any description and in any position not otherwise specifically provided for |
| 37 | M & L TMT bars 6mm to 8mm dia. cut to length bent to shape required including cranking, bending and binding with and including MS wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified |
| 38 | Material and labour for Providing precast factory made cement concrete1:2:4 Type B1 (20 mm graded aggregate ) set in cement mortar 1:4 for different sizes of cover slabs (for man holes and drains etc.) chajjas, water troughs, mangers, shelves and similar articles with plain faces complete after placing in position over septic tanks/manhole covers/drain covers complete all as specified and directed by the Engineer in Charge. |
| 39 | S & F flat iron , Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled including embeding in concrete and screwing and welding etc. flat iron fillets (for securing wire mesh etc.) ncluding all necessary welding drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed. Please Enable Macros to View BoQ information |
| 40 | S & F flat iron , Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled including embeding in concrete and screwing and welding etc. flat iron fillets (for securing wire mesh etc.) ncluding all necessary welding drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed. Please Enable Macros to View BoQ information |
