|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: SPECIAL REPAIR/ REPLACEMENT OF DI/ CI/ GI PIPE LINES IN AND AROUND THIMMAIYA COLONY OFFICERS MD ACCN AREA UNDER GE (EAST) BAREILLY Contract No : CWE / BLY / GE(E) /35 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking up 100 mm dia duct iron/ CI/ MS/ Flanged/ screwwed water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed. |
| 3 | Taking up 150 mm dia duct iron/ CI/ MS/ Flanged/ screwwed water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed. |
| 4 | Supply and laying of 150 mm dia centrifugally cast (Spun) ductile iron pressure pipe with spigot & socket end, class K-9 in any length laid in trenches, conforming to IS-8329/2000 with cement mortar lining with and including rubber gasket jointing conforming to IS-15382/tyton joint complete with all fittings e.g Tee, Bends etc complete all as specified and directed. |
| 5 | Supply and laying of 100 mm dia centrifugally cast (Spun) ductile iron pressure pipe with spigot & socket end, class K-9 in any length laid in trenches, conforming to IS-8329/2000 with cement mortar lining with and including rubber gasket jointing conforming to IS-15382/tyton joint complete with all fittings e.g Tee, Bends etc complete all as specified and directed. |
| 6 | S&F DI/CI fittings upto 150 mm bore for all spigot and socketed pipes Bends (any type, radius andangle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \\"Y\\" junction, double branch, cross collars, caps and plugs, complete all as specified and as directed. |
| 7 | Supply and lay Pipe Cast iron pipes with flanged ends, centrifugally cast, class B, 100 mm (4\\") dia in any length laid in trenches complete all as specified and directed. |
| 8 | S&F CI/DI fittings for Flanged pipe, Bends. Tapers. Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged upto 150 mm bore complete all as specified and directed. |
| 9 | S&F 100 mm dia MS flanged pipe heavy duty for making water supply distribution header duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified and directed. |
| 10 | S&F 150 mm dia MS flanged pipe heavy duty for making water supply distribution header duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified and directed. |
| 11 | S&F 200 mm dia MS flanged pipe heavy duty for making water supply distribution header duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified and directed. |
| 12 | M&L for provision of new wash out points at 150 mm dia pipe by proper cutting and screwing of existing DI/CI/GI pipe fixing reducer tee of suitable size, supplying and fixing, Jointing, testing CI sluice valve of following size by fixing 02 Nos at each wash out point with flanged ends including necessary mountings nuts, bolts washers and packing fibers gasket on both end and making valve pit chamber including iron frame cover 3.15 mm thick with locking arrangements complete all as specified and directed. |
| 13 | M&L for provision of new wash out points at 100 mm dia pipe by proper cutting and screwing of existing DI/CI/GI pipe fixing reducer tee of suitable size, supplying and fixing, Jointing, testing CI sluice valve of following size by fixing 02 Nos at each wash out point with flanged ends including necessary mountings nuts, bolts washers and packing fibers gasket on both end and making valve pit chamber including iron frame cover 3.15 mm thick with locking arrangements complete all as specified and directed. |
| 14 | M&L for construction of brick masonary valve chamber in repair of size 0.9mx0.9mx 1.0 mtr (internal diamension) above ground level 30 mm suitable for 100 mm dia sluice valve, 15 cm thick foundation using PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) over 15 cm thick hardcore, 23 cm thick brick wall bults in cement and sand motor 1:4, 15 cm thick internal and external plaster including top floor in cement and sand motor 1:3, finished even and smooth, without using extra cement, 3mm thick mild steel plate cover on 50 mm x 50 mm x 6 mm MS angle iron frame embeded in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) coping having rectangular hinged opening of size with locking arrangement & handle made out of 25 cm dia MS round bar, hold fast etc, applying one coats od red oxide primer and two coats of synthetic enemelled paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not ex 50 mtr complete. |
| 15 | Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for laying of electric cables or water pipe etc, not exc 10 sqmm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 16 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil. |
| 17 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified. |
| 18 | Taking up iterlocking paver block any size and stacking at site for reuse at the same site after replacement of pipeline complete all as specified and directed |
| 19 | S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade not less than 0.45 mtr wide for repairing road cut/footpath carried out under respective items. |
| 20 | Relaying old retrieved paver block includin supply and lay with grey cement complete all as specified and directed. |
| 21 | M&L for PCC 1:2:4, type B1 (using 20 mm graded granite stone aggregate) as in coping for steel pole including necessary formwork complete all as specified. |
| 22 | M&L for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) for road/Hard standing cutting complete all as specified and as directed. |
| 23 | Supply, Laying, jointing and leakage testing 50 mm bore dia GI Pipe medium grade including all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches and including dismantling and taking down unserviceable / cracked steel tubing with all fittings of the following sizes as complete all as specified and directed. |
| 24 | Supply, Laying, jointing and leakage testing 25 mm bore dia GI Pipe medium grade including all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches and including dismantling and taking down unserviceable / cracked steel tubing with all fittings of the following sizes as complete all as specified and directed. |
| 25 | Supply, Laying, jointing and leakage testing 20 mm bore dia GI Pipe medium grade including all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches and including dismantling and taking down unserviceable / cracked steel tubing with all fittings of the following sizes as complete all as specified and directed. |
| 26 | S&F 50 mm bore dia Gun-metal, globe or Gate Valve with iron wheel head, screwed bothe ends for iron pipe, ISI marked including taking down of unserviceabel existing gate valve complete all as specified and directed. |
| 27 | S&F 25 mm bore dia Gun-metal, globe or Gate Valve with iron wheel head, screwed bothe ends for iron pipe, ISI marked including taking down of unserviceabel existing gate valve complete all as specified and directed. |
| 28 | S&F 20 mm bore dia Gun-metal, globe or Gate Valve with iron wheel head, screwed bothe ends for iron pipe, ISI marked including taking down of unserviceabel existing gate valve complete all as specified and directed. |
| 29 | S&F in repair 150 mm bore dia sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valve including making arrangement for safe working complete all as specified and directed. |
| 30 | S&F in repair 100 mm bore dia sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valve including making arrangement for safe working complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
