|
| 1 | Attending complaints related to plumbing/water supply and obtaining completion from user including minor repair such as replacement of washers, tightening of taps, tightening of check nuts/unions/sockets/PVC connection etc and making water supply functional in case of blockage, refixing of GI pipe joints, application of white cement where required, complete all as specified and directed. Note : (I )Only experienced 01 Nos plumber shall be used to attend day to day complaints for above mentioned complaint shall be issued under respective item. (II) Contractor or his representative shall collect the complaints at 0830hrs from complaint cell of AGE B/R-II and the complaints shall be attended / make good/rectified within 24hrs on receipt of the complaints and info the status of the complaint at 1700hrs every day to complaint cell. On failure of the same a penalty of Rs 250/- per day per complaints shall be charged. |
| 2 | Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, complete all as specified and directed. Note :- (I)Only experienced 1 Nos carpenter shall be used to attend day to day complaints for above mentioned complaint shall be issued under respective item. (II) Contractor or his representative shall collect the complaints at 0830hrs from complaint cell of AGE B/R-II and the complaints shall be attended / make good/rectified within 24hrs on receipt of the complaints and info the status of the complaint at 1700hrs every day to complaint cell. On failure of the same a penalty of Rs 250/- per day per complaints shall be charged. |
| 3 | Taking down chowkat or frame with shutters including fitting and fixtures area not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed. |
| 4 | Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed. |
| 5 | Taking down shutters of any description exceeding 1 sqm but n. exc 2 sqm each complete all as specified and directed. |
| 6 | S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to velley gutters, winties for roof sheets, framing for monkey proofing, welded mesh, support to sign board & fencing post, etc as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 7 | S&F steel windows with pressed steel frame made out of 1.25mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges, peg stay, handles, tower bolts, lugs including treated with for or coat tar black paint on steel surface in contact/embeded in concrete/masonry work complete all as specified and directed. |
| 8 | S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 9 | S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/M (Minimum) including stainless steel mosquito proofing wire mesh fixed with, clips, frame, necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including supply and fixing 4.8mm thick plain glass complete all as specified and directed. |
| 10 | S&F anodised aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 11 | S&F Powder coated anodised aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed |
| 12 | S&F Powder coated Anodised aluminium door shutters section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, sliding door bolt, tower bolt and anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 13 | S&F 4.8mm thick sheet glass, ordinary quality and glazing with beading in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 14 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 15 | S&F aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 16 | S&F in repairs 140mm floor door stopper of aluminium alloy body and tonge, anodised with hard drawn steel spring complete all as specified and directed. |
| 17 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 18 | S&F 35mm thick made of 2nd class hardwood Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 19 | S&F 35 mm thick, 2nd class hard wood (Sal/ Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (b) for door shutter supplying and fitted to chowkats, complete all as specified and directed. |
| 20 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face pannels, commercial type on both sides, complete all as specified and directed. |
| 21 | S&F Factory Made Solid PVC Moulded door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 22 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S crews shall be paid separately) |
| 24 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 25 | S&F for built in steel cup board with pressed steel frame of size 75 mmx 45 mmx 1.25 mm thick with pressed steel shutter 1 mm thick Godraj pattern fixed to masonary wall by hold fast out of 25x3mm flat iron including MS hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of MS peg set of 3 pegs, locking arrangement including spary painting with two coats of synthetic enamel paint over a coat of red oxide primer to all around on steel surface of frame and shutter and making good distrubed portion in CM 1:3 or PCC 1:2:4, type B0 using 12.5 mm graded stone aggregate complete all as specfied and directed. |
| 26 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 27 | M&L for preparation of new wooden surfaces & applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 28 | M&L for welding in repairs of loose joints of sliding doors, hinges, siliding door bolts, garrage doors, windows, doors, northlight framing, monkey prrofing framing etc inc at any height & inc necessary cutting and grinding all as specified and directed. |
| 29 | S&F in repairs galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire stples complete all as specified and directed |
| 30 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc all as specified and directed. |
| 31 | S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square n exc 0.50 sqm each pane complete all as specified and directed. |
| 32 | S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 33 | S&F 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 34 | S&F 200mm long aluminium anodised, barrel tower boltls of extruded sections and fixed complete.complete all as specified and directed. |
| 35 | S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 36 | S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 37 | S&F in repairs 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 38 | S&F in repairs 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 39 | Taking up or down steel tubing and connection 15 mm bore pipe.complete all as specified and directed. |
| 40 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 41 | S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified and directed. |
| 42 | Dismantling of old water tanks and removing to store and S&F Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 500 ltrs, including 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed. |
| 43 | Dismantling of old water tanks and removing to store and S&F Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed. |
| 44 | S&F in repairs 15mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 45 | S&F in repairs 20mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 46 | S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580x440mm white, with integal foot rests, (excluding flushing cistern and flush pipe) including 110mm bore PVC (SWR) 'P' trap and lime concrete bedding complete all as specified and directed. |
| 47 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including seat and cover and connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. |
| 48 | S&F in repairs vitreous china wash down water closet pan one piece EWCs snow white with duraplast slim soft close seat cover size (670x355x755mm) including connection to outgoing pipe complete all as specified and directed. |
| 49 | S&F in repairs PVC valveless flushing cistern 10 Ltr capacity (white), syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete all as specified and directed. |
| 50 | S&F in repairs Vitreous china wash hand basin, white flat, size 550 x400 mm including brackets, waste coupling and waste pipe complete all as specified and directed. |
| 51 | S&F in repairs Vitreous china wash hand basin with full pedestal snow white including, waste coupling and waste pipe complete all as specified and directed. |
| 52 | S&F in repairs 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Min weight 15mm - 90gms) |
| 53 | S&F in repairs 15mm dia Bib taps, long body cast copper alloy with crutch or butterfly handle, screwed down, fancy type chromium plated screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 54 | S&F in repairs 15mm bore and 50mm long cast copper alloy brass extension nipple suitable to fix CP bib tap/ angle valve complete all as specified and directed. |
| 55 | S&F in repairs 15mm bore Pillar taps, Swan neck cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-Nuts, screwed for iron pipe and fixed all as specified and directed. |
| 56 | S&F in repairs CP angle valve 15mm bore cast copper alloy fancy type, chromium plated with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed. |
| 57 | S&F in repairs Wall mixer 3-in-1 way telephpnic/Non telephonic long sank 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 58 | S&F in repairs EWC seat cover with fittings (hinges) complete all as specified and directed. |
| 59 | S&F in repairs sink cock swan neck 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed for iron pipe and fixed complete all as specified and directed. |
| 60 | S&F in repairs centre hole basin mixer 15mm bore, cast copper alloy, chromium plated, screwed for iron pipe and fixed complete all as specified and directed. |
| 61 | S&F in repairs 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 62 | S&F in repairs PVC connection fibre reinforced 450/600mm long with brass check nuts and PVC washers at both ends as specified and directed. |
| 63 | S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 64 | S&F in repairs PVC flexible waste pipe 32 mm dia complete all as specified and directed |
| 65 | S&F in repairs PVC Rigid waste pipe 32 mm dia and 600mm long with coupling complete all as specified and directed |
| 66 | S&F in repairs for cast copper alloy chromium plated overhead rain shower square 150mm x 150mm (6\\" x 6\\") with chromium plated sqaure arm rod 450mm long complete all as specified and directed. |
| 67 | S&F in repairs of brass adjustable rod for centre hole WHB mixer including round washers and packing as per site requirement complete all as specified and directed |
| 68 | S&F in repairs brass adjustable legs for wall mixer incl washers and packing as per site requriment complete all as specified and directed |
| 69 | S&F in repairs 15/20mm CP/brass spindle for Bib cock, stop cock, pillar tap, angle wall, wall mixer etc half or full turn of any description complete all as specified. |
| 70 | S&F in repairs water tank cover made of 1mm thick GI sheet as per sample kept in office of AGE B/R-II and fixed with gypsum screw for capacity of water tank n. exc 1000 ltrs all as specified and directed. |
| 71 | S&F in repairs chrominum plated brass jet spray of 15mm bore sutible for fixing in EWC complete all as specified and directed |
| 72 | S&F in repairs Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 73 | S&F in repairs acrylic bathroom corner of size 12\\"x12\\" fixed to to plugs with chromium plated brass screws complete all as specified and directed. |
| 74 | S&F in repairs stainless steel soap dish, overall size 120mm x 90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 75 | S&F in repairs SS grating (with/ without hole) of size 100/125mm complete all as spd and directed |
| 76 | S&F in repairs 40 mm dia brass polished, bright finished cup board knobs fixed with nut screws and washer complete all as specified and directed. |
| 77 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 78 | S&F in repairs looking mirror of size 600 mm x 600 mm of selected quality glass fixing in PVC frame fixed with rawl plugs & screws complete all as specified and directed. |
| 79 | S&F in repairs looking mirror frameless of size 600 mm x 600 mm of selected quality glass fixed with rawl plugs & screws complete all as specified and directed. |
| 80 | S&F in repairs 16/18/20 inches long SS sliding channel for drawer complete all as specified and directed. |
| 81 | S&F in repairs stainless steel 2D soft close auto cabinet hinge complete all as specified and directed. |
| 82 | S&F in repairs 100mm stainless steel handles designer type complete all as specified and directed. |
| 83 | S&F in repairs Magnetic catches of 50/30mm size for cupboard shutters etc complete all as specified and directed. |
| 84 | S&F in repairs Brass Locks 2 levers, cupboard, grade I, size 50mm complete all as specified and directed. |
| 85 | S&F in repair mild steel drapery rod of size 20mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plugs and screws on walls/beam complete all as specifed and directed. |
| 86 | S&F in repairs stainless steel drapery rod of size 20mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of stainless steel brackets fixed at both ends with PVC rawl plugs and screws on walls/beam complete all as specifed and directed. |
| 87 | S&F in repairs for plate rack of stainless steel 1 mm thick for kitchen or labotary over all size 720 x 600 x 230 mm fixed with plugs and washers on wall complete all as specified and directed. |
| 88 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mmx 330mmx 200mm complete all as specified and directed. |
| 89 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 456mm x456mm bowl size 400mmx 400mmx 200mm complete all as specified and directed. |
| 90 | S&F in repairs CP kitchen sink waste coupling of size 100mm complete all as specified and directed |
| 91 | S&F in repairs CP kitchen sink waste coupling of size 75mm complete all as specified and directed |
| 92 | Taking down cement plaster or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed . |
| 93 | M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 94 | M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra complete all as specified and directed. |
| 95 | M&L for 5mm thick rendering on concrete surface of ceiling with cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed. |
| 96 | M&L for including preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 97 | M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper over a coat of chalk whiting, on plastered surfaces, prepara-tory to distempering complete all as specified and as directed. |
| 98 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint (weather proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 99 | M&L for for complete removal of existing treatment of walls and applying Two or more coats of 100% Premium acrylic emulsion paint (weather proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of 1mm thick wall care putty exterior grade complete all as specified and directed. |
| 100 | M&L for preparation of old plastered surfaces of walls/ceiling and applying two coats of distemper oil emulsion complete all as specified and directed. |
| 101 | M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over 1mm thick wall care putty interior grade complete all as specified and as directed. |
| 102 | M&L for preparing surfaces plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed. |
| 103 | M&L for preparing surfaces plastered or unplastered old decorated surfaces of ceiling and applying two coats of white wash on ceiling complete all as specified and directed. |
| 104 | M&L for prepration of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel complete all as specified and directed. |
| 105 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 106 | M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed. |
| 107 | S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium red & high density plastic ball screwed for iron pipe(minimum weight 20mm-210gms) complete all as specified and directed |
| 108 | S&F in repairs 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium red & high density plastic ball screwed for iron pipe (Minimum weight 15mm-142gms) complete all as specified and directed |
| 109 | S&F in repair door closer hydraulically aluminium (extruded section body) designation No 3, universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kgcomplete all as specified and directed |
| 110 | S&F in repairs 18/19mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber frame work® complete all as specified and directed |
| 111 | M&L 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed, worught, framed rebated on the solid, rounded of chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 112 | Dismantling of unframed timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section etc complete all as specified and directed. |
| 113 | S&F 2nd Class soft wood plain fillets square rectangular or triangular in section clean sawn fixed with nails Sectional area exc 13 but not exc 25 sqcm complete all as specified and directed. |
| 114 | S&F 2nd class soft wood plain fillets exc 3 Sqcm n exc 6 Sqcm square, rectangular or triangular in section clean sawn secured with nails or brads complete all as specified and directed . |
| 115 | S&F in repairs 18/19mm thick Medium density fiber board interior grade with decorative face veeners on both faces and lipping as in repairs complete all as specified and directed. |
| 116 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded, jointed and pointed in any mortar complete all as specified and directed. |
| 117 | M&L 16mm to 18mm thick granite (of any type/any colour) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over 10mm thick rendering in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 118 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 119 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15mm thick screed bed in CM 1:6 including rubbing and polishing complete all as specified and directed. |
| 120 | Demolition of brick work / stone masonry built in cement mortar complete all as specified and directed. |
| 121 | M&L for brick work with Sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 122 | All as described item ser No 121 here-in-befoe but except bricks any types but curved on plan to any radius complete all as specified and directed. |
| 123 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified and directed. |
| 124 | S&F Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles laid over and including 15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed. |
| 125 | S&F coloured Glazed ceramic tiles in vertical surfaces (450x300x7mm) set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surfaces including 10mm thick back coat in CM 1:4 complete all as specified and directed. |
| 126 | S&F coloured Glazed ceramic tiles in vertical surfaces (600x300x7mm) set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surfaces including 10mm thick back coat in CM 1:4 complete all as specified and directed. |
| 127 | M&L Non-skid light shade ceramic tiles 7 to 8mm thick (square/ rectangular) scracth resistant, joint free polished area of each tile exc. 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete as specified and directed. |
| 128 | All as per item above but as in skirting over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 129 | M&L for Vitrified tiles 10mm thick (square/ rectangular) (Light shade) (Double charge) joint free area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete as specified and directed. |
| 130 | All as per item above but as in skirting over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 131 | Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed. |
| 132 | M&L for 75 mm thick PCC 1:3:6 Type C-2 (40mm graded aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed |
| 133 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paverblock of M-35 grade with approved colour (Glossy finish), design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed. |
| 134 | M&L for precast chequered cement concrete tiles of size 300x300x25mm thick, with grey cement and pigment, laid in floors with grey cement and joints filled with grey cement and pigment to match colour of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. |
| 135 | Dismantling unframed work timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed. |
| 136 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; Purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates of Fe-410-W(Gde-E-250 quality-A) (framed)etc,complete all as specified and directed |
| 137 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 138 | S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet(AZ-150) 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, fixed with self tapping screws complete all as specified and directed. |
| 139 | S&F Pre-painted galvalume aluminium zink coating GI based Plain steel sheet (AZ-150) 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, Ridge and eaves board, fixed with self tapping screws as in specified complete all as specified and directed. |
| 140 | Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 141 | Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476(part4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of Hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120grams per sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to form grid module of size 600x600mm suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x85x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and complete all as specified and directed. |
| 142 | M&L for PCC 1:3:6, Type C–1, using 20 mm graded stone aggregate as in coping including use and waste of form work and finishing the exposed faces of concrete even and smooth without using extra cement complete all as specified and as directed. |
| 143 | S&F in repair GI Tank nipple of 20mm/15mm bore 150mm long suitable for PVC storage tank of capacity upto 1000 litre complete all as specified and directed. |
| 144 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 145 | S&F in repairs rolled mild steel plate girder or single stanchions built of one beam or channel section with flange plate, caps, bases, spices, angle bracket, cleats and other connection Fe-290 (Gde 165) as specified to be prepared for hanging or sliding with and including either hooks or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and handing also fastening and fixing complete all as specified and directed. |
| 146 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed |
| 147 | S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed. |
| 148 | S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed. |
| 149 | S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 150 | S&F 110 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed. |
| 151 | S&F 75 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed. |
| 152 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 153 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 154 | Demolition of cement concrete (Unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 155 | M&L for cement concrete (1:5:10) type E2 (40mm graded aggregate) as in in foundations, filling and mass concrete complete all as specified and directed. |
| 156 | M&L for Water proofing treatment to sunken floors of kitchen, toilets, bath and WC's etc shall be as under :- (i) Application of two component acrylic modified cementitious coating. (ii) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treaments and old coatings. Concrete subtrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coatings and achieve a gripping profile that is clean , dry and free from laitance and any other form of surface contamination. (iii) Chipping out any visible cracks in \\"V-Groove\\" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 Putty/Dr. Fixit 302 SBR latex/Perma latex SBR/ FOSROC Nitobond SBR Latex/Asian Paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vaccum pressure if required. (iv) Dampen all surfaces immediatley ahead of application of Acrylic modified cementitious coating of Sika Top Seal-107/Brush Bond Fosroc/Dr. Fixit/STP/CICO. (v) Whilst the surface is still damp from saturation(S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal -107/Brush Bond Fosroc/Dr. Fixit/STP/CICO of viscosity as per manufacturer's instructions. (vi) Apply Glass Fabric sheet of Sika Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. (vii) Once touch dry, applied second coat of Acrylic modified cementitious coating of Sika Top Seal-107/Brush bond Fosroc/Dr. Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area. (viii) Second coat shall be applied after 6-8 hrs of application of previous coat and in the direction right angle to the previous coat. Please Enable Macros to View BoQ information |
