|
| 1 | Supply, laying, jointing and testing 100mm dia Ductile iron pipe laid in trenches, with spigot and socket ends suitable for push on rubber joint centrifugally cast class \\"K7\\" conforming to IS-8329-2000, inner side cement mortar lining with portland cement and outer side Metallic Zinc coating with a finishing layer of Black bitumen coating on external surfaces and including push on rubber gasket (EPDM) ring as per IS:5382 & all fittings complete all as specified and directed. |
| 2 | Supply and fixing 80-150mm dia Ductile iron fittings of Class \\"K-12\\" suitable for push on jointing as per IS:9523/2000 with inside cement mortar lining and outside Zinc coating with finishing layer of black bitumen, complete all as specified and directed. |
| 3 | Supply, laying, connection and testing, 50mm outer dia 3- layer PP-R Polypropylene random copo-lymer) pipes SDR 7.4 & PN16 stablised and antimi-crobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed. |
| 4 | Supply, laying, connection and testing, 25mm outer dia 3- layer PP-R Polypropylene random copo-lymer) pipes SDR 7.4 & PN16 stablised and antimi-crobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed. |
| 5 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed. |
| 7 | Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 8 | S & F 25 mm outer dia, PP-R Gate valves (brass insert) with iron wheel head, screwed both ends, ISI marked fixed to PP-R pipes as per requirement of the site complete all as specified and directed. |
| 9 | S & F 100mm bore, cast iron sluice valve, non-rising stem type, both end flanged, class PN 1.6 conforming to IS -14846-2000 with iron wheel head and brass spindle including necessary jointing materials like nuts, bolt, washer & rubber/fiber board gasket complete all as specified and directed |
| 10 | S & F 100 mm bore, Cast iron Non-return (reflux) valve, flange type with by-pass arrangement suitable for 100 mm dia water mains conforming to IS-5312 Part-I class PN 1.6 complete all as specified and directed. |
| 11 | M & L for construction of brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal dimension) with one brick thick wall in CM 1:4 on 100mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundation, 15mm thick rendering in cement mortar (1:4) internally, externally up to 15cm below GL, providing valve pit cover made out of 3mm thick MS sheet duly welded with provision of hinges, handle and locking arrangement including 50 x 50 x 6mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC block 1:2:4 type B-1 (20mm graded aggregate) of size 230 X 200 X 100mm, applying two coats of anti-corrosive paint over a coat of red oxide, zinc chrome primer after preparation of steel & iron surfaces including necessary excavation & earth work in soft/loose soil, complete as specified and directed all as per relevant TD drawing. (Note : Drawing not attached with the tender document. However, the same can be seen in GE/AGE E/M office during working hours) |
| 12 | S & F 100 mm dia, Cast iron \\"Y\\" type strainer for suction pipe both end flanged, class PN 1.6 complete all as specified and directed. |
| 13 | Supply, fixing, commissioning and testing of Monoblock Pump Set suitable for 415 Volt, 3 Phase of capacity 10 HP and inclusive of manufacturer fabricated MS base frame and PCC base foundation, complete all as specified and directed |
| 14 | Supply only PVC insulated, sheathed, flat stranded copper conductor of 6 Sqmm, 3 core, 1100 Volts Grade conforming to IS:694 water proof submersible cable complete all as specified and directed. Please Enable Macros to View BoQ information |
| 15 | Supply only PVC insulated, sheathed, flat stranded copper conductor of 6 Sqmm, 3 core, 1100 Volts Grade conforming to IS:694 water proof submersible cable complete all as specified and directed. Please Enable Macros to View BoQ information |
