|
| 1 | M & L for rendering 15mm thick cement plaster in CM (1:4) on brick work or concrete surfaces finished even and fair without using extra cement including taking down cement plaster in any mortar and removing the debries out side MoD land, complete all as specified and directed. |
| 2 | M&L for applying Two or more coats of Exterial quality Appex ultima paint on new surfaces of plastered surface/Concrete surface of wall complete all as specified and directed including 1 to 2mm thick wall care puty as a leveling course, complete all as specified and directed. |
| 3 | M&L for preparing newly plastered surfaces of external Walls and applying two Coats of Cement Base Paint over a coat of primer, complete all as as specified and directed. |
| 4 | M&L Preparing old painted surfaces of walls by washing rubbing down and stopping and applying one coat of cement base paint white or tinted, complete all as specified directed. |
| 5 | Excavation in trenches in hard/dense soil,n exc 1.5m wide and n exc 1.5m in depth ;for foundation etc.or for shafts well cesspit,maholes, pier holes etc.n exc 10 sqm on plan and n exc 1.50m in depth, complete all as specified and as directed |
| 6 | M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in foudnation, subbase filling and mass concrete, complete all as specified and directed. |
| 7 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6, complete all as specified and directed. |
| 8 | Excavating in post holes each n.exc 0.5 cum getting out and removing surplus soil to a distance n.exc 50 m and making good surface, complete all as specified and directed. |
| 9 | M & L for plain cement concrete ( 1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in post/strut foundation, complete all as specified and directed. |
| 10 | Dismantling wrought iron or mild steel work of any description, complete all as specified and directed. |
| 11 | M&L for mild steel work conforming to Fe-410-0 of Fe-310-0 Grade for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes natching for barbed wire and fixing of nuts and volts including fillet on back side of fencing post and all necessary drilling work, complete and all as specified and directed. |
| 12 | S&F 2mm thick fibre glass reinforced translucent plain/corrugated sheet as per site requirement , side lap fixed with \\"L\\" type or \\"J\\" type , cranked hook and washer or with self tapping screws in wall, fence etc complete all as specified and directed including dismantling of old sheets, complete all as specified and directed. |
| 13 | Supply only chain link MS galvanisd fencing, any size or type, complete all as specified and directed. Note :Actual weight of the fencing shall be ascertained by board of officers to be convened by GE. |
| 14 | Fixing only Chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 15 | S & F flat iron of size as directed as in fixing clamps or support to chain link fencing, stifners etc fixed with nut and bolts including making necessry holes, complete all as specified and directed. |
| 16 | M & L Mild steel round bars 10 mm dia horizontally woven in chain link fencing, complete all as specified and directed. |
| 17 | Mild steel screw bolts (machine made) 5 to 10mm dia of shank with hexagonal or square heads at one end and screwed the other, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long, complete all as specified and directed |
| 18 | M&L for framed works such as grills, gratings, gates , railing etc with ends of bars shouldered or riveted or forged into spikes: framed guard bars, barred iron doors, ladders, framed balusters , walk ways railings framed work of water tanks and similar works conforming to Fe 290 Gde-E165, complete all as specified and directed |
| 19 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer, complete all as specified and directed. |
| 20 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer, complete all as specified and directed. |
| 21 | M&L for Preparing of old treated surfaces of Kerb stone ,cornices, pillasters in path edging, etc by brooming down with steel wire brushing scrapping down smoke soot, moulds Moss and efflorescent salts and treating oily and greasy spots etc and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 22 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to be more than 5 mm), including making drainage opening wherever required, complete all as specified and directed including demolition of old kerb stone disturbed and detoriated and removal of same out side MoD land, complete all as specified and directed. |
| 23 | M&L for Preparing new surfaces of cornices, pillasters, kerb stone and applying two coat of synthetic enamel paint, complete all as specified and directed. |
| 24 | M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in foudnation filling and mass concrete and including dismantlig the old concrete, complete all as specified and directed. |
| 25 | M&L for walling of random rubble , uncoursed well bonded, bedded and solidly hearted built in CM (1:4) and including demolition of old disturbed stone, complete all as specified and directed. |
| 26 | M&L keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:3, complete all as specified and directed. |
| 27 | Supply only PVC (SWR) conduit pipes 100mm dia in any length with rubble ring joints laid in trenches or in floor or as in weep holes, complete all as specified and directed. |
| 28 | M&L for rubber moulded chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigments over 20mm thick screed bed or bedding layer in cement mortor (1:6) set , jointed and pointed in neat cement slurry and including dismantling of old broken tiles etc and removing out side MoD land, complete all as specified and directed. |
| 29 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 30 | M & L for plain cement concrete 1:4:8 Type D-2(using 40mm graded crushed stone aggregate) 75mm thick as in sub base over rammed earth, complete all as specified and directed. |
| 31 | M&L for rubber moulded Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over and including 50mm thick sand cushioning, complete all as specified and directed. |
| 32 | M&L for palin cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in copings , filleting, edging and the likes, complete all as specified and directed. |
| 33 | M&L wrought Second class hard-wood work unframed incl dismantling timber scantlings of any desc & in any position and fixing with Plain cement concrete type C2 (1:3:6) using 40mm aggregate as in post holes minimum size of holes 300x300x450 including digging the holes for fixing the wood post as in Jafari, Jangala , Fencing etc., complete all as specified and directed |
| 34 | S&F in repair wooden Jalli/Jangala as per pattern at site vertical spacing of 75mm Centre to Centre including top -midle and bottom battens of 2nd class clean swan hard wood fillets having cross sectional areas exceeding 15 sq cm but not exc 25 sq cm and painting with two coat of synthetic enamel paint over a coat of pink primer and inclduing fixing hold fast etc as per site requirement, complete all as specified and directed |
| 35 | S&F 35x10mm laths (fixed straight or diagonally) of 2nd class soft wood clean sawn two way trellies work with 50mm spaces in clear, including 75mmx50mm fillet (notched to take ends of leths) all around and fixed and painting with two coat of synthetic enamel paint and including Dismantling of trellies work (jafri, Jungla),complete all as specified and as directed. |
| 36 | S&F reinforced pre cast cement concrete Louvres/Jallies 25mm thick type B0 (1:2:4) using 12.5mm graded crushed stone aggregate) fixed and set in CM 1:4 complete all as specified and directed including dismantling the old Jallies in boundry wall and removing the debries out side MoD land, complete all as specified and directed |
| 37 | Notes :-An amount of Rs 18150.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
