|
| 1 | Electrification |
| 2 | OD539260/2025-2026:Supply, Conveyance, Installation, Testing & Commissioning of 58.5KVA , 3ph,415V, 0.8 Power factor, 50Hz, 1500RPM, Liquid Cooled, Salient type, DG Sets, as per latest CPCB IV standard with standard accessories with AMF Control Panel & standard accessories, Battery and other accessories with approved as a complete sets incluiding first fill of lub oil ,Engine Coolent , all other std accessories incluiding Acoustic Enclosure with Noice level less than 75 dB as required Approved Brand : Ashok Leyland , KOEL , Cummins |
| 3 | OD539271/2025-2026:Exhaust Pipe with MS Class B pipe 125mm , Heavy duty bend , Flexible expansion Connector, MS support Structure incluiding 2 coat heat resistance paint |
| 4 | OD539266/2025-2026:F a b r i c a t i o n ,s u p p l y , c o n v e y a n c e , i n s t a l l a t i o n , t e s t i n g and commissioning of floor or wall mounting , dust and Vermin proof, Front & Real Operated, Cubicle type MV panel board using 1.6mm CRCA sheet Size 1500x1750x500mm comprising of the following components/devices : (1) 160A 4P 36kA MCCB (1 No), 63A 4P 25kA MCCB (1 No),63A TPN 25kA MCCB (5 Nos), 63A 4P ATS Motorised (1 No), (6) 63A 4P MTS (1 No), (7) KSEB CT Chamber (1No) , KSEB EM Chamber (1 No) , KSEB 63A HRC Cut-out Chamber (1No.) , Metering & Relay Comparment for Indications , Relays, Multifunction Meter , Max Demand, (2 nos) , One Compartment for of CT operated Energy Meter , busbar chambers,Cable Chambers, hinged doors o r a l l s w i t c h gear compartments, 25x3mm earthing Busbars on both sides of Top & bottom. |
| 5 | 90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. |
| 6 | 90.14.3.3:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardSupply and providing 'U' section PVC beeding in the panel board |
| 7 | 90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC) |
| 8 | 90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required. |
| 9 | 90.14.7:Supply and providing copper earth bus in the panel board |
| 10 | OD539258/2025-2026:S u p p l y conveyance and fixing the following types & current r a t e d c o n t r o l g e a r s switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing p a n e l a s s e m b l y a s required .Range 16-100A, 25 kA, (I c s = 1 0 0 % I c u ) , 3P , current limiting type MCCB with Thermal & Magnetic release , Adjustable O/L settings Range (80-100%), |
| 11 | OD539263/2025-2026:S u p p l y conveyance and fixing the following types & current r a t e d c o n t r o l g e a r s switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing p a n e l a s s e m b l y a s required .Range 16-100A, 25 kA, (I c s = 1 0 0 % I c u ) , 4 p o l e , current limiting type MCCB with Thermal & Magnetic release , Adjustable O/L settings Range (80-100%) |
| 12 | OD539265/2025-2026:100A Bakelite type Neutal Link |
| 13 | 90.14.11.13:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A |
| 14 | 90.14.11.12:MCCB AccessoriesSupply and fixing shunt release for all voltage range up to 630A. |
| 15 | OD539272/2025-2026:63A 4P Motorised Auto Transfer switch (ATS)with Controller |
| 16 | OD539269/2025-2026:63A 4P Manual Transfer switch (MTS)with Operating Handle , Auxiliary contact |
| 17 | 90.12.7.29:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm with factory made clamp |
| 18 | 90.12.7.33:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 150 sq mm |
| 19 | 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 20 | OD539268/2025-2026:Supply and providing of ABC type fire extinguisher 6kg capacity consisting of M.S cylindrical body,squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30cm long high pressure discharge hose, nozzle etc. |
| 21 | 2.10.4:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Triple pole |
| 22 | 90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size |
| 23 | 90.16.2.2:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.20 mm dia. G.I pipe ( medium class) |
| 24 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 25 | 90.16.1.5:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG) |
| 26 | 90.16.1.6:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required6.00 mm copper conductor (4 SWG) |
| 27 | OD539264/2025-2026: Supply and fixing 63 A, 415V,2 way Neutral l i n k |
| 28 | OD539261/2025-2026:Supply & installation of dust and vermin proof, 3 Phase Meter Board (GS-MB- 6535 of M/s Sintex make) and to fix KSEB meters, fuse units,CT etc as required includingfixing it on wall, making good the damages colour washing etc. as required. |
| 29 | 1.10.1:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group A |
| 30 | 1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 31 | 90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture |
| 32 | OD539262/2025-2026:Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, epoxy powder coated, heat resistant prismatic glass cover with 8 / 9 / 11 W LED to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required.<br> |
| 33 | 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply |
| 34 | 1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 35 | 90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. |
| 36 | OD539267/2025-2026:Supply and installation of wall Fan with 3 speed energy saving motor .Sweep (mm):400mmPower Input (watts) : 125W , speed : 2100 RPM, Air delivery :105 CMM .Number of blade 3 |
| 37 | 90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. |
| 38 | OD539259/2025-2026:Supply Installation , testing and commissioning of 450 mm ,1400 rpm, 370W lightduty exhaust fan in metal frame working on 230 V A/C |
| 39 | 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm |
| 40 | 1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm |
| 41 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 42 | 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 43 | 90.11.1.10:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43) |
| 44 | 2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 45 | 2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415volts, residual current circuit breaker (RCCB), having a sensitivity current 30milli Amperes in the existing MCB DB complete with connections, testing andcommissioning etc. as required.63 amps |
| 46 | 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Single pole |
| 47 | 90.12.2.12:Supply and laying of one number additional PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground in the same trench in one tier horizontal formation including widening the trench by 20 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil)3 core 4 sq mm |
| 48 | 90.12.7.12:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 4 sq mm with factory made clamp |
| 49 | 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) |
| 50 | 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) |
| 51 | 90.2.1.6:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points |
| 52 | 1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet |
| 53 | 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch |
| 54 | 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) |
| 55 | 90.16.3.10:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 6 mm copper strip |
| 56 | OD539270/2025-2026:LED SIGN BOARD : Design , Fabrication , Assembly, Installation & commissioning of LED SIGNAGE : Overall Size : 16 Feet (W) x 3 feet (H)x1feet (D) , Frame : GI One-inch Heavy duty Square Pipe with Epoxy Coated Primer by dipping into Epoxy primer in order to cover inner and our of the pipe and Riveting the Blue color Aluminum Composite Panel (ACP ) base white color Acrylic projection type Letters(English & Malayalam) fixing with LED Light in the base. covering the end of board side with Aluminum bleeding. Minimum 3 Years Warranty required for materials including LED strip Please Enable Macros to View BoQ information |
