|
| 1 | Cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m aboveground level and removal of rubbish up to distance of 50m out side the periphery of the area cleared |
| 2 | Item code morth 301 Excavtion in soil using hydraulics excavator and tippers with disposal upto 1000 meters Excavation for road work in soil with hydraulics excavator including cutting and loading in tippers, trimming bottom and side slopes in accordance with requiremements of lines , grades and cross section and transportation to the embankment location within all lifts and lead upto 1000 meters |
| 3 | Providing and laying in position cement concrete with 4 cm gauge approved stone ballast c sand and cement in pro of 8:4:1 including supply of all material labour tools and plants etc req for proper comp of work |
| 4 | M-150 brick work in 1:4 cement & fine sand 1.25f.M mortar in foundation and plinth including supply of all materials labour complection of the work compiation of work 1:4 |
| 5 | M-150 brick work in 1:4 cement & fine sand 1.25f.M mortar Above plinth including supply of all materials labour complection of the work compiation of work 1:4 |
| 6 | Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 4:2:1 including supply of all material labour tools and plants etc required for proper completion of the work. Same as above item no.279 but with 2cm gauge stone grit in stend of 4cm gauge stone lallast. UP PWD SOR-2020/DAR-18/279a |
| 7 | 12mm Cement Plaster of mix 1:6 (1 cement : 6 coarse sand) |
| 8 | Dry Brick on Edge flooring in required pattern wirh bricks of class designation 150 on bed of earth including filling compressed woth M-150 Brick |
| 9 | Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/ 10 sqm) New work |
| 10 | Providing corrugated G.S. roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlaping of sheets complete (Up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins whatever required |
| 11 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note:- Cement content considered in this item is @330 kg/cum.Excess/less cement used as per design mix is payable/recoverableAll work up to Plinth level. UPPWD/SOR/DAR/5.33.1 |
| 12 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note:- Cement content considered in this item is @330 kg/cum.Excess/less cement used as per design mix is payable/recoverableAll work Above Plinth upto V Level |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for: foundation, footing, bases of columns, etc for mass concrete |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beam, plinth beams, girders, bressumers and cantilevers |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for: Column, Pillers, piers, Abutments, Posts and struts |
| 16 | Thermo-Mechanically Treated Bars. Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete |
| 17 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DAR/10.25.2/Based on UPPWD/SOR-2020)) |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 19 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (Based on SOR UP PWD 2020) |
| 20 | Providing and laving 60 mm thick factory made cement concrete Interlocking paver block(ISI Marked) made by block making machine with strong vibratory compaction of approved size design, shape, laid in required color and pattern over and including average 50 mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per direction of Engineer -in - charge with conforming (UP PWD SOR 2020) (New SOR Based DAR 16.68) |
| 21 | Supply and fixing of Indiamark Handpump including making chabutra of dia 2mtr and 45mtr lowering (depth) and pvc assembling, blinding pipe strainer and 63mm/110mm dia PVC pipe etc (Pressure 6.0kg/cmsqr) including all labour & material and T&P complete as required as per direction of engineer-in-charge |
| 22 | Supply of good earth work banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonne and dressing up in embankments for roads flood banks marginal banks and guide banks or filling up ground depressions all lead as per (a.r.) for all kind of soils |
| 23 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 24 | R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately). Please Enable Macros to View BoQ information |
