|
| 1 | Item code morth 301 Excavtion in soil using hydraulics excavator and tippers with disposal upto 1000 meters Excavation for road work in soil with hydraulics excavator including cutting and loading in tippers, trimming bottom and side slopes in accordance with requiremements of lines , grades and cross section and transportation to the embankment location within all lifts and lead upto 1000 meters |
| 2 | Providing and laying in position cement concrete with 4 cm gauge approved stone ballast c sand and cement in pro of 8:4:1 including supply of all material labour tools and plants etc req for proper comp of work |
| 3 | centering & shuterring including strutting propping etc & removal of form for: Foundation , footing bases of colums etc for mass concrete |
| 4 | centering & shuterring including strutting propping etc & removal of form for: Lintels, beams, plinth beams, griders, bressumer sand cantiliver |
| 5 | centering & shuterring including strutting propping etc & removal of form for: Column, Pillers, Piers, Abutments, Posts and struts |
| 6 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) DSR-18/5.1.2 |
| 7 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) DSR-18/5.1.2 all work above plinth upto V level |
| 8 | Reinforcement for RCC work including straghtening cutting bending placing in position and binding all complete up to plinth |
| 9 | M-150 brick work in 1:4 cement & fine sand 1.25f.M mortar in foundation and plinth including supply of all materials labour complection of the work compiation of work 1:4 |
| 10 | M-150 brick work in 1:4 cement & fine sand 1.25f.M mortar Above plinth including supply of all materials labour complection of the work compiation of work 1:4 |
| 11 | 12mm Cement Plaster of mix 1:6 (1 cement : 6 coarse sand) |
| 12 | 15mm Cement Plaster of mix 1:6 (1 cement : 6 coarse sand) |
| 13 | Finishing walls with water proofing cement paint of required shade:New work Two or more coats applied 3.84 kg/bsqm |
| 14 | Providing precast cement concrete JaIl 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. |
| 15 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 16 | Painting with synthetic enemel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 17 | Dry Brick on Edge flooring in required pattern wirh bricks of class designation 150 on bed of earth including filling compressed woth M-150 Brick |
| 18 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (Based on SOR UP PWD 2020) |
| 19 | Providing and laving 60 mm thick factory made cement concrete Interlocking paver block(ISI Marked) made by block making machine with strong vibratory compaction of approved size design, shape, laid in required color and pattern over and including average 50 mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per direction of Engineer -in - charge with conforming (UP PWD SOR 2020) (New SOR Based DAR 16.68) |
| 20 | Supply of good earth work banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonne and dressing up in embankments for roads flood banks marginal banks and guide banks or filling up ground depressions all lead as per (a.r.) for all kind of soils |
| 21 | Demolishing brick work manually/ by Mechanical means including disposal od material within 50 meters Demolishing Cement Concrete: Please Enable Macros to View BoQ information |
