|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil (DAR 2018-2.6.1)Based on UPPWD SOR/2020 |
| 2 | Supplying and laying of good earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions |
| 3 | Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 97% of the maximum dry density (proctor density). DAR-18/16.2/P-240 |
| 4 | Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all material, Labour, Tools&plants etc required for proper completion of the work. |
| 5 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum.Excess/less cement used as per design mix is payable/recoverable All works upto plinth level. (DAR/5.33.1/Based on UPPWD/SOR-2020) |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete. (DAR/5.9.1/Based on UPPWD/SOR-2020)) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers (DAR 2018-5.9.6)Based on UPPWD SOR/2020 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for all heights, Suspended floors, roofs, landings, balconies and access platform (DAR 2018-5.9.3)Based on UPPWD SOR/2020 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts (DAR 2018-5.9.6)Based on UPPWD SOR/2020 |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all Complete upto plinth level & above plinth level.(DAR 2018-5.22)Based on UPPWD SOR/2020Thermo Mechanically Treated bars of grade Fe-500D. (DAR 2018-5.22.6)Based on UPPWD SOR/2020 |
| 11 | Dry brick on edge flooring in required pattern with bricks of class designation 150 on a bed of joints with loose sand (with F.P.S. bricks) complete. (DAR 11.2/Based on UP PWD SOR 2020) |
| 12 | B/W with bricks of class 150 in foundation & plinth in CM 1:4 (Based on UP PWD SOR 2020) |
| 13 | 12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) BASED on UP PWD SOR 2020 |
| 14 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DAR/10.25.2/Based on UPPWD/SOR-2020) |
| 15 | Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work. (DAR/13.61.1/Based on UPPWD/SOR-2020) |
| 16 | Providing wallputty on new surface with approved quality material of berger/j.k. /Birla or similar make 2 coat |
| 17 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). (DAR/13.46.1/Based on UPPWD/SOR-2020) |
| 18 | Providing and laying 80 mm thick factory made cement concrete interlocking paver block(ISI Marked) made by block making machine with strong vibratory compaction of approved size design, shape, laid in required color and pattern over and including average 50 mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per direction of Engineer -in - charge with conforming (UP PWD SOR 2020) (New SOR Based IS: 15658 IRC: SP:63 Please Enable Macros to View BoQ information |
