|
| 1 | Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect |
| 2 | Up to 5.5 KW (7.5 HP) & head up to 120 mtr. |
| 3 | Up to 5.5 KW (7.5 HP) & head above 120 mtr. |
| 4 | 7.5 KW (10 HP) & head up to 120 mtr. |
| 5 | 7.5 KW (10 HP) & head above 120 mtr. |
| 6 | 9.3 KW (12.5 HP) & head up to 120 mtr. |
| 7 | 9.3 KW (12.5 HP) & head above 120 mtr. |
| 8 | 11 KW (15 HP) & head up to 120 mtr. |
| 9 | 11 KW (15 HP) & head above 120 mtr. |
| 10 | 13 KW (17.5 HP) & head up to 120 mtr. |
| 11 | 13 KW (17.5 HP) & head above 120 mtr. |
| 12 | 15 KW (20 HP) and above, head up to 120 mtr. |
| 13 | 15 KW (20 HP) and above, head above 120 mtr. |
| 14 | Supply & Fixing of electric controls feeder pannel comprising of suitable rating MCCB, fully automatic Star/Delta starter, overload relay, ampere meter with CTs, Volt meter, phase preventor, suitable starting capacitors, phase indicators, lighting arrangment etc complete suitable for three phase pump set. The pannel should have space for Energy meter (Supplied by DISCOM). All these equipments shall be housed by pannel box made out from 18 gauge MS sheet with powder coating. Pannel should be of minimum size 90X60X450mm with stand (made of angle iron of size 35X35X5mm) duly bolted/screwed with enclosure box having four legs, each leg lenght 18\\" and double door including inbuilt locking system. The legs should be embeded in M15 cement concrete platform. The size of CC plateform should be equal or bigger than the base size of pannel having height of atleast 200mm from ground level. The pannel should have opening of suitable size infront of space for energy meter with glass for meter reading. The operation of pannel should be suitable for on 440 Volts AC supply. |
| 15 | Above 5 HP and up to 10 HP |
| 16 | Above 10 HP and up to 15 HP |
| 17 | Above 15 HP and up to 20 HP |
| 18 | Above 20 HP and up to 30 HP |
| 19 | Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS:694:1990 or ammended upto date and conductor as per class 5 of IS:8130:1980 including making connections etc. |
| 20 | 3 core 4.0 Sq.mm |
| 21 | 3 core 6.0 Sq.mm |
| 22 | 3 core 10.0 Sq.mm |
| 23 | 3 core 16.0 Sq.mm |
| 24 | Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. |
| 25 | 10.0 Sq.mm, 4 core |
| 26 | 16.0 Sq.mm, 4 core |
| 27 | Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B\\" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. |
| 28 | 50 mm dia |
| 29 | Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set |
| 30 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2\\" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. |
| 31 | 125 mm dia |
| 32 | 150 mm dia |
| 33 | 200 mm dia |
| 34 | Providing & Fixing of double flanged, CI body, ISI marked NRV of approved make of following sizes |
| 35 | 65 mm dia |
| 36 | 80 mm dia |
| 37 | Providing, installation, testing and commissioning of submersible Monoblock pump set conforming to IS 8034 and 2 pole motor operating at synchronised speed of speed 3000 RPM, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz AC and with water lubricated bearing to accept entire hydraulic thrust. Supply, with cable guard, thrust carbon/fibre bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump and minimum 6 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD. |
| 38 | 5.5 KW (7.5 HP) |
| 39 | 7.5 KW (10 HP) |
| 40 | 9.3 KW (12.5 HP) |
| 41 | Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 , 2 pole motor operating at synchronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.Centrifugal Monoblock Pump set (Single Stage) |
| 42 | 5.5 KW (7.5 HP) |
| 43 | 7.5 KW (10 HP) |
| 44 | 9.3 KW (12.5 HP) |
| 45 | 11.0 KW (15 HP) |
| 46 | 15.0 KW (20.0 HP) |
| 47 | 18.5 KW (25.0 HP) |
| 48 | Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 , 2 pole motor operating at synchronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.Centrifugal Monoblock Pump set (Double Stage) |
| 49 | 5.5 KW (7.5 HP) |
| 50 | 7.5 KW (10.0 HP) |
| 51 | 9.3 KW (12.5 HP) |
| 52 | 11.0 KW (15.0 HP) |
| 53 | 15.0 KW (20.0 HP) |
| 54 | Providing, installation, testing and commissioning of Submerged Centrifugal Pump sets with motor 4 pole synchronised speed of 1500 rpm ( water immersed, dry air filled, class \\"F\\" insulated TEWC motor integrally mounted on volute casing pump sets for drinking water ) 3 phase, +/- 3%, 415 volt +/- 10%, along with suitable foundation/ installation device and with 10 mtr cable, material of construction of impeller SS, casing (volute) CI, wearing ring SS, etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD. |
| 55 | 15 KW |
| 56 | 18.5 KW |
| 57 | 22 KW |
| 58 | 30 KW |
| 59 | 37 KW Please Enable Macros to View BoQ information |
