|
| 1 | Supply with Transportation at site of polygonal shape 12.5mtrs. High mast pole (BPP/Utkarsh)with its accessories. Mast shaft shall be in two section, made from H.T. Steel of grade BSEN 10025,5355JO hot dip galvanised and suitable for wind speed 180km/hr as per IS 875. It shall also included acc. for hight mast including head frame, two continues steel wire Rope mm (Grade AISI 316), trailing cable, double drum winch galvanised lantern carrage arrangement suitable for 6/8 nos. luminaries symmetrically and its cotrol gear box, Motot, Manual operatinghandle, Motor mounting plate, L-Staper, Lighting, arraster, Junction box. Including Foundation acc.The mast shall have an intigral pwer tools installed inside the base compartment for its operation. Including Luminaries wiring wire/ cable etcmaterials for power supply from feeder piller to Luminaries included in the mast supply price. |
| 2 | Erection of High Mast (12.0m) on RCC foundation with cement concrete considering the actual SBC of soil with the suitable modern Engg. tools and plants, wiring ofluminaries with all wiring materials like PVC insulated flexible cable of suitable cupper conductor along with the construction of shallow foundation with the cement concrete as per site condition, as per drawing and design of the manufacturer of the mast. The soil test and submission of its report is within the scope of the work |
| 3 | Supplying & erection of LED aviation obstruction light 4 Lumainair (Bajaj 110731) |
| 4 | Sypplying and fixing double door M.S Feeder Piller box with near the High Mast Tower |
| 5 | Providing the fallowing component (switching acc.) in side the Feeder piller including internal wiring all. complete. for automatic, timely OFF/ON for oparating of (6 to 8 nos.) LED. lighting fitting.i) 32A 4 pole MCB isolater-1ii) 240V, cotractor-1 no.iii) Day dial Timer (GIC) -1 no.iv) By pass switch-1 no.v) out let Teminal -2 nos.vi) Starter for moter operation (Forward and Revers direction)-1no. |
| 6 | Supply of 200W, 230V, LED Flood Light fixture (C.G. make model LFLN-200-WW/60-M). Or equivalent of BAJAJ |
| 7 | Supplying and erection of Earthing station with 50mm dia, G.I.pipe 3.65mm thick, 3M long and 1 no. 4 SWG G.I. wire 4 M long, 13mm dia. 80mm long G.I. bolt double washers, nuts, S&F 15mm dia G.I.pipe protection, to be filled with bitumin, partlyunder ground and partly above ground level driven to an avarage depth3.65M below the ground level including excavation of soil. |
| 8 | Supplying 4 core 10 sqmm pvc insulated and scheathed aluminium conductor armoured cable |
| 9 | Laying of one no cable up to 35 sqmm in underground trench 460mmX760mm avarage depth with brick protection avarage 8 nos, brick per meter including filling up the spce between cable and bricks and shifted soil and leveling all complete. |
| 10 | Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc, 4 core 16 sqmm cable |
| 11 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: 4 core 16 sqmm cable |
| 12 | Supplying and fixing 32A, 450V TPN main switch on iron frame on wall and making connection. (HPL/ Standered make) |
| 13 | Sub Total |
| 14 | GST 18% |
| 15 | CESS 1% Please Enable Macros to View BoQ information |
