|
| 1 | Dismantling of fencing posts or struts (Wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground, complete all as specified and directed. |
| 2 | Dismantling fencing wire mesh any type, complete all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 4 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 5 | Dismantling of structural steel work including doors, gates but excluding framed truss etc, complete all as specified and directed. |
| 6 | Demolition of brick work or stone masonry built in cement mortar including all quoins arches pillars etc excl ashlar facing dressed stone work and pre-cast concrete articles, complete all as specified and directed. |
| 7 | M&L for brickwork class B (old size), straight or curved on plan exc 6m mean radius, built in CM (1:4), complete all as specified and directed. |
| 8 | All as per item No 7.00 here-in-before but except bricks. |
| 9 | M&L for cement concrete in foundation filling and mass concrete 1:4:8 (using 40mm graded stone aggregate) in foundation, complete all as specified and directed. |
| 10 | M&L for cement concrete in foundation filling ans mass concrete 1:3:6 (using 40mm graded stone aggregate) in foundation, complete all as specified and directed. |
| 11 | M&L for stone walling of squared rubble, regular uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed. |
| 12 | All as per item No 11.00 here-in-before but except stone. |
| 13 | M&L for boulder pitching, laid dry, hand packed tightly, complete all as specified and directed. |
| 14 | M&L for providing precast cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) in bonders (for stone walling) corbels, brackets, etc (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match, complete all as specified and directed. |
| 15 | Extra over stone walling for hammer dressing to face stone and dressing of face beds with maximum depression on face from straight edge held against the dressed surface on sand stone n.exc 40mm, complete all as specified and directed. |
| 16 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping including necessary formwork, complete all as specified and directed. |
| 17 | M&L for raised pointing to random or polygonal rubble, un coursed or brought up to courses in cm 1:4, complete all as specified and directed. |
| 18 | M&L for broken stone hand packing at back of wall over arches etc and raising (lowring) to the required level, complete all as specified and directed. |
| 19 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in as weep hole etc, complete all as specified and directed. |
| 20 | M&L for factory made Pre-cast cement concrete block masonry type C-1 (1:3:6) (using 20mm graded stone aggregate) with solid blocks set in CM 1:6, exc. 10 cm in width and setting in mortar, complete all as specified and directed. |
| 21 | M&L for excavating in post holes in any type of soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 22 | M&L for PCC 1:3:6 typeC1 (using 20mm graded stone aggregate) as in surface channels and drains including demolition, complete all as specified and directed. |
| 23 | M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc incl demolition, complete all as specified and directed. |
| 24 | Taking down cement plaster on brick wall including racking out joints, hacking for key, scrrubing down with water etc, complete all as specified and directed. |
| 25 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surface with and including finished even and smooth without using extra cement, complete all as specified and directed. |
| 26 | Taking down of RCC posts and rexfing in same or other location after minor repairs if any and PCC for foundation and exavation for post shall be paid seperately in respective item, complete all as specified and directed. |
| 27 | S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rail straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured), complete all as specified and directed. |
| 28 | S&F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rail straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured), complete all as specified and directed |
| 29 | Restraining, securing incl making good Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rail straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured), complete all as specified and directed. |
| 30 | M&L for RCC (Design mix M-25) (using 20mm graded stone aggregate) as in lintel, bands, and roof beam, complete all as specified and directed. |
| 31 | M&L for RCC (Design mix M-25) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 32 | M&L for RCC (Design mix M-25) (using 20mm graded stone aggregate) as in column, post, piers etc, complete all as specified and directed. |
| 33 | Formwork rough finished surface in flat to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter, complete all as specified and directed. |
| 34 | Formwork rough finished surface in flat to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed. |
| 35 | Formwork rough finished surface to edges of concrete flats, breaks in floors, opening in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide (Where RCC/PCC band in walls), complete all as specified and directed. |
| 36 | M&L for mild steel TMT bars(Fe-410 Gde E-250) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 37 | M&L for mild steel TMT bars(Fe-410 Gde E-250) 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 38 | S&F Mild steel work as Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, post and struts in fencing incl cutting top to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all neccessaery drilling, bolting or reveting and similar work Fe-290 Gde E-165, complete all as specified and directed. |
| 39 | Fixing only Mild steel work as hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; post and struts in fencing incl cutting top to shape as directed,drilling holes,notching for wire etc,flat iron fillets(for securing wire mesh etc) including all neccessaery drilling,bolting or reveting and similar work Fe-290 Gde E-165, complete all as specified and directed. |
| 40 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but not exc 10 CM long and diameter of neck 11 to 15 mm, complete all as specified and directed. |
| 41 | S&F chain link MS galvanised fencing any size or type, complete all as specified and directed. |
| 42 | S&F mild steel galvanised PVC coated chain link fencing, 3.15mm nominal dia of GI wire, 1.4mm thick PVC coating and average area of aperture 25 Sqcm with weight of chain link not less than 3.60 Kg/Sqm, complete all as specified and as directed. |
| 43 | S&F concertina coil 600mm to 900mm dia, 56 loops, 2.5mm core wire heavy galvanised (wire-275GMS& strip-200 GSM), tensile strength of wire 1400-1500 N/sqm, weight 10kg/ coil, streachable length 12m including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc after dismantling of old concertina coil of any type, complete all as specified and directed. |
| 44 | Supply only MS in flat, round or square bar in available length Fe-410-w Gde E-250, complete all as specified and directed. |
| 45 | Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 46 | Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 47 | Preparation of new steel surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 48 | Preparation of new plastered surfaces and applying two coats of cement base paint on surfaces of walls, complete all as specified and directed. |
| 49 | M&L for two coats of white wash including preparation of newly plastersd surface of wall, complete all as specified and directed. |
| 50 | M&L for one coat of white wash including preparation of old decorated surface of wall, complete all as specified and directed. |
| 51 | M&L for two coats of colour wash including preparation of newly plastersd surface of wall, complete all as specified and directed. |
| 52 | M&L for preparation of newly surface of walls and applying two coats exterior emulsion (weather coat) over one coat of primer in two or more colour pattern as approved by GE, complete all as specified and directed. |
| 53 | Complete removal of existing treatment of walls and applying two coats exterior emulsion (weather coat) over one coat of primer in two or more colour pattern as approved by GE, complete all as specified and directed. |
| 54 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L or J hook and washer in roof, wall etc including dismantling of old sheet, complete all as specified and directed. |
| 55 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550 MPA as in roof / wall covering fixed with self tapping screws as specified including dismantling of old sheet of any description, complete all as specified and directed. |
| 56 | S&F 0.50 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc including dismantling of old sheet, complete all as specified and directed. |
| 57 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe.290 Gde-E-165, complete all as specified and directed. |
| 58 | M & L for 16- 18mm thick granite stone of size as directed by Engr in Charge of any colour in any postion including rendering in 1: 3 CM including any type of mixture required as per manufacturers instr including dismantling of old damaged tiles/stone, complete all as specified and directed. |
| 59 | S&F providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed. Please Enable Macros to View BoQ information |
