|
| 1 | M & L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned black top surface with gunny bags to remove all loose dirt and Applying evenly a priming/ tack coat @ 5 Kg. Per 10 Sq.M using bitumen emulsion (RS-1) conforming to IS-8887 with mechanical sprayer, operated by cold pressure mechanism complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | M&L for Premixed Bituminous macadam from hot mix plant with 4% binder content by weight of total mix using paving bitumen of grade VG-30,laid with Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required gradient and camber (consolidated thickness 75 mm or less) complete all as specified and as directed by the Engineer-in-Charge.Note: Mixing of bituminous concrete shall be in hot mix plant. |
| 3 | M&L for Repairs to pot holes exceeding 30 mm depth, area not exceeding 1.00 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm depth, making good by applying tack coat with bituminous primer using bitumen emulsion @ 5 kg /10 Sqm, putting in premixed bituminous mecadam, well rammed and sealed with binder 9.8 kg per/10 Sqm blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed with power road roller of 8 to 12 ton capacity and consolidated including supply of premixed macadam, binder and chipping complete all as specified and as directed by the Engineer-in-Charge. . |
| 4 | M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned black top surface with gunny bags to remove all loose dirt and Applying evenly a priming/ tack coat @ 5 Kg. Per 10 Sq.M using bitumen emulsion (RS-1) conforming to IS-8887 with mechanical sprayer, operated by cold pressure mechanism including laying of Bituminous Premixed Semi Dense Asphaltic Concrete, 30 mm consolidated thickness, using paving bitumen of Grade VG - 30, with 5.5% of binder content by weight of total mix using Hot Mix Plant and laid with Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | M&L for cleaning and preparing the bituminous road surface and making good for road marking with reflective thermoplastic white road marking paint confirming to BIS-3262, laid through Road Marking Machine in layer of CRYSTALX (using 5kg per sqm by incorporating 8% white glass beads for reflectivity) and 2mm thick centre line, stop line etc. as per IRC pattern laid at temperature 60 degree centigrade including making necessary traffic diversion arrangement complete all as specified and as directed. |
| 6 | Dismantling Aluminium road studs/delineator any type and any size from bituminous road before road carpeting work complete all as specified and directed by Engineer-in-Charge. |
| 7 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions |
| 8 | Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including providing and embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 9 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to( IP-65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed Please Enable Macros to View BoQ information |
| 10 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to( IP-65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed Please Enable Macros to View BoQ information |
