|
| 1 | Dismantling RCC posts and struts any section including taking out embedded portion in natural ground and making good disturbed surface. |
| 2 | M&L for dismantling of existing fencing of any description,shape etc complete all as specified and as directed by Engineer-in-Charge. |
| 3 | S&F for Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde-E-165 complete all as specified & directed. |
| 4 | S & F in repair Galvanised, (hot dip) 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed (each line wire to be measured) |
| 5 | M&L for PCC Type C2, 1:3:6 (40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 6 | Preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of red oxide primer all as specified & directed. |
| 7 | Supply only Chain link MS galvanised fencing of wire mesh size 50 mm x 50 mm all as specified |
| 8 | Fixing only chain link fencing incl line wires any mesh, size and type to any type of standards, rails, straining bolts, etc incl provn of binding wire. |
| 9 | S&F MS round bar 10 mm dia as in strands for holding chain link fencing incl hooking etc complete all as specified and directed. |
| 10 | Excavation in post holes not exceeding 0.50cum getting out in Hard/dense soil, returning,filling in layers not exceeding 50 mtr and making good surfaces all as soecified. |
| 11 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, 5 to 10 mm diameter of shank, complete all as specified and directed. |
| 12 | Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid dry complete all as specified and directed. |
| 13 | Material & Laying for precast Cement concrete paver block of thickness 80mm with matt finish of M-40 grade , laid in design ( as approved and sample kept in GE office) by combination of two size of blocks 8 inch x 4 inch (coloured) and 4 inch x 4 inch( Coloured) as per the sample kept in GE office complete all as specified and directed by Engr-in-Charge. |
| 14 | M & L machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade rubber moulded with grey cement and pigment with glossy finish complete all as secified and as directed.Note-Shapes of interlocking paver block shall be triangular/Zigzag/Haxagon/or other ,Colour of paver blocks,laying pattern approved by Engr in charge. |
| 15 | M & L machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade rubber moulded with grey cement and pigment with glossy finish complete all as secified and as directed.Note-Shapes of interlocking paver block shall be triangular/Zigzag/Haxagon/or other ,Colour of paver blocks,laying pattern approved by Engr in charge. |
| 16 | M&L for parking coloured tiles of size 400x400mmx10-12mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 includind demolition/dismantling old surface/tiles complete all as specified and directed. |
| 17 | M & L for Chequered cement coloured concrete tiles 300mm x 300 mm x 25 mm thick table set and jointed, pointed in neat cement slurry with grey cement and pigment as in floor,Screed bed or bedding layer of 20 mm thick CM (1:6) as in floor, complete all as specified and directed. |
| 18 | M&L for parking coloured tiles of size 600x600mmx20 mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 includind demolition/dismantling old surface/tiles complete all as specified and directed. |
| 19 | Material & Laying for dismantelling and refixing paver blocks of any description after proper sand filling and maintaining proper slope and necessary repair complete all as specified and as directed by Engineer-in-Charge. |
| 20 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 21 | Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and directed |
| 22 | M&L for Cement concrete 75mm thick type D-2 1:4:8 as in sub base/sub floors of tiles/blocks complete all as specified and directed. |
| 23 | Material and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 includinguding making joints with or without groovesv (thickness of joints except at sharp curve shall not to more than 5 mm), includinguding making drainage opening wherever required complete all as specified and as directed by Engineer-in-Charge. |
| 24 | M&L for broken stone or boulder hardcore of guage n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface |
| 25 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed |
| 26 | M&L for 100mm thick plain cement concrete 1:2:4 type B-1 ( using 20mm crushed stone agg ) as in floors ,ramps,hard standing or as in similar work finished even and smooth without using extra cement including form work where required all as specifed and directed . |
| 27 | M&L 50mm thick PCC, type C-2, 1:3:6, ( using 20mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 28 | M&L Providing precast cement concrete 1:2:4 type B-0 using 12.5mm graded aggregates louvres and jallies, 50mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4.complete all as specifed and directed. |
| 29 | Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water |
| 30 | M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface without using extra cement including scaffolding upto 7 mtr height and curing the surface complete all as specified and directed by Engineer-in-charge. |
| 31 | Preparation of new plastered surfaces and Material & Labour for applying Two or more coats of weather proof exterior acrylic emulsion paint(1st Quality) of required shade (Company Depot Tinted) with silicon additives, over and including priming coat of exterior primer of same make on surfaces of walls complete all as specified and directed. Note :- (a) Height of Bldg : any height (b) Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality. |
| 32 | Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 33 | M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed. |
| 34 | All as per above but except bricks complete all as specified and directed |
| 35 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 36 | Supply and fix in repair Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks, cattle trap for portion framed and hung as gates,including pintel hinges,stops,hand made sliding bolts and similar work conforming to Fe.290.Gde-E-165,ornamental and intricate design complete all as spd and directed. |
| 37 | Supply and fixing 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply and fixing in repair Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with hold fasts and brackets complete all as specified and directed by Engineer-in-Charge. |
| 39 | Taking down carefully existing steel gates any type for carrying out necessary repairs by replacing old unserviceable hinges, rollers, roller plates, gate piller etc , greasing, oiling for its smooth functioning complete and re-erecting the same in old position, of any typr and any size each complete all as specified and directed by Engineer-in-Charge. |
| 40 | Material & Labour for providing and fixing stainless steel (Grade 304) Gates, grills made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing thegates with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size and fixing to RCC columns or brickwork complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply and fixing for High pressed laminate (HPL) sheets of 10mm thick having top decorative layer and entire sheet coated with clear protective layer to be fitted on gates complete all as specified and directed by Engineer-in-Charge. |
| 42 | Material and labour for granite tiles 15-18mm thick to be fixed on RCC/Brick pillars/RCC slabs for platform,stairs etc. set,fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge. NOTE: COLOUR OF THE TILE TO BE DECIDED BY ENGR IN CHARGE. |
| 43 | M&L for preparation of old concrete surface by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying two coat of floor paint for kerb stones/old concrete surfaces complete all as spd and directed. |
| 44 | M&L for Preparation of old surface of floors by brooming down with steel wire brushing, scrapping smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots and removing all loose material etc and applying two coat of exterior emulsion paint as in floor (MING RED COLOUR) complete all as specified and directed |
| 45 | Preparation of old painted steel surface of any description of any type (fencing,poles,strut any old steel surface) and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
