|
| 1 | Demolition of brick work built in cement mortar etc., complete all as specified and directed by Engr-in-Charge. |
| 2 | Brick work with sub class 'B' bricks, straight or curved on plane exc 6m mean radius built in Cement Mortar 1:3 complete all as specified and directed by Engr-in-Charge. |
| 3 | Taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Material and labour for rendering 15mm thick in cement mortar 1:3 on brick surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 5 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces complete all as specified and directed by Engr-in-Charge. |
| 6 | Excavating in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed by Engr-in-Charge. |
| 7 | Material and labour for cement concrete 1:3:6 type C-2 (40 mm graded crushed stone aggregate) as in post/strut fdn complete all as specified and directed by Engr-in-Charge. |
| 8 | S&F for Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde-E-165 complete all as specified & directed.(75x75x8mm angle use) |
| 9 | Supply and fixing in repairs, Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire complete all as specified and directed by Engr-in-Charge. |
| 10 | Dismantling chanlink fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as specified and directed by Engr-in-Charge. |
| 11 | Supply only Chain link MS galvanised fencing of wire mesh size 50 mm x 50 mm all as specified |
| 12 | Fixing only chain link fencing incl line wires any mesh, size and type to any type of standards, rails, straining bolts, etc incl provn of binding wire complete all as specified. |
| 13 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, 5 to 10 mm diameter of shank, complete all as specified and directed. |
| 14 | Supply and fixing in repairs Barbed rozor tap concertina coil SG hot galvanised spring tensile wire manufactured by make as approved by GE of UTS 220 to 245 Kg/mm2 and dia of coil when stretched 1000 mm having minimum number of circles 10/RM, minimum number of clips 25/RM & minimum weight of coil 1.625Kg/RM hot dip galvanised including taking out existing damaged concertina coil complete all as specified and directed by Engr-in-Charge. |
| 15 | Supply and fixing in repairs Barbed rozor tap concertina coil SG hot galvanised spring tensile wire manufactured by make as approved by GE of UTS 220 to 245 Kg/mm2 and dia of coil when stretched 600 mm having minimum number of circles 10/RM, minimum number of clips 25/RM & minimum weight of coil 1.625Kg/RM hot dip galvanised including taking out existing damaged concertina coil complete all as specified and directed by Engr-in-Charge. |
| 16 | Cleaning of shrubs and bushes every side the security fencing/wall before commencement of work complete all as specified and directed by Engr-in-Charge. |
| 17 | Preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of red oxide primer all as specified & directed. |
| 18 | Demolition of RCC concrete in ground floors and paving n exc 15 cm thickness (below and above ground level) complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for RCC M-25 on Walls, retaining walls,basement walls, ballastwalls and the like; any thickness; above top of footings; including attached pilasters and buttresse complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for RCC M-25 on Foundations, including rafts, footings, foundation beams; plinth beams; basesfor columns, etc.; basementslabs, under-reamed pilesand mass concrete complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc verticle or to batter complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L preperation of newely plastered surface and Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camouflage pattern (four) or more shades as directed by Engr-in-Charge incl necessary scaffolding and other safety arrangement to work at any height at site if required. |
| 25 | M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Note: The cost of bush cutting and shrubs cutting is deemed to be include in this item if required at site. |
| 26 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed by Engineer-in-Charge. |
| 27 | M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed. |
| 28 | M&L for removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed by Eng-In-Charge. |
| 29 | M&L for RCC M-25 on Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge. |
| 30 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work verticle or to batter complete all as specified and directed by Engr-in-Charge. |
| 31 | Dismantling wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and as directed by the Engineer-in-Charge. |
| 32 | S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. Please Enable Macros to View BoQ information |
