|
| 1 | SITC of 200W LED Profile Spot 19° Light, inclusive of :320 0K CCT light output for natural warm illumination High efficiency COBLED module from Philips/Osram or other reputed brands (LM80 certified)Superior color rendering with CRI & TLCI values above 95 Variable strobe function adjustable between1–25 flashes per second.Four selectable dimming curves for flexible light control. Robust black-finished housing with manual focus system Integrated 4 beam-shaping shutters for precise light cutting Optimized optical reflector for enhanced performance Advanced copper tube heat sink ensuring effective thermal dissipation.Sleek, light weight body with a distinctive modern design Adjustable mounting yoke for easy manual positioning DMX 512 compatibility with selectable 1 or 3-channel operation modes IP20 protection rating; delivers Lux levels above 9066 @ 3mtr, ideal for high lighting presenters or stage talent RDM-enabled control with ID specification for advanced configuration BIS certification compliant with IS 10322 (Part5/Sec1):2012 CE certification as per EN 60598-1:2015 and EN61437-2-13:2014 standards LM79 photo metrict estreports from NABL-accredited laboratory Genuine product assurance with embossed brand marking on the fixture body OEM must have in-house NABL-approved testing facilities for LED fixtures. LM79,Electrical,Endurance and Thermal,Surge Certificates must be submitted from the In house NABL testing facility. Make:-Leksa Lighting , Canara Lighting or Equivalent as aaproved by EIC |
| 2 | SITCof54×3W RGBW LED PAR Light , supplied complete with the following advanced technical features and performance requirements: Incorporates 54 nos.of 3 W RGBW LED ssourced from LM80-compliant,reputed manufacturer, ensuring high efficiency and reliability Supports DMX-512 communication with an 8-channel control configuration Enabling flexible programming and scene management Provides full-spectrum colour mixing via DMX control Complemented by preloaded colour effect and preset programs Features continuous 0–100% dimming capability with flicker-free performance and selectabled imming curves optimized for theatre and stage lighting use, Variable strobe function adjustable up to 20 flashes per second DMX signal input/output via both 5-pin XLR connectors for flexible system integration Wide-range sound-activated mode (65 dB – 130 dB) enabling responsive light-to-sound effects, Power CON input and output connectors for secure power connection and daisy-chain capability Precision optical system ensuring uniform beam projection and consistent colour output, IP20-rated enclosure, optimized for indoor stage, studio, and event installations Professional black powder-coated finish for an elegant and durable appearance, Multiple operating modes including DMX, Sound-Active, Master-Slave, and Auto-Run Robust pressure die-cast aluminium housing designed for long-term durability Integrated RDM (Remote Device Management) with fixture ID for remote addressing and monitoring BIS certified as per IS 10322 (Part5/Sec1) :2012, complying with Indian safety standards, CE certified in accordance with EN60598-1:2015 and EN 61437-2-13:2014 Supported by LM79 photometric test reports issued by a NABL-accredited laboratory,Embossed manufacturer’s branding on the fixture body to ensure product authenticity and prevent counterfeit substitution OEM must have in-house NABL-approved testing facilities for LED fixtures. LM79, Electrical, Endurance and Thermal, Surge Certificates must be submitted from the In-house NABL testing facility. LED Makes should be Osram or equivalent with LM 80 report . Make:-Leksa Lighting , Canara Lighting or Equivalent as aaproved by EIC |
| 3 | SITC of 400 W LED Blinder suitable for professional stage,theatre,studio,and auditorium applications.The fixture shall comply with the detailed technical specifications below.Equipped with a high-output 3200 K Chip-on-Board (COB)LED light source, COBLED shall be sourced from Philips/ Osram or any other LM80-certified, reputed manufacturer Excellent colour rendering with CRI ≥ 95 and TLCI ≥ 95 Soft-edged beam output with interchangeable 30° wide-angle optics Precision-engineered reflector system ensuring uniform and consistent light distributionFlicker-free operation with a minimum 11.7 kHz refresh rate Suitable for broadcast, film, and high-speed camera applications DMX-512 control with 8-channel control modes RDM-enabled for remote addressing, monitoring, and device identification Smooth linear dimming from 0–100% with theatre-grade fade performance Variable strobe effects ranging from 1 to 25 Hz Built-in effect macros for quick setup and show programming Maximum power consumption not exceeding 410W High-efficiency power supply unit with integrated overload and short-circuit protection Thermal protection circuitry with internal safety fuses Active cooling system incorporating low-noise, temperature-controlled fans, Robust metal enclosure with black powder-coated finish Advanced thermal management design to enhance LED lifespan IP 20-rated construction suitable for indoor professional installations Heavy-duty mounting yoke and tilt mechanism for secure positioning and adjustment 5-pin XLR DMX input/output connectors for professional signal connectivity Power input and output connectors for daisy-chain operation Integrated digital LED display for addressing, configuration, and status monitoring BIS certified as per IS 10322 (Part5/Sec1) :2012, compliant with Indians afety standards,CE certified in accordance with EN 60598-1:2015 and EN 61437-2-13:2014 Supported by LM79 photometric test reports issued by a NABL-accredited laboratory Embossed manufacturer’s branding for product authenticity and prevention of counterfeit substitution OEM must have in-house NABL-approved testing facilities for LED fixtures.LM79,Electrical,Endurance and Thermal,Surge. Make:-Leksa Lighting , Canara Lighting or Equivalent as aaproved by EIC |
| 4 | SITC of 750 W LED PROFILE Lamp . Make:- Make:-Leksa Lighting , Canara Lighting or Equivalent as aaproved by EIC |
| 5 | SITC Of 1kw Led pc Lamp Make:-Leksa Lighting , Canara Lighting or Equivalent as aaproved by EIC |
| 6 | SITC Of 1KW LED Fresnel Lamp Make:-Leksa Lighting , Canara Lighting or Equivalent as aaproved by EIC |
| 7 | SITC Of 1KW Flood light lamp Make:-Leksa Lighting or Canara Lightings |
| 8 | SITC Of 500watt CYC Light lamp Make:-Leksa Lighting , Canara Lighting or Equivalent as aaproved by EIC |
| 9 | DMX Cable of approx 60-70 meter with DMX OUT Junction Box Make:-Deepcab or Equivalent |
| 10 | Supply of hydraulic cylinder driven by Elctric motor,double arm aerial work platfom ladder with telescopic lifting mechanism made of aluminium alloy as per the following Specification:- Working Height-14 meter,Platform Height 12 meter ,capacity-200 kg, Dimension(LXBXH) 1840 X 1050 X 2000 mm .motor -1.5 kW Power-220V,50 Hz,UP-Down Control Switch,having level indicator, Emergency decline valve, 4 nos heavy duty PU wheels, 4 adjustable leg extension supports . The ladder should be designed so that it can be set at any height within the operating range for use with all safety mechanisms and one yeasr onsite comprehensive warranty with all spares.Make BOYD Inc. (model type same as DMAWPA 12A)or equivalent Please Enable Macros to View BoQ information |