|
| 1 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified amd as directed by Engr-in-Charge. |
| 2 | Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in hard/dense soil , complete all as specified amd as directed by Engr-in-Charge. |
| 3 | Returning, filling in ,including spreading,levelling ,watering and well ramming in layers not exe 25cm hard/dense soil, complete all as specified amd as directed by Engr-in-Charge. |
| 4 | Removing excavated soil material n, exe 50m and depositing where directed at a level n, exe 1.5 m above the starting point, complete all as specified amd as directed by Engr-in-Charge. |
| 5 | M&l for PCC type D-2(1:4:8) using 40mm graded crushed stone aggregate as mass conc and filling of foundation, complete all as specified amd as directed by Engr-in-Charge. |
| 6 | M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6, complete all as specified amd as directed by Engr-in-Charge. |
| 7 | M&L formwork for rough finished concrete surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and sofits (if any) of foundations and plinth beams and similar works: verticals or to batter, complete all as specified amd as directed by Engr-in-Charge. |
| 8 | M&L form work for rough finished concrete surfaces to sides of square,rectangular or polygonal pillars, posts, struts, piers, columns and stanchions, complete all as specified amd as directed by Engr-in-Charge. |
| 9 | M&L form work for rough finished concrete surfaces to sides and soffits of floor or roof beam ,beam haunchings ,girders, bresum-mers,lintles,cantilevers,shelves including supports ,overhanging, etc. also splays between floors and beams,etc, complete all as specified amd as directed by Engr-in-Charge. |
| 10 | Form work to sooffits of suspended slabs such as roof, floor slabs,landings etc n.exc 200mm thick (horizontal or sloping), complete all as specified amd as directed by Engr-in-Charge. |
| 11 | Form work to edges of concrete flats in floors openings in concrete walls floor and roof and sides of RCC/PCC bands in walls horizontal or sloping and similar work n exc 20 cm wide, complete all as specified amd as directed by Engr-in-Charge. |
| 12 | M&L cement concrete Grade M10- Type C0,1:3:6 (12.5mm graded crushed stone aggregate) in Damp proof course, complete all as specified amd as directed by Engr-in-Charge. |
| 13 | M&L Cement concrete M-25 (20 mm graded crushed stone Aggregate) in foundations, inclucing rafts, footings, foundations beams : plinth beams: bases for column, etc \\" basement slabs , under reamed piles ad mass concrete, complete all as specified amd as directed by Engr-in-Charge. |
| 14 | M&L Cement concrete M-25 (20 mm graded crushed stone aggregate) in Beams , Cantilievers, bressummers, lintles over 1.5 m span, complete all as specified amd as directed by Engr-in-Charge. |
| 15 | M&L Cement concrete M-25 (20 mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts, complete all as specified amd as directed by Engr-in-Charge. |
| 16 | M&L for reinforced cement conc M-25 (20 mm graded crushed stone aggregate) as in slab supported on walls , beam, and columns in floors,roofs landings , balconies etc., complete all as specified amd as directed by Engr-in-Charge. |
| 17 | M&L mild steel TMT bars10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified amd as directed by Engr-in-Charge. |
| 18 | All as per srl item-17 above but 8 mm dia and over upto and including 10mm dia in stirrups , spacers and binders, complete all as specified amd as directed by Engr-in-Charge. |
| 19 | M&L Hardcore with boken stone of gauge n exc 63 mm, deposited, spread and levelled and layer n exc 15 cm thick, water and rolled /rammed to a true surface, complete all as specified amd as directed by Engr-in-Charge. |
| 20 | M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded crushed stone aggregate as plinth protection finished even and smooth with out using extra cement, complete all as specified amd as directed by Engr-in-Charge. |
| 21 | M&L Forming Contraction (Dummy) joints 50 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection, complete all as specified amd as directed by Engr-in-Charge. |
| 22 | M&L PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregate) 100mm thick sub base as specified and directed by engr in charge, complete all as specified amd as directed by Engr-in-Charge. |
| 23 | M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded crushed stone aggregate as in floors including finishing the surface rough for laying finishes, complete all as specified amd as directed by Engr-in-Charge. |
| 24 | M&L for Non skid ceramic jointless/joint free coloured tiles 7 to 8 thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredcement to match over and including 15mm thick screed bed in cement mortor (1:6) , complete all as specified amd as directed by Engr-in-Charge. |
| 25 | M&L for Glazed ceramic coloured tiles in vertical surfaces 450X 350X 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles, complete all as specified amd as directed by Engr-in-Charge. |
| 26 | M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4, complete all as specified amd as directed by Engr-in-Charge. |
| 27 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified amd as directed by Engr-in-Charge. |
| 28 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section , complete all as specified amd as directed by Engr-in-Charge. |
| 29 | M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 , complete all as specified amd as directed by Engr-in-Charge. |
| 30 | M&L for 10 mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 , complete all as specified amd as directed by Engr-in-Charge. |
| 31 | M&L for 5mm thick rendering on ceiling finished even and smooth without using extra cement in cement mortar 1:3, complete all as specified amd as directed by Engr-in-Charge. |
| 32 | S&F 150mm size aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified amd as directed by Engr-in-Charge. |
| 33 | S&F 150mm size extruded aluminium handles fabricated type, anodised and fixed, complete all as specified amd as directed by Engr-in-Charge. |
| 34 | S&F 100mm size medium wt butt hinges, complete all as specified amd as directed by Engr-in-Charge. |
| 35 | S&F 300mm mild steel sliding door bolts plate type sove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate, complete all as specified amd as directed by Engr-in-Charge. |
| 36 | S&F PVC (SWR) 75mm bore Pipe single socketed in any length with rubber ring joints laid in trenches, complete all as specified amd as directed by Engr-in-Charge. |
| 37 | S&F PVC (SWR) 110mm bore Pipe single socketed in any length with rubber ring joints laid in trenches, complete all as specified amd as directed by Engr-in-Charge. |
| 38 | S&F 110mm bore PVC (SWR) bends (any radius), complete all as specified amd as directed by Engr-in-Charge. |
| 39 | S & F Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device, complete all as specified amd as directed by Engr-in-Charge. |
| 40 | S & F Vitreous China wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified amd as directed by Engr-in-Charge. |
| 41 | S&F PVC (SWR) 'S or P', trap of 110 mm bore, complete all as specified amd as directed by Engr-in-Charge. |
| 42 | S & F 750 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins, complete all as specified amd as directed by Engr-in-Charge. |
| 43 | S & F in repairs, 40mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams), complete all as specified amd as directed by Engr-in-Charge. |
| 44 | S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets, complete all as specified amd as directed by Engr-in-Charge. |
| 45 | S&F PVC connection 15mm bore with ptmt nuts of length 450mm, complete all as specified amd as directed by Engr-in-Charge. |
| 46 | S&F 15mm bore chromium plated Bib tap cast copper alloywith crutch or butterfly handle screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified amd as directed by Engr-in-Charge. |
| 47 | S & F 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified amd as directed by Engr-in-Charge. |
| 48 | S & F fancy type 15 mm bore Stop valves, chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified amd as directed by Engr-in-Charge. |
| 49 | All as per item no 48 above but angle stop valves, complete all as specified amd as directed by Engr-in-Charge. |
| 50 | S &F in Vitreous China urinals, Half stall type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified amd as directed by Engr-in-Charge. |
| 51 | S&F rotational moulded HDPE water storage tanks 1000 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48kg/Cum (cylindrical vertical type/rectantular loft type closed top) hoisted and fixed in position, complete all as specified amd as directed by Engr-in-Charge. |
| 52 | M&L applying two coats of cement base paint on new plastered surfaces including preparation of surfaces , complete all as specified amd as directed by Engr-in-Charge. |
| 53 | M&L for preperation of new concrete /plastered surface of any description,applying 3mm thick wall care putty and two coat of distemper oil emulsion over a coat of primer, complete all as specified amd as directed by Engr-in-Charge. |
| 54 | S&F Polyproplyene random copolymer (PPR) (SDR 7.4 & SDR 11 UV ) 3 layer pipe with and including SFMC fitting such as bends elbow, tee short length socket union check nuts nipple etc (female and male as required complete of size 32mm outer dia suitable for hot/cold water supply line including testing complete all as per manufactures instructions, complete all as specified amd as directed by Engr-in-Charge. |
| 55 | Description all as per srl item No-54 but 25mm bore pipe, complete all as specified amd as directed by Engr-in-Charge. |
| 56 | S&F PPR 25 MM Gate Valve (Brass insert) as per requirement of the site, complete all as specified amd as directed by Engr-in-Charge. |
| 57 | S&F looking mirror in required rectangular shape bevelled edge 5mm thick selected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washers, complete all as specified amd as directed by Engr-in-Charge. |
| 58 | S&F grating doom 100mm dia of PTMT (Minimum wt 25 grm), complete all as specified amd as directed by Engr-in-Charge. |
| 59 | S&F in repairsTowel rail 600mm long Cromum plated (Minimum weight 190 gms), complete all as specified amd as directed by Engr-in-Charge. |
| 60 | M&L for Cement concrete type B-2,1:4:8 (40mm graded crushed stone aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc., complete all as specified amd as directed by Engr-in-Charge.. |
| 61 | M&L for Chequred cement concrete tiles 20cm X 20cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6), complete all as specified amd as directed by Engr-in-Charge. |
| 62 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified amd as directed by Engr-in-Charge. |
| 63 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified amd as directed by Engr-in-Charge. |
| 64 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane, complete all as specified amd as directed by Engr-in-Charge. |
| 65 | M&L for soak well/sock pit of dia 3.00 mtr internal at top and depth of 1.80 mtr from bottom having min 2.45 mtr height 380 mm thick random rubble uncoarsed stone masonary wall in CM 1:6 woth 150mm thick PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) below stone masonary at Bottom and RCC coverslab using Design mix concrete M-25 or 1:1.5:3 nominal mix with reinforcement 10 mm dia bars @ 150 mm dia pipe connected with existing manholes cove, inlet for 100/150 dia pipe connected with existing manholes including dismantling and filling of existing soak well/soal pit and make a true surface complete all as specified as per Drg No. CESZ/TD - 107832011 sheet 1/1 Note:- The rate includes excavation in hard/dense soil and construction of soak well as per drawing, connection of inlet pipe, 100 mm dia PVC vent pipe with cowel, returning and filling and reoving of surplus soil to a distance exc 50 mtr but not exc 100 mtr from site. if any issues regarding drawing finalized by Engr in Charge during execution. |
| 66 | Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead, complete all as specified amd as directed by Engr-in-Charge for the followings:- |
| 67 | One light/exhaust fan point controlled by one one way switch |
| 68 | One switch socket outlet 6 Amps, 230 volts point on Same board |
| 69 | All as item No 66 above, but using cables 4 Sq mm size, complete all as specified amd as directed by Engr-in-Charge. |
| 70 | Supply and fixing lamp holder insulated body with back plate, complete all as specified amd as directed by Engr-in-Charge. |
| 71 | Supply and fixing Switch piano flush button single pole 6 Amps 230 volts one way, complete all as specified amd as directed by Engr-in-Charge. |
| 72 | Supply and fixing Socket out let 5 pin 6 Amps 230 volts, complete all as specified amd as directed by Engr-in-Charge. |
| 73 | Supply and fixing switch Socket combination out let multi purpose 5 pin 6 Amps and 16 Amps 230 volts, complete all as specified amd as directed by Engr-in-Charge. |
| 74 | Supply and fixing in replacement of sheet metal enclosure with 20 Amp 240 V socket plug top and MCBs single pole and neutral enclousre with two pin and earth plug and socket with one single pole 20 Amp MCB, complete all as specified amd as directed by Engr-in-Charge. |
| 75 | Supply and fixing of Ceiling rose, surface Bakelite three terminals, complete all as specified amd as directed by Engr-in-Charge. |
| 76 | Supply and fix sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways complete with blanking plates as required, complete all as specified amd as directed by Engr-in-Charge. |
| 77 | Supply and fix MCB SPN 63 Amp 240 Volts AC ISI marked , complete all as specified amd as directed by Engr-in-Charge. |
| 78 | Supply and fixMCB SP 6-32 Amps. 240 Volts 50 HZ, complete all as specified amd as directed by Engr-in-Charge. |
| 79 | Supply and fixing Exhaust fan , steel body AC Single phase 230V of size 300 mm sweep with blades frame and lovers, complete all as specified amd as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 80 | Supply and fixing Exhaust fan , steel body AC Single phase 230V of size 300 mm sweep with blades frame and lovers, complete all as specified amd as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
