|
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc. 1.50 Sqm but not exc. 4 Sqm each, removing from the site including taking out existing hold fast etc. complete all as specified and as directed. |
| 2 | Supply and fixing for aluminium anodised frame work as in partition wall, doors, window & ventilator chowkhat with one or more rebates including joining beads, cleat sets weight not less than 0.55Kg/Rm complete all as specified & as directed by Engineer-in-charge. |
| 3 | S&F in for Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 4 | S&F in for Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and as directed. |
| 5 | S&F for 6.30 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and as directed. |
| 6 | M & L for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other plart made of mild steel heavy duty and fixed all as directed. |
| 7 | M&L in for Anodized aluminium DECO grill, made of 6mm dia aluminium bars, size of mesh 50mm x 50mm, fixed with aluminium frame of size 50mm x 50mm x 1.9mm thick for aluminium window complete all as specified and as directed. |
| 8 | S & F in for Aluminium Mortice lock vertical type size 75mm 04 levers complete all as specified and as directed. |
| 9 | S&F as Door closer Aluminium (Die cast) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
| 10 | S & F for door seal bottom made of aluminium body with nylon rubber bottom or bristles with not less than 94 cms in length for blocking of the entry of dust and crawling elements under the door complete all as specified and as directed. |
| 11 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc complete all as specified and as directed. |
| 12 | M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 13 | Dismantiling of wall and ceiling boards (fiber, pulp, insulstion, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed |
| 14 | M&L for 4mm thick non asbestos fibre cement building designed boards, fixed or laid/ inserted to timber/GI/Aluminium framework with screws and fixed in celing flat or slope complete all as specified and as directed. |
| 15 | S&F of 605X605 mm anodised Aluminium snap grid frame work for false ceiling incl all required fixing accessories using necessary tools etc. complete all as specified and directed |
| 16 | Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc. all as specified and directed. |
| 17 | M&L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 mixed with water proofing compound, surface finished even and smooth complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately. |
| 18 | M & L 15mm thick rendering in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed |
| 19 | M&L for rendering 5mm thick in CM (1:3) on ceiling surfaces complete all as specified and as directed |
| 20 | Supply only integral water proofing compound as per latest IS specification complete all as specified |
| 21 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil distemper complete all as specified and as directed. |
| 22 | M&L preparation of newely plaster surfaces and appplying two coats of cement base paint over primer coats of alkali resistance priming paint all as per manufacturer's instruction complete all as specified and directed |
| 23 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surface complete all as specified and directed. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete, all as specified and directed by Engr-In-Charge. |
| 25 | Supply and fix vitrified tiles (light shade) of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqmas in floor set and jointed in neat cement slurry @ 3 kg per Sqm and pointed in coloured cement to match the shade of the tiles over and incl. 20mm screed bed in CM (1:6) complete all as directed. |
| 26 | Supply and fix vitrified tiles (light shade) of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles over and incl. 10mm rendering in CM (1:3) complete all as directed. |
| 27 | M&L 18-20 mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement sand mortar backing and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick backing in CM 1:4 complete all as specified and directed by Engr -in-Charge. |
| 28 | M&L for Granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing for platform, shelves, partitions etc complete all as specified and directed by Engr -in-Charge. |
| 29 | Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed. |
| 30 | M&L for 12mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work for cabinet,S complete all as specified and as directed. |
| 31 | M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and as directed. |
| 32 | M&L for 4mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and as directed. Please Enable Macros to View BoQ information |
