|
| 1 | (A) Civil Works |
| 2 | Excavation work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all kinds of soil, (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated earth soil and disposal of surplus excavated soil as directed,within a lead of 50 m. |
| 3 | Providing and laying reinforced cement concrete work in design mix of M30 grade in foundations, beams, columns, slab, sunshades etc. wherever required. (Design mix should be submitted by vendor at the time of execution with NABL laboratary report) excluding the cost of centering, shuttering and reinforcement but including cost of Cement (OPC 53 Grade-UltraTech, ACC, Nagarjuna & KCP) and all other materials & men etc., complete |
| 4 | Supply and providing HYSD bar reinforcement of Fe-500 grade of approved make SAIL / RINL / TISCO including transportation, straightning, cutting, bending and binding with annealed binding wire of 18 gauge (1.22mm dia) complete all labour and material etc., complete all as directed |
| 5 | Supply, Fabricate and Fixing of Structural steel work using MS Angles, Flat bars for cladding, frame work and fabrication work (to be informed by HSL) including two coat of anticorrosive paint over one coat of primer complete all as directed by the Engineer Incharge. (Note:The nature of work is to be carriedout at 0-10M from the Ground level) |
| 6 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for black Granite platforms as per requirement, approved shade, colour and texture including Providing edge moulding and machine polishing to edge to give high gloss finish etc. laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including removing/Chipping the old surface & Disposal, rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 7 | Supply and providing ACP Cladding - 5 mm ACP Sheet of size 8' x 4' with aluminium cover sheet of 0.5mm thickness, Exterior face coil coated with PVDF including required MS frame work etc., complete all as directed by EIC. |
| 8 | Supply, Fabricate, and Fix of MS Structural Steel Gate by using square Hollow sections as per drawing. Thickness shall be as per IS Code : IS 4923:1997 with safety precautions for Arc Welding , Grinding with smoothed welded joints surfaces , aldrop, including lock arrangements, handle, side support to holding with Existing RCC column with installation using Concrete (1:1.5:3) as per approved Drawing and approved colour as directed by Engineer Incharge. Item Includes Providing two (02) coats of Epoxy paint over a coat of red oxide where ever specified of approved brand (Asian / Berger / Shalimar / Nerolac) (Item includes Supplying and Installation of Decorative Steel Design Units as per Drawing including Gold Colour Enamel Paint) including loading and unloading complete all as directed. |
| 9 | Providing and fixing of SS Gold colour lettering :(i) 2X2 feet - English - \\"HINDUSTAN SHIPYARD LIMITED\\"(ii) 1X1 feet - English - \\"A GOVERNMENT OF INDIA ( MINISTRY OF DEFENCE) UNDERTAKING ESTD. 1941\\" |
| 10 | Providing and fixing of glow light lettering :(i) 6\\" X 6\\" - English - \\"A MINIRATNA COMPANY\\" |
| 11 | Provide and place in position Micro concrete (M-40) which shall be cement based prepacked component such as Rendrock - RG of fosroc make or equivalent mixed with 6mm size coarse aggregate in specified percentage by weight subjecting to the maximum of 50% as dtrected by the engineer incharge including mixing with suitable and approved mixing machine, pumping of concrete under pressure where ever required to ensure that the concrete laid for encasement is dense, properly compacted, free from honey combs, and necessary scafolding as directed by the engineer in charge. (Work shall be carried out at a level of 0.0M to 18.0M from Ground level) |
| 12 | Providing machine for mirror polishing to existing SS Railing with abrasive pads of suitable grades to achieve uniform shining as per directions of Engineer in charge including cleaning & all required materials etc., complete. |
| 13 | Providing two(2) coats of synthetic enamel paint for Arch Structure etc., of required colour using approved branded paints like Asian / Berger / Nerolac, after removal of rust using wire brush or sand paper to give an even shade on old work including applying Metallic Putty , One coat of zinc rich primer complete all as directed. |
| 14 | Providing modified polymer mortar with cement sand ratio in 1:3 using Nito-bond SBR @ 7 Lits per Bag of cement, average thickness of 20 mm over the primed surface using Nito-Bond SBR in 1:1:3 by volume (SBR:Water:Cement) with necessary scaffolding arrangements etc. including cleaning of rest on reinforcement and application of nito zinc primer of fosroc make etc., complete |
| 15 | Providing & fixing UPVC 3 track sliding windows with 5mm thick forsted toughened glass shutters of 2 Nos and One no of mosquito mesh with SS304 shutter with locking arrangements of approved make Kommerling / Deceuninck / NCL veka / Aparna Venster or equivalent including all accessories etc., complete all as directed |
| 16 | (B) Electrical Works |
| 17 | Supply, fix, test and commissioning of 12way STPN Double door MCB DB with 10ka,40A isolator as incomer and MCBs SP16/10A MCBs as outgoings, as directed by the engineer incharge. (App .makes CG/Havells/Phillips.) |
| 18 | Supply, fix, test and commissioning of 7/9watt LED Spot light as directed by the engineer incharge. (App .makes CG/Havells/Phillips or any other standard make) |
| 19 | Supply, fix, test and commissioning of Decorative lighting watt / ceiling mounted with all accessories. (Approved make Schneider/Wipro/ Jaquar/ philips/ CG/ Havells or Equivalent.) |
| 20 | Supply, fix, test and commissioning of 1'-profile type LED with all accessories, as directed by the engineer incharge. (App .makes CG/Havells/Phillips ot equivalent.) |
| 21 | Concealed PVC conduit wiring with 3 runs of 4.0 sq.mm FRLSH PVC flexible copper wires run through PVC pipe concealed the all drops and switch boards for One point controlled by one switch.(App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 22 | Concealed PVC conduit wiring with 3 runs of 2.5 sq.mm FRLSH PVC flexible copper wires run through PVC pipe concealed the all drops and switch boards for One point controlled by one switch.(App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 23 | Concealed PVC conduit wiring with 3 runs of 1.5 sq.mm FRLSH PVC flexible copper cable for One point controlled by one switch as directed (It includes finishing with CM 1:5 and surface to match with the existing surface. (App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 24 | Supply, installation, testing and commissioning of out door lighting with designer LED street light with pressure die cast housing of IP ,60 Watt capacity including supporting bracket & clamps.(Approved make :Phillips/CG/Havells/ABB or Equivalent.) Please Enable Macros to View BoQ information |
