|
| 1 | Excavation in post holes in soft and loose soil (or similar holes) each n exc 0.50 cum getting out returning and filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25 cm and removing of surplus soil to distance n exc 50 m and making good surface complete all as specified and as directed. |
| 2 | Material and labour for PCC 1:2:4 type B 2 (40 mm stone aggregates) in filling in post holes/column or as in bed block concrete complete all as specified and as directed. |
| 3 | Material and labour for Cutting hole of superficial area exc 150 sq. cm but n exc 400 sq. Cm into or through brick wall built in cement mortar or cement lime mortar or stone wall built in cement lime mortar or wall of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including inserting GI/Galvalume sheet and making good with cement mortar 1:3 as required complete all as specified and as directed. |
| 4 | Supply and Fixing of mild steel crew bolts of dia of neck 11 mm to 15 mm, with hgexagonal and squiare head one end and screwed the other,or screwed both ends: each screwed end to be fitteded with washers and one hexagonal or square nut, lenghth of bolt exc 22.5 cm and n exc 30 cm long complete all as specified and as directed. |
| 5 | Supply and Fixing of Steel work in tubular trusses, main and cross beams, column and struts, hip and jack rafter; purlins, where connected to common rafters and fixed including angle cleats, base plates, gusset plates, necessary items or other connecting items including riveting and welding complete all as specified and as directed, including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to I. S.1161:1979 grade St. 240 |
| 6 | Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 7 | Supply and Fixing pre-painted galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any clouur having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self taping screws complete all as specified and directed. |
| 8 | Surface excn n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 9 | Material and labour for hard core of gauge n.exc. 63 mm, deposited, spread and levelied in layers n.exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 10 | Supply, laying and fixing at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more thann 5 mm), including making drainage, complete all as specified and directed. |
| 11 | Material and labour for 75 mm thick PCC (1:4:8) type d 2 using 40 mm graded agg as in sub base of floor, complete all as specified and directed. |
| 12 | Material and labour for vibratory rubber moulder coloured precast concrete interlocking paver block, any shape and size conforminng to IS 15658-2006, ISI marked of 80 mm thickness, grade M-40 with grey cement and pigments over and including a layer of sand cushioning, 25 mm thick complete all as specified and directed. Please Enable Macros to View BoQ information |
