|
| 1 | Appendix A |
| 2 | 15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. |
| 3 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 6 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 7 | OD35862/2025-2026:MS Pipes 250mm - Manufacturing supplying and fitting 250mm dia MS pipe of various length with shell thickness 6mm including painting with 2 coats of red oxide primer, laying the same to line and level as directed by departmental officers at site. |
| 8 | OD35873/2025-2026:MS Flanges for 250mm pipe - Manufacturing supplying and fitting 250mm dia MS Flangehaving shell thickness 10mm depth 75mm with suitable bolt ,holes,fixing the flange in positionwith required welding around the flange,pipe joint grinding for smoothing the weldedportion,including painting with red oxide primer etc. complete as directed by departmentsofficers |
| 9 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 10 | OD46866/2025-2026:Manufacturing, supplying and fitting 250 mm MS bend to suit the alignment at site with sheet thickness 6 mm including painting with two coats of red oxide primer and laying the same to correct lines and levels etc. complete as directed by the departmental officers at site |
| 11 | OD50092/2025-2026:Manufacturing, supplying and fitting 300 mm MS bend to suit the alignment at site with sheet thickness 6 mm including painting with two coats of red oxide primer and laying the same to correct lines and levels etc. complete as directed by the departmental officers at site |
| 12 | 60.10:MS Flanges for 300mm pipe - Manufacturing supplying and fitting 300mm dia MS Flange having shell thickness 10mm depth 75mm with suitable bolt ,holes,fixing the flange in position with required welding around the flange,pipe joint grinding for smoothing the welded portion,including painting with red oxide primer etc. complete as directed by departments officers. |
| 13 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 14 | OD54318/2025-2026:Fitter for dismantling and re-laying works of MS pipe and base plate as per the direction of departmental officers at site. |
| 15 | OD54317/2025-2026:Engaging coolie for loading, unloading and stacking of MS pipes and base plate as per the direction of departmental officers at site. Please Enable Macros to View BoQ information |
