|
| 1 | Earth work in excavation of foundation in hard soil including dressing and levelling the bed with cost and conveyance |
| 2 | Supplying of all materials, labour, T&P for filling in foundation & plinth with sand well watered and rammed including cost and conveyance |
| 3 | Supplying of all materials, labour, T&P for providing and laying plain cement concrete in C.C (1:4:8) by using 4cm sized bhg metal as leveling coarse in foundation and plinth etc. complete all depth and height including cost, conveyance, royalty, curing and T&P etc. complete as per the direction of Engineer in charge. |
| 4 | Fly ash Brick masonary in foundation and plinth in C.M. (1:4) including all cost etc. complete. |
| 5 | C.C work of m 20 grade with 20 mm and down grade bhg CB chips including hoisting and laying |
| 6 | Plinth Beam |
| 7 | lintel |
| 8 | roof slab |
| 9 | `Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete. |
| 10 | Fly ash Brick masonary insuper structure in C.M. (1:6) including all cost etc. complete. |
| 11 | Providing fitting, fixing of Aluminium door with anodized Al. door section of 9202 as verticalmember, 9201 as top member and 9200 as bottom and middle member with frame section as 9221by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete. including cost of 5mm thick black glass. |
| 12 | Supplying of all materials Labour, T&P for providing 12mm thick cement plaster in C.M 1:6 including all cost, conveyance, Royalty and curing etc. complete outside. |
| 13 | 16mm thick C.P (1:6) over brick work including cost and conveyance of all materials, labour, royalty, T&P etc. complete. |
| 14 | 12mm thick C.P. in C.M.(1:4) over brick masonary to the smooth surface with neat cement punning including watering curing, cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engg-in -charge. |
| 15 | Supplying of all materials Labour T&P for Providing weather coat of two coat over one coat of primer of approved make & finished including cost of paint etc, all charges complete. |
| 16 | Fixing vertified tiles in floors treads or steps and landing of sizes (600x600)mm on20 mm thick cement mortar (1:4) jointed with white cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles (new work only) Data for 10Sqm,SR 2012 other building item . |
| 17 | Fixing of ceramic wall Tiles in dadoos,skirting,risers of steps on 12mm thick cp (1:3) jointing with neat cement slurry mixed with pigments to match the shade of the tilrs including costs of tile/stone |
| 18 | Supplying of all materials labour, T&P for providing 25mm.thick Grading concrete (1:2:2) by using 12mm Chips (C.B) to roof slab with water proof Compounds treatment including all cost, conveyance, Royalty and curing etc. Complete. |
| 19 | 6mm thick C.P. in C.M.(1:4) over R. c c work finished smooth including watering curing, cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engg-in -charge. |
| 20 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes (as per IS-15778-2007 of SDR-11 class-1 grade similar to ASTM D 2846) on the surface with proper clamping system, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Supplying all materials,labour,T&P & fitting and fixing of following different water supply fittings as per ASTMD-2846 with supply of all necessary jointing materials etc all complete as per direction of Engineer-in-charge. |
| 21 | 32mm dia |
| 22 | 25mm dia |
| 23 | 20mm dia |
| 24 | Supplying all materials,labour,T&P & fitting and fixing of following different water supply fittings as per ASTMD-2846 with supply of all necessary jointing materials etc all complete as per direction of Engineer-in-charge. |
| 25 | 32mm dia |
| 26 | 25mm dia |
| 27 | Supplying all labour , T&P and materials & making grooves in brick/stonewall vertically and horizontally to the required depth & width for fixing pipes & fitting in grooves , testing the pipe line against the leakage & filling the grooves with CM ( 1:4) to bring the surface to the original level including the cost of the machine , conveyance etc all complete as per the direction of Engineer-in-charge. |
| 28 | Supplying all materials labour,T&P and cutting holes through existing brickwork including supply of all materials & making good the damages for taking PVC pipes and fittings etc all complete as per PH specification and direction of the EIC |
| 29 | supplying & fitting of Porcelain A.I.W.C with P-trap of white glazzed viterious china ware of approved standard quality including cost of joining material etc.all complete |
| 30 | supplying & fitting of Porcelain Flat back standing Urinal (Medium) 380 x580×350 of white glazzed viterious china ware of approved standard quality including cost of joining material etc.all complete |
| 31 | i) Providing and fixing counter wash basin: White Vitreous china Wash basin size 560x455mm including full thread waste coupling but excluding the cost of pillar cock, including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 32 | Supplying all materials, labour, taxes, T & P and fitting & fixing of different water supply CP on Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing, including all cost of labour, materials, conveyance, loading, unloading, T&P etc. all complete as per direction of Engineer-in -charge. |
| 33 | Pillarcock |
| 34 | Lift cock |
| 35 | 15mm dia anglular stop cock |
| 36 | Robe hook |
| 37 | C.P Flanges |
| 38 | C.P Extension piece 15mm |
| 39 | Concealed stop cock |
| 40 | mirror 600 x 400 |
| 41 | soap case |
| 42 | corner self |
| 43 | towel rail 24\\" |
| 44 | Toilet paper holder Please Enable Macros to View BoQ information |
| 45 | Toilet paper holder Please Enable Macros to View BoQ information |
