|
| 1 | Pouf SeatingProviding 450mm diameter and 400mm high Pouf Seating made out of metal frame structure ,wooden finish with high density foam of Chenile /leatherette upholstery with matching thread , Overlooking removable for washing or correction of approved color and Make as approved by the Engineer-in -charge. Avoid sharp edges nail or screw pointing out of the surface.Make: Geeken/Godrej (Adaptive-1) or as approved by authority |
| 2 | Pouf SeatingProviding Round Puffy, Wooden Frame, Fabric TapestryOverall Size: 600mm Round X 450 mm high Pouf Seating made out of metal frame structure ,wooden finish with high density foam of Chenile /leatherette upholstery with matching thread , Overlooking removable for washing or correction of approved color and Make as approved by the Engineer-in -charge. Avoid sharp edges nail or screw pointing out of the surface.Make: Geeken/Godrej (Adaptive-6) or as approved by authority |
| 3 | High chairProviding High Back Chair, Wooden Frame, Leatherette Tapestry, Cushion Arm, Knee Tilt, Gas Lift, Aluminium Base ergonomicaly designed made out of rounded metal structure with powdercoated finish, backrest welded with approved colour finish and seating made out of high density foam with approved colour chenille upholstery and rubber bushes. Avoiding sharp edges nail or screw pointing out of the surface.Make: Geeken/Godrej or as approved by authority |
| 4 | Executive Chair:Providing Low Back Chair, Leatherette Tapestry, Cushion Arm, Chrome Base, Gas Lift, Swivel Tilt Ergonomically assessed rotating chair with adjustable head support attached to ergonomically formed, flexible plastic backrest frame supporting regulative mesh material made of 100% Polyester with tilting mechanism. The Lumbar support cushion to provide additional support at the back, T armrest with armrest pads made of soft polyurethane with adjustable height. Ergonomically moulded polyster upholstery covering breathable polyurethane (PU) moulded foam of thickness: 5cm of seating supported by metal legs with SS finish attached with five armed twin castors and height adjustable lever as indicated in image , Color and Make as per the approval of Engineer-in -charge.Make: Geeken/Godrej (Austin-1) or as approved by authority |
| 5 | Visitor's Chair:Providing Visitor Chair, PP Arm, Chrome Plated Pipe stand Leatherette TapestryMake: Geeken/Godrej (KESSEL 3) or as approved by authority |
| 6 | Seminar hall chairProviding and fixing heavy duty fully upholstered seminar hall chairs 520mm centre to centre supported with powder coated metal frames, individualy moulded seat with back cusions made up of polyurethane foam covered with approved upholstery . Foldable writing pad made up of 25mm thk machine pressed prelaminated particle board secured with 2mm thick PVC lipping attached to powder coatedmetal armrest with metal fastner. The chair rest on the ground on two side panel frames made out of upholstered 6mm partical board , the side panel board is grouted to the floor by anchor bolt system.Auditorium Chair, Push Back, PU Foam, PU Arm, Fabric TapestrySize: V550(L) X 660(D) X 965(H)Make: Geeken/Godrej (Audi-1) or as approved by authority |
| 7 | Three seater SofaProviding Three Seater Sofa, Wooden Frame, Wooden Gold Plated Leg, Size (in mm): 2120(L) X 900(D) X 850(H)Make: Geeken/Godrej (STEPHEN 3) or as approved by authority |
| 8 | Two seater SofaProviding Two Seater Sofa, Wooden Frame, Wooden Gold Plated Leg,Size (in mm): 1520(L) X 900(D) X 850(H)Asmara Fine Leatherette TapestryMake: Geeken/Godrej (STEPHEN 2) or as approved by authority |
| 9 | Single Seater SofaProviding Single Seater Sofa, Wooden Frame, Fabric Tapestry with medium back rest and arm rest made out of wooden/metal frame structure with high density foam padding Chenile/ leatherette upholstery supported by crome plated metal legs with rubber bushes of approved color and Make.Wooden LegMake: Geeken/Godrej(Adaptive-10) or as approved by authority |
| 10 | Single Seater SofaProviding Single Seater Sofa, Wooden Frame, Wooden Gold Plated Leg, Seat Back Asmara Fine Leatherette TapestrySize (in mm): 920(L) X 900(D) X 850(H)Asmara Fine Leatherette TapestryMake: Geeken/Godrej (Stephen-1) or as approved by authority |
| 11 | Designer PoufProviding Designer Pouf of customized design, Wooden Frame, Fabric Tapestry with medium back rest and arm rest made out of wooden/metal frame structure with high density foam padding Chenile/ leatherette upholstery supported by crome plated metal legs with rubber bushes of approved color and Make.Wooden LegMake: Geeken/Godrej(Adaptive-10) or as approved by authority |
| 12 | Canteen Table:Providing factory make Café Table, SS Pipe Frame, 25mm PLPB Edge Banded TopCafé Table, SS Pipe Frame, 25mm PLPB Edge Banded Top Size: 750mmX750mmX 750mm Make: Geeken/Godrej (GC 9042) or as approved by authority |
| 13 | Cafe Table:Providing factory make Café Table, SS Pipe Frame Chrome Finish, Granite Top,Size in mm - 900 X 900Make: Geeken/Godrej (GC 956) or as approved by authority |
| 14 | Cafe Table:Providing factory make Café Table, SS Pipe Frame, 25mm PLPB Edge Banded TopSize in mm - 1200 X 750 X 750Make: Geeken (GC 9062) or as approved by authority |
| 15 | Cafe Table:Providing factory make Café Table, SS Pipe Frame, 25mm PLPB Edge Banded TopSize in mm - 750 X 750 X 750Make: Geeken (GC 9063) or as approved by authority |
| 16 | Cafe chair:Providing factory make MS Frame Wooden Color PP Shell, MS FrameMake: Godrej/Geeken (GC 9072) or as approved by authority |
| 17 | Providing and fixing Workstation Table, Desk Based Partition, Particle Board Edge Banded TopMake: Godrej/Geeken (GC 9072) or as approved by authority |
| 18 | Providing and fixing Steel Library Rack (Double Face), Thickness 0.8mmW940 X D600 X H2110Make: Godrej/Geeken (GMS 17) or as approved by authority |
| 19 | Providing and fixing Steel Library Rack (Single Face), Thickness 0.8mmW925 X D300 X H1800Make: Godrej/Geeken (GMS 18) or as approved by authority |
| 20 | Providing and fixing Metal Book Case, 4 Doors, Thickness 0.8mmW915 X D320 X H1750Make: Godrej/Geeken (GMS 19) Godrej |
| 21 | Workstation/TABLES AND COUNTER/ Designer stations and sittingProviding and supplying Table and Counter IN PROFILE MANNER made out of using 19 mm Marine ply conforming IS 710 ply all along the sides of table top, with computer cpu storage trolley, hafele telescopic key board drawer, monitor brackets, SS cable manager, glass top etc., with storage units below with 3 drawers on hafele telescopic channel complete underside storage with shutter. The bottom of the storage unit to have 30 mm x 75 mm skirting in New Burma Teak wood having size 450 mm x 600 mm x 730 mm, all visible internal surface of drawers and storage shall be Laminate or Zurich Laminate d (1.0 mm thick) in approved shade and brand, complete with necessary hardwares as per specifications. All edges of the Marine grade plywood conforming IS 710 to be fixed with TW beading patti 10 mm thick with necessary width as required, with external visible surfaces with approved shade of 6 mm thk. corian on all visible surfaces of the necessary 2 colours as approved complete with all hardwares as per specifications and drawings and on top 12mm clear glass cristal edge finish.Size : as per drawingMake:- Plyboard: Grenply/ Century/ AustinMica laminate: Greenlam/ Merino/ Sunmica |
| 22 | Filing cabinet :Providing and fixing storage cabinet in 19mm plyboard with laminate finish and middle support made up of 25mm thick machine pressed prelaminated particle board and 18mm thk four number of shutters with locking facility, SS handles, Soft-Close Concealed Hinges and supporting accessories .450mm high intermediate shelves all in 18mm thickness particle board . Color Make as approved by Engineer-in -charge.Size : as per drawingMake:- Plyboard: Grenply/ Century/ AustinMica laminate: Greenlam/ Merino/ Sunmica |
| 23 | Custom made Book Storage/cabinets etc.Providing and fixing custom made with 19 mm marine ply board with 1 mm thk laminate/ PU polish finish along with shutters as per requirement & design. Shutters to be provided as provision in design with 8 mm thk toughned glass attached to the plyboard with laminate finish frame with locking facility, SS handles, Soft-Close Concealed Hinges and supporting accessories , the book storage will have 6 equal horizontal divisions of 18mm thickness ply board in 2.1 m high storage racks. Thee 1.2 m high storage cabinets will have 2 partitions. Size : as per drawingMake:- Plyboard: Grenply/ Century/ AustinMica laminate: Greenlam/ Merino/ Sunmica |
| 24 | Providing lounge Chair for Library , MS powder coated frame, seat back leatheratte tapestry Model : ADAPTIVEMake : Geeken, Godrej |
| 25 | Providing lounge Chair for Library , Wooden frame, seat back leatheratte tapestry Model : ADAPTIVE 11Make : Geeken, Godrej |
| 26 | Extra for Acrylic solid surface top or sides6mm Thick ACRYLIC SOLID SURFACE- STARON ( SAMSUNG / LOTTE )(appvd. Colour ) Providing and fixing 6mm thick Acrylic Solid Surfaces of Approved colour/make fixed on plywood OR Partition, Panelling with necessary adhesive in required shape OR fixed as per Manufacturer's Specification to required surface including edge moulding , polishing, buffing, joint's matching etc. complete as per detail drawing and instructions of Architect/ engineer in-charge (Basic Cost of Material is Rs.4000/- Per SQM) MAKE : MERINO, SAMSUNG, DUPONT |
| 27 | Providing and fixing storage cabinet 750 mm high made out of 19mm thick Marine grade plywood conforming IS 710 plywood of approved make including the fixing of shelves at 400 mm to 450 c/c and the shutters shall be in 19 mm thick marine block board and back covered with 8 mm marine plywood. The top edge shall be 1.5\\" to 2\\" thick and finished with 1.0 mm thk. laminate glossy white laminate of the approved make and shade with the provision of necessary grooves between the top edge and shutters below. The shutters shall be fixed with S type L hinges of approved make so as to get an equal 8 mm groove between all the shutters at the opening and hinged end of every shutter as per the detailed darwing. The shutter shall be fixed with SS chain from inside so as to open the shutter less than 90 degree and to avoid the breaking of laminate at the hinged end. The shutter shall be finished externally with approved quality 1.0 mm thk. laminate of approved shade and make and internally would be finished with 0.8 mm thk. balancing white or off-white laminate. The rate shall be inclusive of provision of SS \\"D\\"type handles 4\\" or 6\\" as approved, Godrej or Vijayan locks with 3 keys and all the necessary hardware, fixtures, fittings etc complete in all respects as directed by the Architect/ engineer in-chargeSize : as per drawingMake:- Plyboard: Grenply/ Century/ AustinMica laminate: Greenlam/ Merino/ Sunmica |
| 28 | FULL HT. SOLID PARTITIONS - Providing and fixing in position full height solid bend ( curved ) partition in position as indicated in the drawing excluding the door made out of aluminium hollow sections of 65mm x 37mm size 1.5mm thick of JINDAL / INDAL make as internal frame structure placed horizontally & vertically in 550 mm x 550 mm or 600mm x 600mm center to center or as directed by the Architect. The alternate corner vertical members of the partition shall be taken upto the ceiling level (payment shall be made for the partition measured upto below the false ceiling level) and the same shall be anchored to the ceiling securely with the help of suitable cleats. The framework shall be fixed with 9 mm thick flexible Marine grade plywood conforming IS 710 of approved make on both sides finished as per folllowing specifications.The necessary openings in the partitions shall be provided for A.C. Grill, Electrical Conduits, Electrical Switches, Light Fixtures,Painting, A.C. Opening, Running display Speaker, Fire Detectors, Electric Fixtures, Wall Paintings, Planter Boxes, Mirror,fixtures etc. complete as per requirements/instructions of the Architect / EngineerThe height of the partitions upto soffit of false ceiling / laminate finish top shall be considered for payment. The alternate, corner vertical members of the partition shall be fixed with necessary brackets /supports at RCC levels. The framework above the false ceiling shall not be considered for payment. The partition will be measured from the plywood covered area to the nearest cm. The item does not include the doors.The Partition shall be finished with 1.0 mm thick laminate of approved shade and make on both sides with the provision of groove in the same of size 12mm x 12mmx 18 mm ht. and as directed by the Architect etc. complete.The Partition shall be finished with 1.0 mm thick both side Solid Core Laminate of approved shade with the provision of groove in the same of size 12mm x 12mmx 18 mm ht. and as directed by the Architect etc. complete.Size : as per drawingMake:- Plyboard: Grenply/ Century/ AustinMica laminate: Greenlam/ Merino/ Sunmica |
| 29 | PANELLING - COLUMN / WALL PANELING - LAMINATE FINISH WITH GROOVESProviding and fixing column panelling made out of aluminum hollow section of 65mm x 37mm size 1.5mm thick of JINDAL / INDAL as internal frame structure placed horizontally & vertically in 550 mm x 550 mm or 600mm x 600mm center to center or as directed by the Architect. The framework shall be fixed with 1 sheet of 8 - 12mm and the other sheet of 12-18 mm thick Marine grade plywood conforming IS 710 so as to form a groove of 12 mm x 12 mm x 18 mm in ht. as indicated in the detailed drawing. floor level. The panelling and the groove formed shall be finished with 1.0 Solid Core Laminate , SF laminate , Zurich Laminate , 4mm - 6mm thk toughned glass in white colour of approved shade and colour all complete as per instructions of Architect. The item also includes scaffolding for maximum height upto 4.0 m from floor level. |
| 30 | Toughened glass partition: Providing and fixing of fully glazed frameless glazed partition made out of 12 mm thk. Toughened glass with SS finish patch fittings of Enox or approved make.. complete with all respect with all hardware, fittings, fixtures etc. complete in all respects. The partition shall include the provision of the necessary cut-outs if required for communication or as directed by the Architect or Client and the edges of the same shall be mirror polished along all edges. the rate is not inclusive of the glass doors. |
| 31 | Newspaper StandProviding Newspaper Stand, MS Powder Coated Frame, 18mm Thick PLPBReading Board, Reading Board Size: 900 X 600 mmolor and Make as per the approval of Engineer-in -charge.Make: Godrej/Geeken (NPS 1) or as approved by authority |
| 32 | Lockers:Providing lockers of size 1500mm X 2000mmX450mm , each unit with 500mmX 500mmX450mm mild cold rolled steel, free from imperfections with powder coat finish. each locker shall have an individual door and frame, an individual top, bottom, back and shelves with common intermediate uprights separating units with seperate doors ventilated by louvers on the face of each door with handle, locking system, number plate, master key and supporting hinges .Make: Godrej/Geeken |
| 33 | Providing & Fixing Conference Table MINGLE MODULAR PLT_1 STR SHARED 48 STRMake: Godrej/GeekenWork Surface-Made of 36mm thick MDFone side prelaminate board conforming to IS14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Full length access panel is provided with soft closing hinges inline with worktop edge. Worktop is available in various shapes. Understructure-The understructure consist of mixture of 18mm and 25mm Thick Prelaminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thickPVC lipping. Wire Management-An array of panels made of 0.8mm and 1.2 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables.Cutout for Standard Anchor Roma 4 module is provided for electrical fittings in Straight two seater and single seater modules below access flap per seat. AV Details-The table is equipped with Extron cables cubbies along with cable retractors as standard offering only for 1800mm head module, 2350mm head module, 150° head module and 165° head module. For straight two seater and single seater modules, provision to mount AV cables is provided (eg. HDMI,VGAA, etc). Only Corner 90°, 30° corner and 50° corner modules have provision for wire flow between adjacent tables. Additional Wirecover made of 0.8mm Thick CRCA, provided below worktop to conceal MicroAV Detailsphone wires running from table top to wire tray. This product should be certified by GREENGUARD, Indoor Advantage GOLD, GRIHA & SVAGRIHA & GREEN PRO |
| 34 | Supply of Ace - Conference Chair Overall FU3002AC153SXXXX - Conference Make Godrej interio/GeekenDimensions of Chair Seat Height - 49.0 cm Height - 99.0 cm Width & Depth of Chair as measured from pedestal - Width-70.5 cm and Depth-70.5 cm 1. SEAT/BACK ASSEMBLY: TheCushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylon)& upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric.The Net Back should be made up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn. Full BackSize: 46.5 cm. (W) x 60.0 cm. (H) Seat Size : 51.0 cm. (W) x 49.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density= 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgf for 25% compression. 3. BACK SPINE: The support spine should be made up of High Pressure Die cast polished hed Aluminum. 4.ARMRESTS : The armrest should be having two adjustment, Height (6.0±0.5cm) and Depth (6.0±0.5cm). Height adjustment should be provided in Aluminum structure of armrest which shouldbe connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top should bemade up of PU molded over plastic inner 5. ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features: • 360° revolving type • Frontpivotfor tilt with feet resting on ground & continuous lumber support ensuring more comfort • Tilt tension adjustment can be operated in seating position • 5 position Tilt limiter giving option ofvariable tilt angle to the chair • Seat / back tilting ratio of 1:2 • The mechanism housing should be made up of HPDC Aluminum & black powder coated (DFT 40 to 60 micron) 6. LUMBARSUPPORT ASSEMBLY: The Lumbar support assembly should consist of lumbar spine (material-Glass Fiber Filled Nylon) which should be fixed to Aluminum Back spine. The Lumbar pad(material- Poly Propylene) should be fixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 5.0±0.5cm 6. AUTO-RETURN mechanism(3002AC): The Conference room chair has an Auto-return mechanism to allow the user free movement while being seated and after use guides the upper structure to rotate back to its originalposition enabling all chairs around the table to be aligned. 7. PEDESTAL ASSEMBLY WITH GLIDES (3002AC): The pedestal should be High Pressure Die cast polished hed Aluminium andfitted with 5 nos. fixed glides. The pedestal should be 65.0 ± 0.5cm.pitch-center dia.(70.5 ± 1.0cm. With glides.) 8. GLIDES (3002AC): The glides should be injection moulded in Black PP andassembled to Aluminum pedestal. |
| 35 | SITC of Interactice Flat Panel : Size-86\\" ViewsonicMAKE - VIEWSONIC |
| 36 | SITC of Interactive Panel Type: Active Matrix Color TFT backlit LED; Display Size: 21” or higher; Resolution: 1920 x 1080 pixels; Lines Per Inch: 4000 lpi; Contrast: 1000:1; Input: HDMI In ; Technology: Electromagnetic - with Pen touch only; Interface: USB; Pressure Sensitivity: 2048 Levels; Data Report: 180 reports / per second; Accuracy: ±0.5mm; OS: Windows / Vista / Mac / Linux; Software Feature: Should be able to Annotate on Blank and Power Point application with other application of Windows too. MAKE - ATDSC |
| 37 | SITC of PTZ Camera ; USB based : Yes; Zoom : Minimum 20X Optical Zoom; Iris: f=5.57~110mm ; F1.6 ~ F3.5;Viewing Angle:3.3° (tele) –54.7° Wide ;Sensor:1 /2.8inch or better CMOS sensor; Pixels:2.07 Mega Pixel ; Video Format: SDI Video Formats: 1080P60/50/30/25/59.94/29.97 ; 1080I60/50/59.94. 720P / 50/ 30 / 25 /59.94/29.97; Minimum illiumination:0.5 Lux ; DNR:2D & 3D DNR; White Balance :Auto/Manual/One push 3000K / 3500K / 4000K / 4500K / 5000K / 5500K / 6000K / 6500K /7000K; Electronic Shutter : Auto/Manual; Focus : Should be Auto/Manual/One Push; BLC:ON/Off; WDR : Off/Dynamic level adjustment; Video Adjustment: Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve; SNR : >55 dB; Interface:: USB 3.0 x1, DVi/HDMI x1, , LAN x1, RS232 x1; Video Compression Format:H.265/H.264 ; Control Protocol: VISCA/PELCO-D/Pelco-P; Baud Rate : 11520 / 9600 / 4800 / 2400 ; LAN Port :Yes; Network Protocol: RTSP/RTMP/ ONVIF, GB/T28181; Pan Rotation:+ 170° Tilt Rotation :-30°~+90° ; Pan Control Speed: 0.1~100°/second ;Tilt Control Speed : 0.1~45°/second ;Preset Speed: Pan: 100°/second, Tilt 45°/second ;Preset Number:255 preset MAKE - ATDSC |
| 38 | SITC of Ceiling mount for Camera |
| 39 | Supply, Installation, Testing and Commissioning of Camera switcher : It should be dual channel video switcher mixer for the streaming generation, mini-pro features four resolution independent inputs – three up to 2K and one up to full 4K@60 to take advantage of native high-performance sources, whether cameras or laptops, without compromising on quality; It should have presets for PIP and PBP , it should also include full pixel-to-pixel scaling capabilities for both the PIP and background video layers ; It should have Audio for output should be selectable from embed ,It should have built-in LCD display just not to only shows video preview, but it should be touch enabled for day to day operation of features and settings. ; It should have features including dynamic output control, preview multi-view, picture in picture, Chroma Key, video transitions, on board PTZ camera controls etc.; Stream : It should have superspeed USB3.0 streaming in which just by connecting the device to a laptop or other device it should stream quickly and easily to various social media and streaming platforms as well as a vast array of popular collaboration applications.; Go Live : It should be able to display local and live with the 2K HDMI output port – which should be used for a preview or the live program output. It should be more than a streaming switcher and should also be a live event switcher; Record: It should be able to from dedicated USB port to capture, record video and audio directly from the device with any portable HDD up to 2TB.; Control : It should have on board control for PTZ cameras directly within the device. It should save attribute views of cameras for recall at the touch of a button.; Preview : It should be able showcase all sources live immediately in the builtin LCD display. It should have the facility to get connected to a video output and should display a multi-view preview to always see the next preset before going live.; Mix : It should have transition and switch between live video program and preset. It should be able to recall saved preset views along with scaled video layers. |
| 40 | SITC of Boundary Layer Chairman Unit Microphone: Frequency Response: 40Hz-16KHz; Sensitivity: -44 dB:2dB ; Polar Pattern : Cardioid; ; Supports Discussion & Video; Chairman Base Unit should have Talk button along with Priority Button; Chairman Unit should have two LED lights and it should glow as per the button pressed. Connectivity : Daisy Chain connection with Loop In Loop Out; Connection : 6 Pin; Base indicate : Led Light.Boundary Layer Chairman Unit Microphone- ATDSC 100CUBL - MAKE - ATDSC |
| 41 | SITC of Boundary Layer Delegate Unit Microphone: Frequency Response: 40Hz-16KHz; Sensitivity: -44 dB:2dB ; Polar Pattern : Cardioid; ; Supports Discussion & Video; Delegate Base Unit should have Talk button; It should have LED light and it should glow as per the button pressed. Connectivity : Daisy Chain connection with Loop In Loop Out; Connection : 6 Pin; Base indicate : Led Light. MAKE - ATDSC |
| 42 | SITC of Audio Controller : The main unit of the portable digital conference system can support 60 units of Chairman & Delegate microphone. ; It support 250 Microphones with extension power unit.; Equipped with four groups or 8p-DIN interface for system connecting.; Modes : Discuss mode, Free mode, FIFO mode (1-9),Limit mode (1-9) ; 9 Microphones can be on at a time. First In First Out ; The working mode is displayed on LCD screen. ; Look At Me – Speaker tracking compatible with camera and processor; Connection: 8PIN x 3 plugs for Microphone ; 8 PIN x1 socket for system connection; RCA : 4 x RCA Port; RJ 45 x 1; XLR Port x 1MAKE - ATDSC |
| 43 | SITC of integrated Look At Me Processor with Audio controller :Integrated Look At Me controller-Should have Built-in video switching matrix having 4 HDMI inputs& 1 HDMI output. , Should have 256 video camera auto-track control points, Should support Multi-machine cascade. It should support Pelco-D and VISCA protocol (Pelco-D, Baud Rate: 9600, VISCA, Baud Rate: 9600). , The processor should communicate with the equipment by RS232 interface, with computer or video switching matrix. It should support High speed shifting with the camera which shall follow the location for last opening of all speaking representative, when the microphone which opened last was closed, the camera should follow back the last following spot, and when all the microphone are closed, the camera should automatically moves back to the standby position. When its working without the computer, it can be set through the controller itself with the button on board, and should also set by the IR controller. It should consist of power switch, Camera number selecting button (VIDICON 1-8), Send the camera output to the related display screen through pressing this button, Processor power indicative lamp, , Busy indicative lamp, Camera selecting indicative lamp, Camera zoom setting, Camera direction set button (up, down, left, right), Save button (save the pre-setting spot), USB connection interface to PC, and for connecting to another video matrix, Should have the port to connect it computer to setup the software function. It should control pan and tilt move directly from software., It should have Data port to connect to the main conference unit, These inputs should get connected with the camera and should support 4 cameras. Should have HDMI Out to show camera output directly to a display Integrated Processor with Controller for -ATDSC 1000 CMU Look At Me MAKE - ATDSC |
| 44 | SITC of Echo Suppressor: Echo suppressor should eliminate feedback sound and noises. It should Each microphone channel should have phantom power switch independently. It should protect the speaker and other audio equipment effectively.Should have Power supply: AC220~230V,50/60Hz; Should have Independent microphone and line input switch; Should have EFX port support connecting to conference system; Should have Frequency shift: 5Hz±1Hz or better; Should have Input impedance: ≥5KΩ or better ; Should have Output impedance: ≤600Ω or better; Should have Microphone Gain: 5~14dB or better; Should have Frequency response: 20Hz-20 KHz in Feedback Off state, 150Hz-15 KHz in Feedback On state or better;Front panel should have Power Switch x 1; Feedback OFF state indicator lamp x 1;Feedback function ON/OFF switch x 1; Feedback ON state indicator lamp; Rear Panel should have : GND lift x 1; Line audio output x 1; Line audio input x1; Conference EXF audio output x1; Conference EXF audio input x1; Mix Output x 1; Balance Audio output x 1; Microphone audio unbalance input x 1; Microphone audio unbalance input x 1; Power Socket x 1ATDSC Echo Surpressor - MAKE - ATDSC |
| 45 | SITC of Power Extenshion for Microphone |
| 46 | SITC of Wall mount Speaker: Power Tap: 5W/10W/20W/OFF-8ohm,Power at 8ohm, 30W;Peak Power: 60W,SPL@1M: 89±2db, Max SPL@1M: 104db, Frequency Response: 100-20KHz,Dispersion Angle: Vertical : 80° and Horizontal:100° (1KHz),Enclosure Material : PP Enclosure and 360-degree metal mounting bracket, Speaker 4.25” weatherproof woofer and 1” silk tweeter.Wall Mount Speaker- ATDSC WM130 30 watt - MAKE - ATDSC |
| 47 | SITC of Amplifier: Power Output 550W Max., 500W RMS at 10% THD, 440W RMS at 5% THD, Output Regulation 2 dB, no load to full load at 1kHz, Input Channels 7 X Mic. 0.65mV/4.7k Ohms , 2 X Aux 100mV/470k Ohms, Frequency Response 50-15,000Hz ±3dB, Signal to Noise Ratio 60dB , Tone Controls Bass ±10dB at 100Hz, Treble±10dB at 10KHz, Outputs Line: 200mV/600 Ohms, 1V/1k Ohms, Speaker Output 4 Ohms, 8 Ohms & 100V, Digital Player MP3 Player with USB, SD Card & Bluetooth, Power Supply AC: 220-240V 50/60Hz , DC: 12V, Power Consumption : AC : 250VA DC : 4A, Power Consumption AC : 250VA DC : 4A, Consist of USB Pen drive Port, SD Card Plug and Play, Compatible with Radio & Bluetooth, EQ & Recording, 7 Channels Microphone Inputs, 2 Channels Aux Inputs, 1 Channel Line Output. 100V Constant Voltage Output and 4Ω\ 8 Ω \16 Ω Resistance Output.Amplifier- ATDSC PA 500 watt MAKE - ATDSC |
| 48 | SITC of Digital signal processor : Should have Double Core chip having 456MHz or better; Should have Microphone Inputs x 04 or more; Should have Microphone / Line outputs x 04 or more ; Should have Input processing’s with Preamp, Signal Generator, Expander, Compressor, 5-band parametric equalisation, Auto gain, AM auto mix function, AFC Adaptive Feedback Cancellation; Should have Output processing with Speaker management having 31-band graphic equaliser, delay, crossover, limiter, high and low channel filters; Should have Matrix Mixing of input and output signals, mixing component control or better; Should have Automatic Mixing Console ; Should have AFC Auto feedback elimination; Should have Auto Echo cancellation; Should have Auto Noise Cancellation module; Should have Automatic mixing console, Ducker, or better, Should have built-in USB as Microphone in and Audio out for Software based VC as well as for recording the conference and playing digital audio, Should have camera tracking for Look At Me / Speaker tracking, Should have minimum 8 GPIO ports free to configurable as required.; Should have Central Control Command Cet Generator ; Should have Sampling rate of 48Khz or better, Frequency response of 20Hz – 20Khz + 0.2dB or better, Should have input gain amplification of -24～27dB 3dB,Level 1 with minimum 7 levels or better; Should have background noise -90dBu or better ; Should have THD+N ≦0.004% @4dBu or better ; Should have Automatic power failure protection memory function; Should have per channel phantom power 48V module or better. ; Should have software which should be configurable PC and also through Mobile devices like Smart phones, Tablet etc. Should have password facility to avoid misuse having separate password for the admin and separate for users. Should have facility to save the different setting done in a file upto 100 or more settings. ; Should have Ethernet Port RJ 45 x 1; Should have RS 232 x 1; Should have RS 485 x 1.ATDSC Digital Signal Processor 404 - 4 In & 4 Out, USB Port for soft VC - MAKE - ATDSC |
| 49 | SITC of Distribution Amplifier:1 HDMI In 8 HDMI Out. MAKE - ATDSC |
| 50 | SITC of HDMI Extender:Transmitter & Receiver connected on Cat6 cable, Supports Upto 50 Mtr, Full HD MAKE - ATDSC |
| 51 | SITC of Rack 17U |
| 52 | SITC of High End PC - i7 12th Gen, 16GB RAM,1 TB SSD,Windows 11 - MAKE HP/Dell/Lenevo |
| 53 | 19. Providing & Laying Cable & Connectors for Installation. Including All type Cable & Connectors |
| 54 | SITC of Cable cubby ATDSC cable cubby with 2X power plug, 1X HDMI, 2X USB, 1X RJ 45 |
| 55 | SITC of Switcher 4 HDMI in X 1 HDMI out |
| 56 | SITC of USB Switcher 4 USB in X 4 USB out |
| 57 | SITC of USB HUB |
| 58 | SEMINAR HALL:WALL PANELING & FALSE CEILING Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete forall heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.Armstrong/GyprocD.S.R. Item No. 12.52.2 |
| 59 | Providing and installation of acoustical wall panelling wood finish Slats made out of MDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), backlined with black acoustical fleece, tongue-groove edge for a seamless look, FR grade, of lineal dimension size 128mm x 2440mm x 16mm thick having density 1000Kg /m3, weight12.8Kgs/m2 installed by using GI strut system. The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centers. Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts both ways. Make. Armstrong / Sant GobainAs per Ref. BOQ Item No. 1.27 |
| 60 | Providing and fixing in Auditorium Flooring and Steps - Woven vinyl carpet floorings of vinyl woven series with roll dimensions of 1.8/2mtr meters width and length of 20 meters or Tiles size as per company standard should be approved by architect. 2.50-2.80 mm thickness to laid on hard, levelled, smooth and moisture free sub floor. Woven Vinyl flooring should have traffic classification 33 and weight of 2.7-3.5 kg/m2. Flooring should have caster chair EN-985 tested with color fastness of more than 6. It should be ASTME662 qualified on Smoke density test. Product must be fire rating of the product should be Bfl-S1. Any Joints in flooring rolls should be sealed with cold welding. This work will be inclusive of all Labour, Raw Material, Hardware, adhesive etc. complete. Carpet will be provided as per approved shade and colour in Approved Makes- Vibrant Floors/Armstrong Flooring/MAC ,as per the satisfaction of the Architect and Engg. Incharge.Market Rate |
| 61 | 2\\" thick Slotted Wood Finish Wall Panel system on Masonry: Providing and fixing wall panelling on existing masonry with 50mm x 50mm Aluminium section framework of size 600mmx600mm grids and filled with acoustical insulation of 50 mm thickness 1000 gsm density from Star Insulation or Prime Insulation. The framework and acoustical infill is to be concealed behind the 15mm Slotted finish fire rated wood finish MDF panels from Topakustik, Wood Fit, Armstrong, Sound Slats, RPG or equivalent approved vendors. The perforated wood finish panels must have a minimum perforation area of 12% or higher and is to be supplied with black RP Tissue or equivalent of approved quality. This should be completed as per details and diagrams provided. Rate shall be inclusive of installation on the frame work arrangements. Works will be inclusive of scaffolding and staging at all levels. Rate shall include the preparation of detailed shop drawings as per site conditions, which shall be approved beforecommencement of worksAs per Ref. BOQ Item No. 1.26 |
| 62 | ACOUSTIC DOOR WITH CHOWKHAT FOR DOOR OPENING SIZE 1.50M X 2.1M:Providing, Supplying, Installation, Testing and fixing in position a 65 mm thick acoustic door with chowkhat. Door should have a 150 mm x 300 mm vision panel of6.0 mm thick toughened glass. Both Shutters shall be made with 100mm x 50mm thick hardwood outer frame with 50 mm x 50 mm hardwood ribs at 500 mm c/cbothways. All woodwork shall be treated with anti-termite treatment. The door shutter shall have 6 mm thick BWP grade plywood fixed on its both sides. All the cavities inside the door shall be filled with high NRC acoustic insulation materials (rockwook of 60 kg/m3 density) Insides of the door will be lined with 3mm thick MLV Sheet of minimum 1700 kg/m3 density. Periphery of the the shutter shall be covered with 12mm thick teakwood lipping matching with the door frame. The external faces of the door shutter will be finished with 1mm thick laminate on both sides. Teakwood lipping will be melamine polished. Weather seal of Rehau make shall be fixed on the door frame to fill the gap of shutter and wooden frame. Drop down seal to be fixed in shutter to block the gap with floor when the door is closed. The cost shall include all hardware fittings like heavy duty SS Hinges ( 4inch long - 5 per door) , 1ft long D type SS 304 Handles of Godrej/Hettich/Dorma make ( both inside and outside).As per Ref. BOQ Item No. 1.19 |
| 63 | Providing and fixing Godrej Kaditala 275 mm ChromeAs per Ref. BOQ Item No. 1.20 |
| 64 | Providing and fixing hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, for door weight upto 80 kg to 100 kg and door width from 750 mm to 900 mm), with double speed adjustment with necessary accessories and screws etc. complete.Godrej/Ozone/HettichAs per Ref. BOQ Item No. 1.21 |
| 65 | Providing and Supplying factory made Podium table 8ft long x 2ft deep x 2.5ft high made with 25mm thick prelaminated HDF Board (all full round edges) with full Vanity panel on three sides and 3 internal vertical division panels of 1ft x 2.5ft for seating 3 persons on the TABLE. The design and color of the table will be as approved by the authorities.The table will have provision for fixing electrical points.The table will have provision for 8 Way LEGRAND POP-UP Box forDATA/HDMI/ELEC. points. As per Ref. BOQ Item No. 3.02 |
| 66 | Providing and Supplying Podium Chairs ( Mid Back without wheels) of design and color approved by college authorities (Godrej/ Featherlite/ Geeken Make)As per Ref. BOQ Item No. 3.03 |
| 67 | Providing and Fixing PVC Wall Paneling with all complete fitting Armstrong/gyprocMarket Rate |
| 68 | Supplying of following LED fitting on recess/surface made of metallic CRCA powder coated steel / aluminium body, minimum system efficacy 100 Lumens/watt. Electronic in buit driver, PF>0.9, suitable for 220V-240V 50Hz A.C. supply, in the existing false ceiling with S.S. chain hanging arrangements/ on surface as per site condition including making connections with 3x1.5sq.mm FRLS copper conductor cable in steel flexible pipe, testing and commissioning etc. required.SITC of Step light Colour: Anthracite grey Material Aluminum Dimensions 201 x 91 x 35 Lamp Base LED Integrated Wattage 5W Make : Bajaj/Go GreenAs per Ref. BOQ Item No. 2.26 |
| 69 | Supplying of following dimmable LED fitting on recess/surface made of metallic CRCA powder coated steel / aluminium body, minimum system efficacy 100 Lumens/watt. Electronic in buit driver, PF>0.9, suitable for 220V-240V 50Hz A.C. supply, in the existing false ceiling with S.S. chain hanging arrangements/ on surface as per site condition including making connections with 3x1.5sq.mm FRLS copper conductor cable in steel flexible pipe, testing and commissioning etc. required. SITC of Recessed mounted 24 watt LED down lighter made up of high pressure die cast aluminium housing complete as required. (Equivalent to Lighting Technologies,Make : Bajaj/Go Green ) As per Ref. BOQ Item No. 2.25 |
| 70 | Supplying of following LED fitting on recess/surface made of metallic CRCA powder coated steel / aluminium body, minimum system efficacy 100 Lumens/watt. Electronic in buit driver, PF>0.9, suitable for 220V-240V 50Hz A.C. supply, in the existing false ceiling with S.S. chain hanging arrangements/ on surface as per site condition including making connections with 3x1.5sq.mm FRLS copper conductor cable in steel flexible pipe, testing and commissioning etc. required. Supply of 1200 mm long 20 watt LED luminiare (Make : Bajaj/Go Green)As per Ref. BOQ Item No. 2.27 |
| 71 | Installation, Testing and Commissioning of BAJAJ single LED Signage BESL 03 LED SSD WBB GREEN above the exit doors of the auditorium including providing fixingneccassry base plate , point wiring, fitting fixture etc. complete.Make : Bajaj/Go GreenAs per Ref. BOQ Item No. 2.28 |
| 72 | Supply installation testing of LEGRAND 8 WAY Conference Table POP UP BOX, with power , Lan , HDMI, Audio ,CGA & USB including all necessary associatedhardware .As per Ref. BOQ Item No. 2.29 Please Enable Macros to View BoQ information |
