|
| 1 | [13.27]Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. [Through Rate] |
| 2 | [13.32]Providing and fixing bolts including nuts and washers complete. [Through Rate] |
| 3 | [23.22.1.10]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.10. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 125 to 160 amp, 25 KA [Through Rate] |
| 4 | [23.22.5.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.2. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. Single Pole [Through Rate] |
| 5 | [23.26.2]SAFETY ITEMS 2. Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages. [Through Rate] |
| 6 | [23.27.2]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 2. M.S. pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 0 0 [Through Rate] |
| 7 | [24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate] |
| 8 | [24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate] |
| 9 | [24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate] |
| 10 | [24.2.8.14]LT CABLE 8.14. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work.300 sqmm [Through Rate] |
| 11 | [24.2.8.4]LT CABLE 8.4. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 16 sqmm [Through Rate] |
| 12 | [24.3.4.2]HT CABLE 4.2. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 150 to 185 sqmm [Through Rate] |
| 13 | [24.4.15.1]STREET LIGHT 15.1. B.S.E.N. 10025 High Masts \\"Supply, installation, testing and commissioning of 12.5 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 6 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-ChargeThickness of Top and Bottom Section = 3 mm (minimum)Top Dia = 150 mm and Bottom Dia = 360mmThickness of Galvanization - Top = 65 micron (minimum) and Bottom = 85 micron (minimum)\\" [Through Rate] |
| 14 | [24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia [Through Rate] |
| 15 | [24.9.1]RCC FOUNDATIONS FOR HIGH MAST OCTAGONAL POLES 1. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 12.5 m high mast pole [Through Rate] |
| 16 | S/E of 300mm2 single core aluminium conductor PVC insulated cable as per ISS: 1554/P-I completes in all respect up-to the entire satisfaction of E-I-C. Make:- Polycab/Havells/ Grandlay |
| 17 | S/E of wooden cleats having 4 Nos. grooves for 300 Sqmm single core cable with Nut and bolts with all petty material up-to the entire satisfaction of E-I-C. |
| 18 | S/E of PVC unsheathed aluminum conductor cable single core 1100 volts grade in pipe of size 50 Sqmm excluding cost and erection of pipe. |
| 19 | Supply and erection of 11 KV Anti Climbing Device for 11/33 KV Line (with barbed wire 12 x 12 Gauge on existing PCC Pole complete in all respect upto the entire satisfaction of Engineer-in-Charge. |
| 20 | S/E of 11 mtr long PCC pole as per IS: 1678-1960 specifications, Dimensions 140mm x 200mm at top and 140mm x 400mm at bottom with working load of 400 Kg buried 2.20 m in ground or as per UHBVNL Specification. |
| 21 | S/E of V-shape cross arm made of channel iron 75mm x40mm x40mm x6mm (Total weight–10.1 Kg.) for 11 KV over head line conductors complete with 50mm x 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc. |
| 22 | S/E of top hamper suitable for 11 mtr. long PCC pole and 11KV system made out of MS flat size 50x6mm (U-shaped) having approx weight 2.5 kg as per approved design and drawing including primer and alum paint complete all respect. |
| 23 | S/E of 11 KV pin insulator polymeric type with 11 KV G.I. pin complete set on PCC pole of Make: Rashtriya/ approved by state Electricity Nigam, conforming to IS: Part-II 1974 and IS: 2486 Part-I of 100mm GI pin to hold the insulator of 100mm GI pin to hold the insulator complete in all respect. |
| 24 | S/E of stay set for HT Line complete in all respect with stay wire Disc insulator comprising M.S. rod of 20mm dia 8’ long with stand 1000 Kg. load and threaded upto 250mm long with cross channel of size 450mm x 450mm made out of M.S. Channel 75x40mmx6mmx6mm up-to the entire satisfaction to E-I-C. |
| 25 | S/E of 100mm2 ACSR conductor conforming to IS 398 ( Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments and erection of the same with accessories including stringing and sagging of conductor as well as jointing and binding with insulator at supports in all respect. |
| 26 | Supply stringing sagging 8 SWG G.I. earth wire as per complete in all respect to the entire satisfaction of Engineer-in-Charge conforming to IS 298/1978 and 7807/1973 and with latest amendment thereof. |
| 27 | S/E of cradle guards made of 8 S.W.G. G.I. wire for HT line complete in all respect. |
| 28 | S/E of 9 mtr long PCC pole as per IS:1678-1960 specifications. Dimensions 105mmx115 mm at top and 105 mm x315 mm at bottom with working load of 200 Kg, buried 1.80m in ground or as per UHBVNL Specification. |
| 29 | Supplying and erection of M.S.D-Strap iron clamps as per UHBVN design and specifications complete as required. |
| 30 | Supplying and erection of shackle insulator 75mm x 90mm as per UHBVN Specifications as required. |
| 31 | Supply and erection of stay set for L.T. Line complete in all respect with stay wire egg insulator comprising M.S. rod of 20mm dia 8` long with stand 1000 Kg. load and threaded upto 250mm long with cross channel of size 450mm x 450mm made out of M.S. Channel 75x40mmx 6mmx6mm upto the entire satisfaction to Engineer-in-Charge of the work. |
| 32 | S/E of 80mm² ACSR conductor conforming to IS 398 ( Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments and erection of the same with accessories including stringing and sagging of conductor as well as jointing and binding with insulator at supports in all respect up to the entire satisfaction of Engineer-in-Charge. |
| 33 | Supply and erection of PVC insulated 30 Sqmm ACSR of approved make on existing PCC Poles complete in all respect upto the entire satisfaction of Engineer-in-charge. |
| 34 | Supply and erection of guard for L.T. line with guard real complete in all respect up to the entire satisfaction of Engineer-in-Charge. |
| 35 | Supply, erection, testing and commissioning of L.T. Arial Bunched cable 120 Sqmm x 4C plus 95 Sqmm x1 core messenger wire P.V.C. sheathed on existing PCC pole, Conforming to IS standard and with latest amendments there to complete in all respect upto the entire satisfaction of Engineer-in-charge. Make: Polycab/Havell’s /Grandlay |
| 36 | S/E of PVC insulated and sheathed two or core cable 1100 Volt, each core having single solid aluminum conductor cables as per IS: 694, complete with necessary connections. Make: Grandlay, Polycab, Havel’s2.5 Sq mm x 3 Core Cable(Un-armd.) |
| 37 | Supply and erection of G.I. Pipe bracket 1.00 Mtr. long, made of 32 mm dia G.I. pipe (B-Class) Jindal Hisar Make suitable for street light fitting including 2 Nos. M.S. Clamps of M.S. Flat size 50x6mm, 06 Nos. Nut and Bolts of size 50x16mm and priming and painting complete in all respect upto the entire satisfaction of E-I-C. |
| 38 | Supply, erection, testing and commissioning of ELEX-TWS-2EXT / Amson’s/LandT make Automatic electric timer to switch ON/OFF the street light automatically. It should have adjustable lux level switch, with extensible mountable sensor. It shall change ON/OFF timing automatically as per lux level of the Sun at sun-rising and sun setting, throughout the year. Shall have two Nos. LandT make, 3 pole power contactor model MNX-70 to control 70 amp per phase with 220 Volt coils. It shall have auto/manual switch for repair of street light during day time. The whole unit components to be assembled on Bakelite sheet with 16 amp capacity MCB to save the time switch. The erection of the complete unit in the existing pedestal with complete wiring upto the entire satisfaction of the Engineer-in-charge. |
| 39 | S/E of Three Phase 11KV/ 0.433KV-250v, 200 KVA, Oil immersed, naturally cooled, Aluminium Wound Outdoor type Distribution Transformers with CSP (Completely self protected) features with external microprocessor based MCCB, strictly conforming to Nigam’s Technical specification No. CSC-V/R-I/DH/UH/P and D/2010-2011 read with amendment thereof and as per relevant ISS as amended from time to time and losses confirming to 4 star rating of BEE as per App. Make and specification of DHBVN/UHBVN including making of platform and installation of transformer up-to the entire satisfaction of E-I-C.Voltage Rated Frequency permitted at 75º Ci) Maximum load losses at 50% load at 75º C = 780 Wattii) Maximum losses at 100% load at 75º C = 2300 Wattiii) Warranty = 78/72 Months shall be one time.The above losses are maximum allowable and these would not be any positive tolerance. |
| 40 | S/E of fuse unit L.T. side of 200 KVA transformers complete with wooden board cleats, aluminum strips MS clamps and MS nut and bolts including all petty material required up to the entire satisfaction of Engineer-in-Charge |
| 41 | S/E of 11 KV G.O. switch with 9 Nos. Post insulator suitable heavy duty with suitable copper male and female contents for 11 KV conforming to ISS: 1816/1972 and ISS : 2544/ 1963 with latest amendment thereof complete in all respect. |
| 42 | S/E of 11 KV lightening arrestor S/Stn type 9 KV 10 KA heavy duty type complete with MS nut and bolts including all petty material required upto the entire satisfaction of E-I-C. |
| 43 | S/E of 11 KV pin insulator polymeric type with 11 KV G.I. pin complete set on PCC pole of Make: Rashtriya/approved by state Electricity Nigam, conforming to IS: Part-II 1974 and IS: 2486 Part-I of 100mm GI pin to hold the insulator of 100mm GI pin to hold the insulator complete in all respect upto the entire satisfaction of E-I-C. |
| 44 | S/E of stay set for HT Line complete in all respect with stay wire Disc insulator comprising M.S. rod of 20mm dia 8’ long with stand 1000 Kg. load and threaded upto 250mm long with cross channel of size 450mm x 450mm made out of M.S. Channel 75x40mmx6mmx6mm up-to the entire satisfaction to E-I-C |
| 45 | Supply and erection of P.G. clamp Al cast 2 bolt suitable for 100mm2 ACSR conductor (DOG) complete in all respect. |
| 46 | Supply and erection of 200 watt LED flood light luminaire with multiple highly efficient and high power LED light with individual lens, pressure die cast aluminium housing with heat sink and aluminium extrusion, with secondary optics and enclosed with toughened glass, IP-66 level, having more than 120 lumens/watt, with 3 years defect liability period (on site replacement) free of cost, complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. Make: Philips, Bajaj, LT |
| 47 | S/E of underground cable, loose in existing pipe or trenches complete with necessary connections. Make: Grandlay, Polycab, Havel’s16 Sq. mm 4 Core Cable (Armd.) |
| 48 | Suppply and erection of FRLS PVC insulated and sheathed round 2.5 sqmm 3 core bright annealed copper conductor heavy duty industrial flexible cable for voltage 1100 grade confirming to is 694: complete in all respect upto entire satisfaction of engineer- in charge of work. Make- Havells/Polycab/Grandlay |
| 49 | Supply and erection 11 KV XLPE H.T. cable, stranded compacted circular Aluminum conductor, screened with extruded semi conducting compounded, XLPE insulated, galvanized steel flat screen armored and overall PVC sheathed cable confirming to IS7098 (Part-2) 2011 with upto date amendments, loose in existing pipe or trenches including making necessary connections complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work. 185 sqmm, 3core XLPE cableMake:- Havell’s, Polycab, Grandlay |
| 50 | S/E of cable holding clamp made out with two pieces of best quality of wood, suitable for HT 11 KV XLPE cable of size 185 sq mm x 3 core complete with cutting of wood of suitable size i.e size of one half clamp should be 50 mm width x300mm long x 100 mm high, complete with making grove of suitable size for cable 185 sqmm x 3 core complete with nut and bolt of suitable size and primer and paint complete in all respect. |
| 51 | S/E of 70/72Watt LED street light luminaries with multiple LED with highly efficient high power LED light with lens, pressure die cast housing, reflector and enclosed with toughened glass, and IP-66 level, having light efficacy 120 lumen/watt up to the entire satisfaction of Engineer in charge of the work. Make – Bajaj / Phllips/ LT ( with 3 years free replacement warranty at site including labour charges free of cost) |
| 52 | Only labour charges for ON/OFF operation of street light points of all type of LED Lights, Removal of Fault of circuits, Dismantlement and re-erection of LED fitting from S/L poles for LED lights under defect liability period .For 2nd Year |
| 53 | Only labour charges for ON/OFF operation of street light points of all type of LED Lights, Removal of Fault of circuits, Dismantlement and re-erection of LED fitting from S/L poles for LED lights under defect liability period .For 3rd year. Please Enable Macros to View BoQ information |
