|
| 1 | Hand pump with soak pit |
| 2 | Construction of tube well from ground level and up to 100 mtr. depth and above of following sizes in all types of soils in alluvium strata, unconsolidated formation such as pebbles, boulders etc. by bailing method and without gravel packing as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work includes formation of cavity at bottom by development with appropriate air compressor or bailer pumping and also lowering of casing pipe but excluding cost of the casing pipe. The tube well should have a throughout bore as per nominal dia of casing pipe. The work would be completed after obtaining sand free water. |
| 3 | 125 mm nominal bore |
| 4 | Supply of isi marked UPVC pipe class 15 manufactured by MSZZA process IS 1592 as per specification and aproved make. |
| 5 | 125 mm nominal bore |
| 6 | Supply of india mark II hand pump set complete ISI marked with cylinder & ten conncting rods etc. ISI mark. |
| 7 | Supply & installing of 32 mm dia G.I.Pipe medium class ISI marked in 3 metre length including all accessories & fittings required for installation of hand pump. |
| 8 | supply of extra connecting rod for IM II H.P. hand pump as per department. Specification in 3 meter length. |
| 9 | Installation of india mark II hand pump set complete & fixing of 120 cm dia precast RCC platform choki nad nali preparing base C.C. 1:4:8 50 mm thick comlete in all respect. (precast R.C.C. plateform, choki and nali will be supplyed by the department) |
| 10 | ;kstuk cksMZ o QksVks |
| 11 | DEEP BORE |
| 12 | Construction of tube well from ground level and up to 100 mtr depth and above to accommodate housing assembly pipe in all type of unconsolidated formation such as pebbles, boulders, collapsible formation etc. by Odex drilling method as per IS: IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work will include lowering of housing and strainer pipe assembly and casing shoe including cost of casing shoe, but excluding cost of the casing pipe. The work would be completed after obtaining sand free water. |
| 13 | Nominal bore 125 mm dia. |
| 14 | Supply of isi marked AC pipe class 15 manufactured by MSZZA process IS 1592 as per specification and aproved make. |
| 15 | 125 mm Dia Nominal bore. |
| 16 | Labour charges for making slots / Holes on AC pipe size & nos. as per EIC |
| 17 | 125 mm Nominal bore. |
| 18 | Supply & Installation of single phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of followingduty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board,testing of submersible pump set and interconnection up to water mains, complete in all respect Up to 2.0 KW |
| 19 | Supply and Fixing of Electric feeder panel (having projected canopy)for submersible pump set Single phase up to 5 HP, comprising of DOL Starter, MCB, Indicating Light, Ammeter, Volt meter, connection plate, condensers of approved make and the panel enclosure should be made out from 18 gaugeM.S. Sheet with powder coating. Panel size Height 600 mm Width 500 mm depth 250 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The operation of panel should be suitable for on 240 Volt AC Supply. |
| 20 | Providing & Lowering in tube well ISI marked HDPE pipe as per IS 4984:1995 or amended up to date in PE 80 grade class PN 10 of following dia. including HDPE/GI fittings and PVC rope confirming to IS 5175:1992 or amended up to date, along with clamping of submersible cable etc. complete in all respect. |
| 21 | 40mm OD (32mm ID) |
| 22 | Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098 I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. |
| 23 | 10.0 Sq.mm, 4 core Please Enable Macros to View BoQ information |
