|
| 1 | TABLE DINING 4 PERS: FD/MAP-II/03:Removing old unserviceable Top of Table Dining 4 pers and S&F new top complete of size 1200mmx900mm made of 18mm thick plywood BWR Gde of Make : kit ply/ Green Ply/century ply Ply covered with laminate sheet of approved shade of Make: kit ply/century ply with 4mm thick teakwood bidding of semi round shape all round the top of table. Complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 2 | Removing old unserviceable long rail of Table Dining 4 pers and S&F well seasoned teak wood new long rail of size 45mmx90mmx1200mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 3 | Removing old unserviceable short rail ofTable Dining 4 pers and S&F well seasoned teak wood new short rail of size 45mmx90mmx900mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 4 | Removing old unserviceable legs of Table Dining 4 pers and S&F well seasoned teak wood new leg of size 90mmx45mmx750mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 5 | Removing old unserviceable PVC rings ofTable Dining 4 pers' and S&F new PVC rings of size 25mm dia best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 6 | Removing old unserviceable wooden brackets of Table Dining 4 pers and S&F well seasoned teak wood new brackets of 100mmx100mmx35mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 7 | Removing old unserviceable wooden stiffner of Table Dining 4 pers and S&F well seasoned teak wood new stiffner of 90mmx25mmx900mm complete all as specified and shown on drg and directed by Engineer-in-Charge |
| 8 | M&L for 2 coats of fench polish over a coat of wood primer to new part and 01 coat of french polish of approved shade to entire surface complete to Table Dining 3'x3' complete all as specified and directed by Engineer-in-Charge |
| 9 | TABLE DINING 6 PERSONS: FD/MAP-II/03: Removing old unserviceable Top of Table Dining 6 pers and S&F new top complete of size 1500mmx900mm made of 18mm thick plywood BWR Gde of Make : kit ply/ Green Ply/century plycovered with laminate sheet of approved shade of Make: kit ply/century ply with 4mm thick teakwood bidding of semi round shape all round the top of table. Complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 10 | Removing old unserviceable long rail ofTable Dining 6 pers and S&F well seasoned teak wood new long rail of size 45mmx90mmx1500mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 11 | Removing old unserviceable short rail ofTable Dining 6 pers and S&F well seasoned teak wood new short rail of size 45mmx90mmx900mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 12 | Removing old unserviceable legs of Table Dining 6 pers and S&F well seasoned teak wood new leg of size 90mmx45mmx750mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 13 | Removing old unserviceable PVC rings ofTable Dining 6 pers' and S&F new PVC rings of size 25mm dia best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 14 | Removing old unserviceable wooden brackets of Table Dining 6 pers and S&F well seasoned teak wood new brackets of 100mmx100mmx35mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 15 | Removing old unserviceable wooden stiffner of Table Dining 6 pers and S&F well seasoned teak wood new stiffner of 90mmx25mmx900mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 16 | M&L for 2 coats of french polish Make : Asian /Berger / Nerolac over a coat of wood primer to new part and 01 coat of french polish of approved shade to entire surface complete to Table Dining 3'x3' complete all as specified and directed by Engineer-in-Charge. |
| 17 | TABLE DRESSING GENTS WITH MIRROR: FD/E6/MAP/16: Removing old unserviceable/ broken Looking mirror of Table Dressing Gents and S&F new 5.5mm thick Looking mirror Make of mirrror: Modi Guard /swastik/ Saint Gobin of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 18 | Removing old unserviceable ply back to mirror of Table Dressing Gents and S&F new 12mm thick ply back of Make : ArchidPly/ Green Ply/ century ply to mirror of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 19 | Removing old unserviceable wood frame covered to mirror of Table Dressing Gents and S&F new teak wood frame of existing size, shape alround the mirror incl french polish of approved shade complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 20 | Removing old unserviceable glass shelf of Table Dressing Gents and S&F new 5.5mm thick glass shelf of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 21 | Removing old unserviceable runner /glass holder of Table Dressing Gents and S&F new glass holder for glass shelf of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 22 | Removing old unserviceable ply back of Table Dressing Gents and S&F new 12mm thick commercial ply back of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 23 | Removing old unserviceable sides of Table Dressing Gents and S&F new sides of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 24 | Removing old unserviceable wooden brackets of Table Dressing Gents and S&F new teak wood brackets of size 38mmx112mmx112mm incl french polish of approved shade complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 25 | Removing old unserviceable legs of Table Dressing Gents and S&F new teak wood legs of size 38mmx38mm incl french polish of approved shade complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 26 | Removing old unserviceable hinges of Table Dressing Gents and S&F new piano type continuous hinges of make: Hettich/ Godrej/ Kaff of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 27 | CHAIR DINING: FD/MAP-II/05: Rremoving old broken / unserviceable front legs of chair dining and S&F new Front legs of size 460mmx55mmx30mm all as shown on drg. and as directed . |
| 28 | Removing old broken / unserviceable rear legs of chair dining and S&F new rear legs of size 890mmx55mmx30mm all as shown on drg. and as directed . |
| 29 | Removing old broken / unserviceable front rail of chair dining and S&F new front rail of size 440mmx30mmx65mm all as shown on drg. and as directed . |
| 30 | Removing old broken / unserviceable back rail of chair dining and S&F new back rail of size 405mmx30mmx65mm all as shown on drg. and as directed . |
| 31 | Removing old broken / unserviceable side rail of chair dining and S&F new side rail of size 430mmx30mmx65mm all as shown on drg. and as directed. |
| 32 | Removing old broken / unserviceable TW stiffner of chair dining and S&F new TW stiffner of size 440mmx20mmx25mm all as shown on drg. and as directed . |
| 33 | Removing old broken / unserviceable PVC buffers of chair dining and S&F new PVC buffers of 20mm dia all as shown on drg. and as directed . |
| 34 | M&Lpreparing surfaces and applying two coats french polish to the entire wooden surface of chair dinning complete all as directed. |
| 35 | Removing old broken / unserviceable PVC Seat of chair dining and S&F new PVC seat of size 440mmx430mm , 4mm thick with holes complete all as shown on drg and as directed . |
| 36 | CHAIR DINING (OFFRS MAP)FD/MAP-II/04 : Removing the unserviceable front leg and S&F new teakwood front leg of size 50x35x450mm and complete all as specified and shown on drawing and as directed. |
| 37 | Removing the unserviceable Rear leg and S&F new teakwood rear leg of size 50x35x950mm and complete all as specified and shown on drawing and as directed. |
| 38 | Removing the unserviceable back verticle strips and S&F new teakwood back verticle strips of size 15x30x550mm duly made to shape and complete all as specified and shown on drawing and as directed. |
| 39 | Removing the unserviceable back rail and S&F new teakwood back rail of size 25x90x450mm and complete all as specified and shown on drawing and as directed. |
| 40 | Removing the unserviceable front & side rail and S&F new teakwood front & side rail of size 25x65x450mm and complete all as specified and shown on drawing and as directed. |
| 41 | Removing the unserviceable stiffeners and S&F new teakwood stiffeners of size 20x25x450mm and complete all as specified and shown on drawing and as directed. |
| 42 | Removing the unserviceable seat and supply & fix new seat of size 450x450mm made out of 12mm thick commercial plywood upholstered with 75mm ; 40 density foam cuhion of Make : Curl on/ sleep well/ springwell covered with tapestry cloth of make: D' decor/ Bombaydyeing/ Vivid collection (providing white kora cloth to the bottom of the tapestry cloth) of approved shade by Engg in Charg complete all as specified and shown on drawing and as directed. |
| 43 | Removing the unserviceable PVC ring and S&F new hard PVC ring of 25mm Dia screwed to the legs complete all as specified and shown on drawing and as directed. |
| 44 | Removing the unserviceable teak wood stopper for seat and S&F new teakwood stopper of size 75x75x25mm fixed with main frame and legs complete all as specified and shown on drawing and as directed. |
| 45 | M&L Preparing surfaces and applying two coats of french polishing to repaired chairs duly preparing the old and new surfaces complete all as specified and shown drawing and as directed.Ref Drg No. FD/MAP-II/04 |
| 46 | CHARPOY GI NYLON NEWAR/PLY TOP:FD-220 : Removing of old broken/ unsv nylon newar of charpoy GI pipe and S&F New 12 mm thick BWR grade ply of size 1980mmx900mm as per IS-303 approved specification of ply on cleats welded on rails. S& F 02 Nos new Flat iron strip for each charpoy of size 900mmX30mmX5mm thick as per sample approved duly welded to each charpoy on two long rails togather on appropriate position of cahrpoy with providing new nut & bolts with wahser including providing Edges of Ply should be prepared with putty for moisture resistance. New Flat Iron strip shall be painted with synthetic enemeled paint in black colour over a coat of red oxided primer. Corners of plywood top should be rounded off properly before fixing on charpoy complete all as specified,as shown on drg and directed by Engineer-in- Charge. |
| 47 | S&F 02 Nos cleats of iron angle of size 25mmx25mmx5mm, 50mm long as per sample approved on each long rails and 02 Nos cleats on each short rails duly running welding on approprite position as directed by Engr-in Charge including drilling hole in each cleats duly painted with synthetic enameled paint black colour complete all specified and shown on drawing and directed by Eng-in-Charge. |
| 48 | Removal of old broken/unsv GI elbow three way from existing frame of Charpoy GI pipe and S&F new elbow GI three way 32mm bore medium grade subject to approval of sample complete ISI marked complete all specified and shown on drawing and directed by Eng-in-Charge. |
| 49 | M& L for removal of broken/ unsv check nuts from existing frame of charpoy GI pipe supply and fixing new check nuts GI 32mm bore medium garde ISI marked subject to approval of sample complete all specified and shown on drawing and directed by Engr-in -Charge. |
| 50 | TABLE COMPUTER: FD/E6/MAP/03 : Removing of unserviceable top and supply and fixing new top of size 560mm x 900mm shall be made up of 18mm thick ply wood BWR Gde of Make : century ply ply/ Green ply/ kit ply with both side laminated with laminate sheet with polished 4 mm thick teak wood beading all round the top complete all as specified and directed by Eng-in-charge. |
| 51 | All as per item No. 8.01 here-in-before but unsrv key board tray. Supply and fixing new key board tray of size 450mmx425mm shall be fixed on 14-18 inch telescopic channel approved by Engg in Charge. |
| 52 | All as per item No 7.01 here-in-before but side panels of size150mm x 657mm. |
| 53 | All as per item No 7.01 here-in-before but Bottom shelf of size300mm x 700mm. |
| 54 | All as per item No 7.01 here-in-before but middle shelf of size300mm x 450mm. |
| 55 | Removal of old broken Telescopic channels of drawer and S&F new one of 14-18 inch Make : Hettich/ Kaff shall be provided.Rest all as shown in drg.Ref Drg FD/E6/MAP/03 |
| 56 | Removing unserviceable lock of drawer and S&F new lock suitable for drawer with duplicate key complete all as shown on drawing and directed by Engg-in-Charge.Ref Drg FD/E6/MAP/03 |
| 57 | M&L Preparing surfaces and applying Painting by using black paint on all steel surfaces after rusting/ grinding the steel surfaces of computer table complete all as shown on drawing and directed by Engg-in-Charge .Ref Drg FD/E6/MAP/03 |
| 58 | Removal of Nylon buffers and S&F of new buffers of 35mm dia to legs complete all as shown on drawing and directed by Engg-in-Charge.Ref Drg FD/E6/MAP/03. Note for BOQ Sr Item No. 1.01 to 7.09 :-The above items shall be executed at different unit locations, MD Accns including at BSO furniture yard all as directed by Engineer-in-Charge/GE. Please Enable Macros to View BoQ information |
