|
| 1 | Taking down carefully copper/aluminium point wiring (light/fan/ socket/power) complete from the wall by cutting/ chasing including fittings and fixtures such as switches, ceiling roses, pendants holder, regulators, sockets, light fittings etc for credit and making good the disturbed surfaces of wall, floor etc complete all as specified and directed. |
| 2 | Taking down carefully sub main wiring of any description. |
| 3 | Taking down defective switch fuse main board /MCCB Enclosure/ distribution iron clad or sheet metal enclosure/ MCB DBs with MCBs of any capacity and make including wooden board etc complete all as specified and directed. |
| 4 | M & L for Point wiring (concealed) complete with 1.5 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade with multi stranded copper conductor drawn through in and including non metallic medium grade rigid PVC conduit, ISI marked not less than 20 mm dia including all accessories concealed in wall by cutting chases and including provision of 1.5 sqmm PVC insulated copper cable FRLS unsheathed as earth continuty conductor including fabricated branded modular metal flush box duly make embossed, concealed in walls and with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified and as directed for the followings:- |
| 5 | One light /Ceiling fan/exhaust fan point controlled by one, one way switch . |
| 6 | One bell point controlled by one bell push. |
| 7 | One light point controlled by two Nos two way switches |
| 8 | One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 9 | One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 10 | All as per item No.4 herein before but with 2.5 Sqmm cable for one 3 pin 15 Amp switch socket outlet and using 2.5 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed. Note for Item 4 & 5 : (i) In case the wiring is encountered with any beam/column, then the wiring will run on PVC casing&caping/Existing conduit to avoid any damage to the RCC portion. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling fan point wiring, in this specified portion wires shall run through the surface new conduit shall be provided as mentioned in note (i) above.(iii) Proper colour code will be used for wiring as per the electrical rule and as directed by EIC. |
| 11 | M&L switch Modular type 6 Amps 230V AC complete all as specified. |
| 12 | M&L switch modular type 6 amp SP two way complete all as specified. |
| 13 | M&L Modular socket outlet 5 pin 6 Amp socket 2 module complete all as specified. |
| 14 | M&L switch bell push Modular type 6 Amps 1W-1 module, 230V AC complete all as specified. |
| 15 | M&L switch Modular type 16 Amps 230V AC complete all as specified. |
| 16 | M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified. |
| 17 | S&F Modular five stepped type electronic fan regulator 2 module 360 degree rotatable type 230V AC complete all as specified. |
| 18 | S&F ceiling rose, PVC / Polycarbonate, isolated body with three terminals. |
| 19 | M&L bell electric (ding dong) 230 volt, SP all as specified and directed. |
| 20 | S&F of modular AC Box consisting of 20 Amp multipower socket including MCB of capacity 25 Amp mini MCB, ‘C’ curve, single phase 240 V, AC including modular box, frame, cover plate including plug top with indicator complete all as specified and directed by Engr-in-Charge |
| 21 | S&F of LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 20%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 120 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified. |
| 22 | S&F of LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1200 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.9, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥120 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. |
| 23 | S&F decorative type wall mounted luminaire (comet type) with unbreakable poly carbonate materials with 1x14 watt LED bulb B22 Base, complete all as directed. |
| 24 | S&F LED 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed complete all as specified. |
| 25 | S & F surface ceiling mounted, round LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 70 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. |
| 26 | M&L for angle Lamp holder with metalic ring, pvc/ polycarbonate type back plate with LED bulb 09 watt, 900 lumens out put, 6500K suitable for B-22 base all as per directed |
| 27 | S&F 35 W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 100lm/W. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 32mm dia GI light grade pipe1.2 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed. |
| 28 | S&F Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm complete all as specified and as directed. |
| 29 | S & F in repair factory made epoxy powder coated Load line Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 32 to 63 Amp SP MCBs outgoing complete all as specified. |
| 30 | Dismantling unserviceable burnt out MCCB by disconnecting the cable and Supply & Fix new MCCB's in the existing panel boards with new bolts, nuts,lugs& glands etc of the following capacities copmlete all as specified and directed :-MCCB 160 Amps,4 pole 16KA, 440 Volts |
| 31 | S&F MCB DB SPN 16 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete |
| 32 | S&F MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete |
| 33 | S&F MCB DB SPN 04 way, Double door 240 V AC 50Hz, MCB SPN as incomer / out going complete |
| 34 | S&F MCB SPN 63 Amps 240 volts 10 KA 50 HZ 'B' curve complete. |
| 35 | S&F MCB SPN 16 Amps 240 volts 10 KA 50 HZ 'B' curve complete. |
| 36 | S&F MCB SP 6 - 32 Amps 240 volts 10 KA 50 HZ 'B' curve complete. Please Enable Macros to View BoQ information |
| 37 | S&F MCB SP 6 - 32 Amps 240 volts 10 KA 50 HZ 'B' curve complete. Please Enable Macros to View BoQ information |
