|
| 1 | Desilting and cleaning of blocked storm water drain/ nallaha and culvert etc by removal of mud, soil, aggregate, debris manually and removal to a distance exc 50m but n.exc 100m and depositing in low lying area, etc complete all as specified and directed. |
| 2 | M&L for Plain Cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in benching, surface channels , drains and the like complete all as specified and directed. |
| 3 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and directed. |
| 4 | Carefully dismantling existing barbed wire fencing with angle iron post embeded on wall and refixing the same on new or old locations after repairing etc or removing unsv iron post from the site complete all as specified and directed.Note-PCC for bed block and painting to post shall measured and paid seprately under respective items. |
| 5 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete in all respect as specified and directed. |
| 6 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in Sub-base to floor finishes. |
| 7 | M&L for coloured machine pressed precast rubber moulded concrete interlocking red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50mm thick sand filling under paver, properly levelled etc, complete all as specified and directed. |
| 8 | M&L for coloured machine pressed precast rubber moulded concrete interlocking red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having glossy finish confirming to IS 15658-2006 of 80mm thickness, M-40 Grade, laid dry over and including 50mm thick sand filling under paver, properly levelled etc, complete all as specified and directed. |
| 9 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick,with grey cement and no pigments set, jointed and pointed in neat cement slurry in floors incl 20 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 10 | M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match complete al as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE complete all as specified and directed. |
| 11 | M&L for Plain Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directedcomplete all as specified and directed. |
| 12 | Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 13 | M&L for 15 mm thick rendering in CM 1:4 over brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | Demolition of brick or stone / concrete block/ stone boulder masonry built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles all as spd. |
| 15 | M&L for burnt clay brick work with sub-class 'B' bricks,(old size) straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 16 | All as per srl item No. 15 here-in-before but except brick work of any description in CM 1:6. complete all as specified. |
| 17 | M&L for preparation of new plastered surface of external wall surface and applying two coat of cement base paint incl curing complete all as specified & directed. |
| 18 | M&L for complete removal of existing treatment surface of wall and applying two coats of Cement Base Paint without any brush marks on the surface in any colour & matching with existing work over and including a coat of alkali resistant primer (as per manufacturer’s recommendations) including necessary scaffolding any height if required at site including cleaning of drops, splashes and leaving premise clean and tidy complete all as specified and as directed. |
| 19 | M&L for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots incl cornices washing down etc and applying one coat of Exterior Weather Coat paint , white or tinted complete all as specified & directed. |
| 20 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion(Posts embedded in Concrete, brick work,masonry, etc).and making good disturbed ground of any description complete all as specified and as directed by the Engineer-in-charge. |
| 21 | Dismantling existing wire fencing of any description, shape etc complete all as specified and directed. |
| 22 | Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth and removing surplus soil to a distance n.exc 50 m in any type of soil all as specified & directed. |
| 23 | M&L for PCC 1:3:6 , type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 24 | S&F mild steel fencing posts/struts including embeding in concrete and screwing etc. including securing bolts; including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 25 | Supply only chain link fencing size (75 mm X 75 mm) mesh, complete all as specified and directed. |
| 26 | Fixing only chain link fencing including line wires, any mesh, size and type to any type and standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed. (Note:- Weight per Sqm of chain link fencing should be decided by BOO conved by GE before payment of workdone) |
| 27 | S&F MS Round bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & securing with clips for holding chain link fencing, complete all as specified and directed. |
| 28 | M&L for mild steel screw bolts 5mm to 10mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed. |
| 29 | S&F in repair galvanised medium coated as per IS -4826, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel complete all as specified and directed. |
| 30 | Restraining resecuring including making good staples the old galvanised steel barbed wire any dia incl securing or tying at crossing as directed, complete all as specified and directed. |
| 31 | M&L for Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, confirming to Fe-290 Gde E-165, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing including dismantling of old u/s framed work complete all as specified and directed. |
| 32 | M&L Mild steel, plain, black sheet of 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required. |
| 33 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with one coats of synthetic enamel paint complete all as specified and directed. |
| 34 | Demolition of cement concrete(reinforced)of any description and in any position incl removal complete all as specified and as directed. |
| 35 | M&L for formwork to sides of pillars, struts columns etc concrete fair finished surfaces complete all as specified and directed. |
| 36 | M&L for Reinforced cement concrete (nominal mix) (1:2:4, type B1 using 20mm graded crushed stone aggregates) in columns, pillars, piers ,post, struts etc complete all as specified and directed. |
| 37 | M&L for Providing precast cement concrete 1:2:4, type B1 (20 mm graded crushed stone aggregate) set in CM 1:6, as in cover slabs for manholes ,drain etc with plain fair faces incl necessary formwork casted complete all as specified and directed. |
| 38 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 39 | S&F TMT bars but 5mm and over upto 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 40 | Demolition and breaking up drain pipes (PVC,Salt glazed ware, AC or Reinforced concrete) set in cement mortar,internal dia of pipe in 75/110mm including earth work complete all as specified and directed. |
| 41 | M&L for PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as spd and directed. |
| 42 | M&L for PVC (SWR) pipes 100 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as spd and directed. |
| 43 | Demoliton and breaking up drain pipes 150mm/300mm bore (Salt glazed ware, with haunching etc incl necessary excavation (salt glazed stone ware, AC or reinforced concrete pipes) set in cement mortar and taking out off trenches and removing the debris from the site all as spd for150mm dia pipe complete all as specified and directed. |
| 44 | M&L for Reinforced concrete 150mm bore pipes, class NP2, laid and jointed complete with collars complete all as specified and directed incl returning filling with available soil complete all as specified and directed. |
| 45 | M&L for Reinforced concrete 300 mm bore pipes, class NP2, laid and jointed complete with collars complete all as specified and directed incl demolition of existing reinforced concrete pipes complete. |
| 46 | M&L for Cement concrete 1:4:8, type D-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 47 | Taking down existing Rolling shutter and refixing to same opening after repairing,easing and adjusting incl replacement of ball bearings,anchoring rod, gear box and crank handle, safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 48 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and dismentaling of old UNSV kerb stone from any position complete all as specified and directed. |
| 49 | M&L for preparation of new surfaces of brick, stone, concrete of any description over 10cm girth or width, not otherwise described and apply one coat of synthetic enamel paint (ordinary tint) over a coat of priming paint complete all as specified and as directed by Engr in charge. |
| 50 | Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work. |
| 51 | M&L for framed steel work such as Roof trussed (framed) purlins crane guntries rail & fastening and heavy bracket (beam tea angle channel or flat section of Fe 410 -W (GdeE- 250) qualityA Fe) incl distance pieces cleats etc all as specified |
| 52 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified. |
| 53 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping |
| 54 | S&F pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 55 | M&L for preparation of Old steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint complete all as specified and directed complete all as specified and directed. |
| 56 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 87,500.00 and any other reduction if any from quoted amount. Please Enable Macros to View BoQ information |
