Tender For Repair To Steel Furniture Including Painting To Steel Furniture At 54 Asp And Repair To Wooden Furniture Including Polishing To Wooden Furniture At 54 Asp Af Stn Gurgaon Under Ge (Af) Gurgaon No 1., Gurgaon-Haryana

TDR : 55773057

Tender Notice
BOQ

21 Days Left

Gurgaon , Haryana

Tender Brief : Tender For Repair To Steel Furniture Including Painting To Steel Furniture At 54 Asp And Repair To Wooden Furniture Including Polishing To Wooden Furniture At 54 Asp Af Stn Gurgaon Under Ge (Af) Gurgaon No 1.

Document Fees
₹ 500 /-

EMD
₹ 76000.0 /-

Tender Value
₹ 38 Lakhs /-

Submission Date
23-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Schedule-A (Steel Furniture)
2	Removal of following existing unserviceable steel/UNSV components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, providing hinges, denting, applying steel putty for leveled surface, placing every part in-tact and painting the disturbed portion of Almirah Steel Med Complete all as specified and as applicable as drawings,FD-1032. NOTE : Work will be executed where the furniture exist in BSO's Furniture Yard at AF Stn Palam as directed by Engineer-in-Charge:-Removing of unserviceable and worn out legs and providing new legs made out of 1mm thick MS sheet fabricated to shape as per existing almirah steel with shelves/Half S & Half H Large complete all as specified and directed.
3	Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type almirah Med steel complete all as specified and directed.
4	Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape Almirah Med steel. (Drg No FD-1032) complete all as specified and directed.
5	Taking down existing unserviceable MS clips with screw/nuts and bolts of almirah steel with shelves/Half S & Half H medium (Drg No FD-1032) refixing/weldling with new items, MS clips with screws/nuts & bolts complete all as specified and directed.
6	All as per item No 1.04 above but locks (6 levers ) of make link or Harrison approved by GE.
7	All as per item No 1.04 above but CP handle with bolt.
8	All as per item No 1.04 above but locking box / device
9	Scratching of scratches/dentings to powder coated two coats steel surface with emery paper, applying metel putty wherever required and repair inside/out side with Spray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.
10	Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside only with Spray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.
11	Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting Spray duly (Hammer tone) matched with existing surfaces or as directed by Engr-in-charge.
12	All as per item No 1.00 here-in -before but ALMIRAH LARGE STEEL FD-1031:-
13	Removing of unserviceable and worn out legs and providing new legs made out of 20 gauge MS sheet fabricated to shape as per existing almirah steel with shelves/Half S & Half H Large complete all as specified and directed.
14	Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type almirah large steel complete all as specified and directed.
15	Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape Almirah large steel. (Drg No FD-1031) complete all as specified and directed.
16	Taking down existing unserviceable MS clips with screw/nuts and bolts of almirah steel with shelves/Half S & Half H Large (Drg No FD-1031) refixing/weldling with new items, MS clips with screws/nuts & bolts complete all as specified and directed.
17	All as per item No 2.04 above but locks (6 levers ) of make link or Harrison as approved by GE.
18	All as per item No 2.04 above but CP handle with bolt.
19	All as per item No 2.04 above but mild steel locking rod.
20	All as per item No 2.04 above but locking box / device and interial locking box
21	Scratching of scratches/dentings to powder coated two coats steel surface with emery paper, applying metel putty wherever required and repair inside/out side withSpray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.
22	Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside only with Spray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.
23	Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting Spray duly (Hammer tone) matched with existing surfaces or as directed by Engr-in-charge.
24	All as per item No 1.00 here-in -before but CHARPOY IP WITH HARD TOP ,FD/MAP-II/01
25	12 mm BWP as per IS 710 ply placed in position as shown in drg. (Century ply\\"'Sainik 710/Greenply/Archidply /Duroply/National prima)
26	Rubber shoes 32mmx32mm of high quality placed in position as shown in drg.
27	Scratching of scratches/ dentings to powder coated two coats steel surfaces with emery paper ,applying metal putty wherever required and repair with painting duly matched with existing surfaces.
28	All as per item No 1.00 here-in -before but TABLE BEDSIDE STEEL ,FD/E6/MAP/15(R)
29	18/19mm thick pre-laminated MDF board exterior for sides, top and front of table bed side of size 450mmx500mm placed in position with 4mm thick teak wood edging alround the edges of the top as shown in drg with screws. (Make Action tesa, Century, Green panel).
30	Front Legs to table bed side steel made of 18mm MS square pipe placed in position as shown in drg.
31	CP steel 100mm long handle to the drawers of the table bed side steel placed in position as shown in drg.
32	Supply and fix new drawer front for table bed side made of pre-laminated MDF board exterior 18 mm All as per Drg.
33	Replacement of worn out back conduct MS 25 mm Sq pipe 16 gauge whrerever required as directed and fixing as shown on drg . (welding points shall be measured and paid separately.
34	Mig welding of broken joints MS members (tabular) .
35	Supply and fix plywood back 6 mm IS 710 grade for table bed side All as per Drg.
36	Material and labour for Scrapping of old polish and dirt from the surfaces of bidding by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
37	Painting with two coats of black synthetic enamel paint to complete table etc. all as specified and directed.
38	Supply and fixing of sides and bottom of Bed side table : It shall be made out of one side melamine faced pre-laminated MDF board exterior 18mm thick confirming to IS in baverian beach shade as per drg .
39	Supply and fix suitable PVC shoes of superior quality .
40	All as per item No 1.00 here-in -before but CHAIR COMPUTER, FD/E6/MAP/01, TP
41	Removing unserviceable damaged Seat & back of Chair computer, supply and fixing of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic Mtr on Hampden machine ,all as directed and specified by Engr -in -charge
42	Removing old unserviceable arm rest of chair computer and S&F new one made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in –charge.
43	Removing unserviceable castor twin wheels and S&F new superior quality castor twin wheel suitable for chair computer all as directed
44	Removing unserviceable Base and S&F new Base suitable for chair computer all as directed
45	Removing unserviceable adjustable Hydrolic system and S&F new adjustable Hydrolic system suitable for chair computer all as specified and directed by Engr -in charge.
46	Removing of old unsv tapestry cloth and supply and fixs new crape cloth (rate should not be less than INR 220/- per RM) as apporoved and directed by in Engr charge.
47	All as per item No 1.00 here-in -before but CHAIR REVOLVING EXECUTIVE(LOW AND HIGH BACK)/CHAIR CONFERENCE TP MAKE GEEKAEN/E S C/GODREJ/ETC & FD/E6/MAP/01
48	Removing of old fabric and pressed molded polyurethane foam cushion from seat and back of chair revolving executive after carefully removing the PVC lipping from the edges of the seat and back of the chair, Supply and fixing new moulded polyurethane foam cushion 50mm thick and fabric over the seat and back of the chair as per the existing shape of the chair duly providing new PVC lipping all-round the edges of seat and back of the chair complete all as specified and all as directed by Engr-in- Charge.
49	Removing the old unserviceable arm of the chair revolving executive by unscrewing the bolt from the inner side, Supply and fixing new arm to the chair revolving executive of the same shape and size as of existing one. The arm shall be of black integral skin polyurethane reinforced with MS insert, it shall be scratch and weather resistant.
50	Removing the old unserviceable complete pedestal assembly along with hydraulic system of chair revolving executive by removing the pin from bottom carefully without damaging the upper portion. Supply and fixing new pedestal assembly along with hydraulic system of chair revolving executive with standard workmanship .The pedestal assembly shall consists of two wheel coasters for smooth running of chairs and shall have gas lift mechanism complete all as specified and all as directed by Engr-in- Charge.
51	Removing of old unsv tapestry cloth and supply and fixs new cloth (rate should not be less than INR 120/- per RM) as apporoved and directed by in Engr charge.
52	Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed.
53	All as per item No 1.00 here-in -before but TABLE COMPUTER, FD/E6/MAP/03,TP
54	Key Board of table computer pre-laminated MDF board exterior grade
55	Material and labour for removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior grade in colour/shade as existing shade. (Make Action tesa, Century, Green panel)
56	Remove UNSV Telescopic chanel and fixing of New telescopic chanel
57	Drawer of table with telescopic chanel
58	Shelves of table
59	vertical side shelf
60	Painting with two coats of black synthetic enamel paint to complete table etc. all as specified and directed.
61	All as per item No 1.00 here-in -before but BED HARD STEEL (FD/E6/MAP/08(R )
62	12 mm BWP as per IS 710 ply placed in position as shown in drg..(Century ply\\"'Sainik 710/Greenply/Archidply)
63	Rubber shoes 32mmx32mm of high quality placed in position as shown in drg.
64	Scratching of scraches/ dentings to powder coated two coats steel surfaces with emery paper ,applying metal putty wherever required and repair with painting duly matched with existing surfaces.
65	Head Rest as per drg (pre-laminated MDF board exterior)
66	Foot Rest as per Drg (pre-laminated MDF board exterior)
67	All as per item No 1.00 here-in -before but CHARPOY GI PIPE,FD-220:-
68	Taking out existing unserviceable plywood from charpoy, dismantling the unserviceable parts like GI elbow, GI check nuts, GI pipe and tightening the same with new parts (supplied in succeding items in schedule), supply and fixing of plywood 12mm thick 5 ply of size 1.98x0.93mtr BWR Grade ISI confirming to relevant IS with 3 Nos stiffnerand 50mmX5mmX930mm fixing with nut and bolt 6mm dia complete along with painting all as specified and directed by Engineer-in-Charge. (Make : Century ply\\"'Sainik 710/Greenply\\" Green gold\\"/Archidply\\" Platinum\\"/Duroply\\"titanium ).
69	Supply only GI 3 way elbow ISI marked of size 32mm bore weight not less than 400 gms each complete all as specified and directed by Engineer-in-Charge. (Make : ARE).
70	Supply only GI check nut 6mm thick weight not less than 35 gms each complete all as specifed and directed by Engineer-in-Charge.
71	Supply only long rail of charpoys GI pipe long rail made out of 32mm bore GI pipe medium grade confirming to IS : 1239 Part-I of length 1.9 mtrs duly threaded one side upto 25mm long at end and other side to 50 mm long at end complete all as specified and directed by Engineer-in-charge. (Make: Jindal).
72	Converting long rail into short Rail (Obtain from Ser No 07.01 above) making threads 25mm long both side end complete all as specified and directed by Engineer-in-Charge.
73	Converting short rail into leg (Obtain from Ser No 7.04 above) making threads 25mm long both side end complete all as specified and directed by Engineer-in-Charge.
74	Supply only MS Flat 920x40x5 mm duly painted black colour after primer coat complete all as specified and directed. (Make: Jindal).
75	Rubber shoes 32mmx32mm of high quality placed in position as shown in drg.
76	All as per item No 1.00 here-in -before but TEAPOY VERANDAH,FD/E6/MAP/17
77	Material and labour for removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior grade in colour/shade as approved by GE. (Make Action tesa, Century, Green panel).
78	25mmx3mm flat iron on top of legs of length 800mm welded to existing flat iron at top placed in position as shown in drg.
79	Material and labour for replacement of worn out 10mm dia MS bar wherever required as directed and fixing as shown on drg. (Note :- Welding points shall be measured and paid separetly).
80	MIG welding of broken joints MS members For table .
81	Rubber shoes 18mm square of high quality placed in position as shown in drg.
82	Material and labour for carrying out minor repairs like denting & gas welding of broken Frame etc and painting with two coats of the White colour synthetic enamel paint to complete table etc complete all as specified and directed.
83	All as per item No 1.00 here-in -before but CHAIR WRITING,FD/E6/MAP/12 FD-280, FD-360
84	Removing unserviceable damaged Seat & back of Chair writing. Supply and fixing the seat made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.
85	Painting the entire frame with two coats of synthetic enamel paint 1st quality including preparation of surface of chair writing officers all as directed by Engr -in -charge.
86	Removing old unserviceable arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.
87	Removing of old unsv tapestry cloth and supply and fixs new crape cloth (rate should not be less than INR 220/- per RM) as apporoved and directed by in Engr charge.
88	Removing old broken rubber stopper of the chairs and S&F new Rubber stopper at bottom all as directed and specified by Engr -in -charge
89	All as per item No 1.00 here-in -before but CHAIR VERANDAH:-, FD-,256,359,259
90	Spot gas welding to broken parts/joints of chairs.
91	Removing the existing unserviceable cane plastic from the chair and Recanning the chair with plastic cane 3.5mm to 4mm wide, white colour, (MAT Pattern),half round, virgin quality as approved by Engr-in-Charge.
92	Removing the existing unserviceable PVC seat from the chair and supply and fixing PVC seat 4mm thick. Due care shall be taken while fixing the PVC seat, The PVC seat shall get approved from BSO and GE before supply.
93	Best quality new PVC shoes to the legs of chair.
94	Painting the frame of the chairs by two coats of synthetic enamel white of approved quality.
95	All as per item No 1.00 here-in -before but Shoe Rack Steel FD/E6/MAP/02R :-
96	Continuous Gas welding as required .
97	Hard rubber shoes as per drg
98	Painting to steel shoe rack with synthetic enamel paint two coats of existing colour after prepration of surfaces.
99	All asper Item No 1.00 here -in- before but SOFA single seater/ two seater /three seater chrome plated arms and legs (TP) MAKE GEEKAEN / E S C / GODREJ / ETC
100	Continuous Gas welding as required .
101	Taking out old pressed /torn old cushions fron sofa single seater of Supply 40 density thick foam cushion duly covered with good quality leatherite /suede tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.
102	Taking out old pressed /torn old cushions fron sofa two seater Supply 40 density thick foam cushion duly covered with good quality leatherite /suede tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.
103	Taking out old pressed /torn old cushions fron sofa three seater Supply 40 density thick foam cushion duly covered with good quality leatherite suede tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.
104	Professional dry cleaning of leather cover/foam cushions of sofa single/ two/ three seater to remove surface dust, stain, odors and refresh the fabric. All as specified and directed by Engr-In-charge
105	All as per item No 1.00 here-in -before but LOCKER BED SIDE STEEL ,FD-127(M)/257/1029
106	All as per item No 1.05 above but locks (6 levers ) of make link or Harrison approved by GE.
107	All as per item No 1.05 above but CP handle with bolt.
108	Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape of locker steel complete all as specified and directed.
109	Removing of unserviceable and worn out legs and providing new legs made out of 1.00mm thick MS sheet fabricated to shape as per existing locker steel complete all as specified and directed.
110	Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type locker steel complete all as specified and directed.
111	Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair inside/out side with painting duty matched with existing surfaces
112	Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair inside side only with painting duty matched with existing surfaces
113	Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting duty matched with existing surfaces
114	All as per item No 1.00 here-in -before but TABLE OFFICE CLERK STEEL: FD-84, 381, 1003 & 1004.
115	Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg.
116	Removing of unserviceable lock and supplying and fixing new lock 32 to 55 mm size with duplicate keys and necessary screws etc make link or Harrison approved by GE.
117	Supply and fixing new drawer made out of 1mm thick MS Sheet alongwith PVC recessed handle as approved including taking down old drawer.
118	Supply and fix suitable PVC shoes of superior quality for legs for table office cleark steel.
119	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
120	Replacement of worn out conduct MS 25 mm Sq pipe 16 gauge whrerever required as directed and fixing as shown on drg . (welding points shall be measured and paid separately.
121	Carrying out minor repairs like denting & gas welding of broken drawers etc and spray painting with one coats of the green colour synthetic enamel paint to complete (External & enternal ) table etc all completed.
122	All as per item No 1.00 here-in -before but BOOK CASE STEEL- FD-1028,69 (M),45/337
123	Applying one coat of synthetic enamel paint olive green including preparation of old painted surfaces after necessary denting to Book case steel shown on drg (FD-1028) complete.
124	Lock 4/5 levers godrej pattern, including two keys and including removing of unserviceable lock from Book case steel shown on drg (FD-1028) complete.
125	Handle steel chromium plated size- 100mm long including removing of unserviceable handle steel from Book case steel shown on drg (FD-1028) complete.
126	Glass pane 3mm thick including removing of unserviceable/broken glass pane from Book case steel shown on drg (FD-1028) complete.
127	All as per item No 1. here-in -before but RACK Universal SS 2150x1300x400mm,Stainless steel grade 304 galvomnized shelf rack with 5 shelf
128	Back to rack Univeral SS steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg.
129	Sides to rack Univeral SS steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg.
130	Shelves to rack Univeral SS steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.
131	One coat of synthetic smoke grey paint on all steel portion of rack complete.
132	All as per item No 1.00 here-in -before but CHAIR STEEL TUBULAR WITH ARMS :FD-75(M)
133	Scratching the entire frame of chair and applying desired coat of synthetic enamel olive green/steel grey paint after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge.
134	02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers and screws to fix two flats placed beneath the seat complete all as specified and all as directed by Engr-in- Charge.
135	Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers.
136	Second class Hard wood Arm rest as per drg
137	Hard rubber shoes as per drg
138	Rubber cap for conduit pipe as per drg
139	Schedule-A Wooden Furniture
140	Removal of following existing unserviceable old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact and polishing/painting the disturbed portion of Chair Dining as applicable as per drg No.FD/MAP-II/10. Work will be executed where the furniture exist in BSO's Furniture Yard at AF Stn Palam as directed by Engineer-in-Charge:-
141	Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.
142	All as per item No 19.01 above but rear Leg
143	All as per item No 19.01 above but back rest
144	All as per item No 19.01 above but leg stiffener .
145	All as per item No 19.01 above but front Rail
146	All as per item No 19.01 above but rear Rail
147	All as per item No 19.01 above but side Rail
148	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
149	Removing of old unsv tapestry cloth and supply and fixs new best quality tepestry cloth (Not less than Rs 200 per meter) as apporoved and directed by in Engr charge.
150	seat made of 10mm thick BWP IS 710 plywood over which 40 density cushion (Make- Sleepwell/Dureo Flexs/Godrej) foam 75mm thick shall be provided duly covered with best quality tepestry cloth (Not less than Rs 200 per meter )as approved bt BSO.
151	All same as per item No. 19.01 above but wooden cleat.
152	All asper Item No 19.01 here -in- before but Chair Dining as applicable as per drg No.FD-279/262/228
153	Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.
154	All as per item No 20.01 above but rear Leg
155	All as per item No 20.01 above but back rest
156	All as per item No 20.01 above but leg stiffener .
157	All as per item No 20.01 above but front Rail
158	All as per item No 20.01 above but rear Rail
159	All as per item No 20.01 above but side Rail
160	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
161	Material and labour for canning for seat and back: Canning shall be done with plastic cane 2mm wide half round for seat and 3mm wide for border in white colour 0.4mm thick weighing not less than 6 gms per 10 running meter in true \\"godrej pattern\\" all as shown on drawings. Holes for caning shall be 12.5 mm centre to centre and complete all as specified and directed. (Make : Premier/Shah or as approved).
162	All same as per item No. 20.01 above but wooden cleat.
163	Removing the existing unserviceable cane plastic from the chair and supply and fixing PVC seat 4mm thick in lieu of cane after providing corner support and one additional stiffener at centre for support of PVC seat. The PVC seat shall be fixed with proper screws and good workmanship .Due care shall be taken while fixing the PVC seat, the gaps if appears be filed with putty mixed with adhesive so as to make surface smooth and tidy. The PVC seat shall get approved from BSO and GE before supply. MAKE OF PVC SEAT –AMKO/COMFO or equivalent as approved by GE.
164	All asper Item No 19.00 here -in- before but TABLE CENTRE ,FD-274:-
165	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
166	Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots ,sap wood and other blemishes after removing the old damaged/broken one per drg without damaging the other parts.
167	Long rail : All same as per item No 21.02 above but long rail for table centre.
168	Shor rail : All same as per item No 21.02 above but short rail for table centre.
169	Stiffener : All same as per item No 21.02 above but short rail for table centre.
170	Teak wood corner shall be provided to each legs as per sample rest all as directed by EIC/GE.
171	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
172	All asper Item No 19.00 here -in- before but TABLE DINING FOR 6 PERSONS:-FD/MAP-II/03:-
173	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
174	Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one per drg without damaging the other parts.
175	Long rail : All same as per item No 22.02 above but long rail for table dining 6 per.
176	Shor rail : All same as per item No 22.02 above but short rail for table dining 6 per.
177	Teak wood corner shall be provided to each legs as per sample rest all as directed by EIC/GE.
178	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
179	All asper Item No 19.00 here -in- before but TABLE WRITING:-FD-274/275:-
180	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with hot pressed string bonded as directed. (Make Action tesa, Century, Green panel).
181	Supply and fixing of sides and bottom of cup board : It shall be made out of one side melamine faced pre-laminated MDF board exterior 18mm thick confirming to IS in baverian beach shade as per drg .
182	Supply and fixing of shutters complete with lock : shutter shall be made out of both side melamine faced pre-laminated MDF board 18mm exterior thick confirming to IS in baverian beach shade as per drg duly fixed with paino type hinges and suitable S/S knob 40mm dia as approved with lock and suitable catcher.
183	Supply and fix leg in repair made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.
184	All as per item No 23.04 above but long rail .
185	All as per item No 23.04 above but Long stiffener.
186	All as per item No 23.04 above but Short rail
187	All as per item No 23.04 above but bottom rail of table writing.
188	Supply and fixing of back of cup board : It shall be made out of 6mm thick plywood BWP grade confirming to IS 710 as approved to be fixed as shown on drg .
189	Supply and fixing of partition of the cup board : It shall be made out of one side melamine faced pre-laminated MDF board 18mm exterior thick confirming to IS in baverian beach shade as per drg and as approved and all as directed by Engr-in-charge.
190	Drawer made of 16 mm thick plywood IS 710 grade with bothside sumica 0.8/1 mm thick with 1.6 mm thick PVC edging through edge bander machine of shade as approved by EIC/GE with 2 mm thick PVC edging in front & sides and bottom of drawer shall be 9 mm thick BWP Plywood with white sunmica 0.8 mm thick (Make-Century ply\\"'Sainik 710/Greenply/Archidply /Duroply/National prima) complete with telescopic channel (make -Ebco/Ozone/Hettich) complete . Rest all as per drg.
191	Teak wood corner shall be provided to each legs as per sample rest all as directed by EIC/GE.
192	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
193	All asper Item No 1.00 here -in- before but TABLE DRESSING GENTS FD/E6/MAP/16:-
194	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with hot press string bonded as directed. (Make Action tesa, Century, Green panel).
195	All same as per item No 24.01 above but side of table dressing gents.
196	All same as per item No 24.01 above but bottom of table dressing gents .
197	Mirror : S & F mirror along with frame as per drg made of well seasoned teak wood free from cracks and knots duly french polished. Mirror shall be of electro copper plated polished sheet glass 6 mm thick Make- Saint Gobain/Modiguard. Suitable rawl plug heavy duty as per drg 2 Nos shall be provided to the back of the mirror for hanging. Back of the frame shall be of plywood commercial 6mm thick BWR grade confirming to IS as approved and as shown on drg.
198	Back : Back shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade in one piece after removing the old one. suitable rawl plug as per drg 2 Nos shall provided to the back for hanging .
199	Material and labour for Scrapping of old polish and dirt from the surfaces of Table Dressing gents by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
200	All same as per item No 24.01 above but Magnetic catcher for gents mirror
201	All asper Item No 19.00 here -in- before but TABLE DRESSING LADIES FD/MAP-II/07:-
202	Back : All same as per item No 24.05 above but back of table dressing ladies.
203	Side : All same as per item No 24.01 above but suitable for Table dressing ladies with mirror as per the drg.
204	Bottom : All same as per item No 24.01 above but back of table dressing ladies.
205	Drawer with Handle and telescopic channel : All same as per item No 16.04 above but suitable for Table dressing ladies with mirror as per the drg.
206	Replacement of unserviceable table top (both sides and central), making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make - Action tesa, Century, Green panel).
207	Supply and fix of mirror : All same as per item No 5.05 above but suitable for Table dressing ladies with mirror as per the drg.
208	Taking out old pressed /torn old cushions from stool and Supply 75mm foam cushion and 40 densitythick foam cushion (Make- Sleepwell/Dureo Flexs/Godrej) of suitable for stool dressing duly covered with good quality swed tapestry all over(Not less than Rs 200 per metre)cloth of approved color and shade by GE, Each cushion cover shall be provided with best quality zip stitched on one edge of cushion with standard fitting.(Sleepwell and Kurloan)
209	Taking out old torn/ faded cushion cover from foam cushions and supply and fixing new cushion cover to the existing cushion. The cover of the cushion shall be of best quality tapestry cloth ( Not less than Rs.200 per meter) as approved by GE complete , Each cushion cover shall be provided with best quality zip stitched on one edge of cushion with standard fitting.
210	Long Stiffener : It shall be made of well seasoned teak wood free from cracks and knots cut to size as per drg duly finished/ french polished over a coat of primer and to be fixed with suitable no of screw wood steel .
211	Short Stiffener : All same as per item no. 25.08 above but short stiffener of table dressing ladies.
212	Leg : All same as per item no. 25.08 above but leg of table dressing ladies.
213	CP steel 100mm long handle to the drawers & shutter of table dressing ladies placed in position as shown in drg.
214	50mm dia swivel type castors wheel for stool dressing.
215	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
216	All asper Item No 19.00 here -in- before but SOFA SET 5 SEATER,(2 Single seater and One 3seater,10Nos cushion in each set) FD/MAP-II/02
217	wooden batten
218	Teak wood bearer
219	Taking out old pressed /torn old cushions and Supply 40 density thick foam cushion of size 21”x22”x4” (Make- Sleepwell/Deuroflexs/Godrej ISI Mark) duly covered with good quality tapestry all over(Not less than Rs 350 per metre) cloth of approved color and shade by GE (Sample of cloth is kept with Enginner-In-Charge), Each cushion cover shall be provided with best quality matching zip stitched on one edge of cushion with standard fitting with pipeing all around and as directed by ENGR-in-C.
220	Taking out old torn/ faded cushion cover from foam cushions and supply and fixing new cushion cover to the existing cushion. The cover of the cushion shall be of best quality tapestry cloth ( Not less than Rs.350 per meter) as approved by GE complete , Each cushion cover shall be provided with best quality matching zip stitched on one edge of cushion with standard fitting with pipeing all around and as directed by ENGR-in-C.
221	Scratching the entire wooden pallets of sofa 5 seater , filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.
222	All asper Item No 19.00 here -in- before but SIDE BOARD :FD-1112:-
223	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
224	All as specified above item No 27.01 above but for bottom of side board
225	All same as per item No 27.01 done but sides for side board.
226	Supply and fix of back : It shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade in one piece.
227	Supply and fixing of shutters complete with knob and lock : shutter shall be made out of both side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg duly fixed with paino type hinges and suitable S/S knob 40mm dia as approved with lock and suitable catcher.
228	Drawer with handle : Drawer shall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg and provided with recessed handle of best quality as approved. Bottom of drawer shall be made of one side melamine faced pre-laminated MDF board 6mm thick .
229	Leg shall be made of well seasoned teak wood free from cracks and knots cut to size as per drg duly finished/ french polished over a coat of primer and to be fixed with suitable groving with long/short frame .
230	All same as per item No 27.07 above but long stiffener .
231	All same as per item No 27.07 above but Short stiffener .
232	CP steel 100mm long handle to the drawers & shutter of Bin Linen multi purpose placed in position as shown in drg.
233	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
234	All asper Item No 19.00 here -in- before but TABLE PEG ,FD-384:-
235	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
236	Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one as per drg without damaging the other parts.
237	All same as per item No 28.02 above but long rail for Peg table.
238	All same as per item No 28.02 above but short rail for Peg table.
239	All same as per item No 28.02 above but stiffener for Peg Table.
240	Teak wood corner shall be provided to each legs as per sample rest all as directed by EIC/GE.
241	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
242	All as per Item No 19.00 here -in- before but TV TROLLEY , FD/E6/MAP/04 (R):-
243	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
244	Sides
245	Baes/Shelves
246	5.5mm thick plain glass with magnetic catchers.
247	50mm dia swivel type castors wheel.
248	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
249	All asper Item No 19.00 here -in- before but HAT STAND WITH MIRROR,FD-233:-
250	Supply and fix of beading : Beading made out of well seasoned teak wood size 35x6mm all around shall be provided to the frame of hat stand as shown on drg .
251	Supply and fix of plywood : Plywood 4mm thick commercial confirming to IS 710 duly approved shall be provided wherever required to be fixed with head less nails at the back side of hat stand all as shown on drg and as directed by Engr-in-charge .
252	Supply and fix of plywood : Plywood one side teak face 4mm thick commercial confirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the front side of hat stand all as shown on drg .
253	Supply and fixing of peg : Aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long as shown on drg .
254	Supply and fix of looking Mirror : Looking Mirror size 440x300x6mm of approved quality make-Modi guard/Saint Gobain/Swastic duly fixed with beading size 35x6mm made out of well seasoned teak wood duly finished as shown on drg .
255	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
256	All asper Item No 19.00 here -in- before but TEAPOY WOODEN,FD- 382:-
257	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
258	Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one as per drg without damaging the other parts.
259	All same as per item No 31.02 above but long rail for teapoy.
260	All same as per item No 31.02 above but short rail for teapoy.
261	: All same as per item No 31.02 above but stiffener for teapoy.
262	Teak wood corner shall be provided to each legs as per sample rest all as directed by EIC/GE.
263	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
264	All as per Item No 19.00 here -in- before but BIN LINEN PURPOSE WITH IRONING BOARD FDNo,FD/E6/MAP/09:-
265	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
266	Plywood Commercial 12 mm thick Back ply
267	Prelaminated partical board 18mm thick to the Door shutter with magnetic catcher
268	Prelaminated particle board 18mm thick to the drawer.
269	CP steel 100mm long handle to the drawers & shutter of Bin Linen multi purpose placed in position as shown in drg.
270	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
271	All asper Item No 25.00 here -in- before but TABLE OFFICE CLERK WOODEN FD-321, DB-4120:-
272	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
273	Supply and fix leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.
274	All same as per ser item No. 33.02 above but rail.
275	Repair to shutter of table by providing hinges .
276	Drawer made of 16 mm thick plywood BWP grade with bothside sumica 0.8/1 mm thick with 1.6 mm thick PVC edging through edge bander machine of shade as approved by EIC/GE with 2 mm thick PVC edging in front & sides and bottom of drawer shall be 9 mm thick BWP Plywood with white sunmica 0.8 mm thick (Make-Century ply/Greenply/Archidply) complete with telescopic channel (make -Ebco/Ozone/Hettich) complete . Rest all as per drg.
277	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
278	All as per item No 19.00 here-in -before but Table office officer (TP)
279	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior grade in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
280	Long rail
281	Short rail
282	L-shape corner of flat iron 38x3mm 4\\" x 4\\" to the Table between legs and rail to be fixed with screw.
283	Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.
284	All asper Item No 19.00 here -in- before but Wooden BED PLY TOP:FD-246 & TP Make Royal Koas:-
285	Supply and fix of Long rail : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one per drg without damaging the other parts.
286	Head Rest : All same as per item No 35.01 above
287	Foot rest : All same as per item No 35.01 above
288	12 mm commercial BWR Grade ISI ply placed in position as shown in drg.(Century ply\\"'Sainik 710/Greenply\\" Green gold\\"/Archidply\\" Platinum\\"/Duroply\\"titanium\\"))
289	Supply and fix of Drawar with channel : Drawar with channel shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one per drg without damaging the other parts.
290	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
291	All asper Item No 19.00 here -in- before but CHAIR EASY,FD-229/358:-
292	Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.
293	All as per item No 36.01 above but rear leg .
294	All as per item No 36.01 above but Rail seat
295	All as per item No 36.01 above but Stiffener
296	All as per item No 36.01 above but Back rest
297	All as per item No 36.01 above but Arm rest
298	All same as per item No. 36.01 above but wooden cleat.
299	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
300	Material and labour for canning for seat and back: Canning shall be done with plastic cane 2mm wide half round for seat and 3mm wide for border in white colour 0.4mm thick weighing not less than 6 gms per 10 running meter in true \\"godrej pattern\\" all as shown on drawings. Holes for caning shall be 12.5 mm centre to centre and complete all as specified and directed. (Make : Premier/Shah or as approved).
301	All asper Item No 19.00 here -in- before but TABLE DINING FOR 8 PERSONS:-FD-273 / 239:-
302	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Ecoboard, Green panelmax).
303	Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one per drg without damaging the other parts.
304	Long rail : All same as per item No 37.02 above but long rail for table dining 8 per.
305	Shor rail : All same as per item No 37.02 above but short rail for table dining 8 per.
306	L-shape corner of flat iron 4\\" x 4\\" to the Table between legs and rail to be fixed with screw.
307	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
308	Hard rubber shoes standard quality as per drg.
309	Note :- The amount of Rs 29747.00 against Schedule of Credit on Srl Page 127 - 129 shall be deducted from the total amount quoted against Sch 'A' Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Haryana Tenders

Furniture Tenders

Furniture Items Tenders

Steel Furniture Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair To Steel Furniture Including Painting To Steel Furniture At 54 Asp And Repair To Wooden Furniture Including Polishing To Wooden Furniture At 54 Asp Af Stn Gurgaon Under Ge (Af) Gurgaon No 1., Gurgaon-Haryana

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair To Steel Furniture Including Painting To Steel Furniture At 54 Asp And Repair To Wooden Furniture Including Polishing To Wooden Furniture At 54 Asp Af Stn Gurgaon Under Ge (Af) Gurgaon No 1., Gurgaon-Haryana

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us