|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Provn of 1300Rm chain link fencing front side of unit location and MES colony of 65 Med Regt and Provn of 05 x desert cooler and Spl rep to street light timer switch at Mil Stn Kapurthala under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in conc or brick masonary and making good disturbed ground complete all as specified and directed. |
| 3 | Dismantling fencing barbed wire, any type, any size complete all as specified and directed. |
| 4 | Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out , returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in soft/loose soil complete all as specified and directed. |
| 5 | M&L for cmenet concrete type C-2 1:3:6 (40mm graded agg) as in foundation filling and mass concrete complete all as specified and directed. |
| 6 | M&L for steel round bars Fe-410 -W (Gde E-250) 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 7 | S&F of MS screw bolts (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal / square nuts exc 10 cm and n.exc 15mm, dia of neck 5 to 10mm complete all as specified and directed. |
| 8 | Supply only galvanised Iron hot dipped chain link fencing, any size or type complete all as specified and directed. |
| 9 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 10 | M&L for applying two coats of synthetic enamel paint on preparation of newly steel surfaces over a coat of zinc chromate primer any description over 10 cm width of girth not otherwise described complete all as specified and directed. |
| 11 | M&L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc;and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 12 | S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc; complete all as specified and directed. (Each line to be measured separately) |
| 13 | S&F of digital street light timer panel factory made of rating 40A, conforms to IS/IEC 60947-4-1, provided with protection degree IP 54, extended wide band coil, FRLS (Fire retardant low smoke) internal wiring, In-built short-circuit protection, class H Insulation including 40Amps TP MCB 'B' Curve, 10 KA, 415V and Time switch with contactore TPN 40 A, 'C' curve, 10 KA, 415V including selector switch complete all as specified and required. |
| 14 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :- (a) One socket outlet 3 Pin, 5 Amp on independent board complete all as specifed and directed. |
| 15 | S&F of switch piano flush type single pole one way 6 Amp complete all as specifed and directed. |
| 16 | S&F of socket out let 2 in 1, 3 pin 5 Amp flush type complete all as specifed and directed. |
| 17 | Supply, Installation and testing of Desert Cooler electric driven (Single phase) as per followoing specification:-Size of Desert Cooler:- L x b x h 660 x 660 x 825 mm (26\\" x 26\\" x 32.5\\") ApproxBody:- (i) steel body Top cover and pillars of 18 SWG (1.20 mm) thick GI sheet (ii) Side panels of 20 SWG (1.00 mm) GI Sheet (iii) Tank Height7\\" made of 18 SWG (1.20 mm) GI Sheet (iv) Front grill and directional grill of GI sheet. (v) Including required iron stand made up of 40 mm angle iron as directed.Fan Motor:- (i) Exhaust fan motor should be copper winding, 500 mm sweep cooler fan, double ball bearing, three speed (High/Medium/Low) with methalic blade duly painted with snthetic anti corrosive oven cured paint fitted to body Fan motor.(ii) Input Cap 200 watt(approx), speed 1400 RPM, 230 Volts, 50 Hz, air delivery 5000/6000 Cum/HrsSubmersible Pump Motor:- Input Cap 40 watt (Approx), speed 1300 RPM, 230 volts, 50 Hz.Switches/Regulator:- One piano switch and one speed selector switch (Regulator) 04 position for controll of pump motor and fan motor respectively will be provided on the body.Pads:- Wood wool Pads of proper Thickness will be provided in each panel (Set of three).Drain Plug:- Brass drain plug shlall be provided from pump motor to three panel fitted on the cooler body.Cord:- Flexible cord PVC Shethed and Insulated size 40/0.25 mm (1.5 Sqmm) 3 core (as per IS 694/1977) length 5 Mtr long with three pin 5 Amp ISI marked bakelite plug Top shall be provided for power supply to cooler.Note:- (i) All Desert cooler should be fitted on first floor or second floor minium height is 8 mtr (ii) Contrctor should be provide all sefty material for worker for installation of desert cooler (iii) Contrator should be submitted 01 year Guarntee/Waranty of Desert Fan motor and submersibale pump Motor. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
