|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand not exc 4 sqm and removing from site. |
| 3 | Taking down shutter of any description area exc. 1 Sqm and n.exc. 2 Sqm and removing from site. |
| 4 | Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles. |
| 5 | Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness. |
| 6 | Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion. |
| 7 | Demolition of Stone slabs and tiles of any description or thickness of floors, aprons etc. laid, bedded and pointed in any mortar |
| 8 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. |
| 9 | Pressed steel frames of size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 10 | Pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 11 | Preparing of new untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge. |
| 12 | Factory made, 2nd class hard wood, plain framed, Double/Single paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick, complete all as specified and directed. |
| 13 | 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed. |
| 14 | Powder coated aluminium frame work (min thickness of powder coating 50 micron) for doors, windows, ventiltors and partition, (sliding/openable/fix doors, windows, ventilator), etc with one, two or more rebates (reqd as per site), section weighing not less than 0.55 kg/m, including joining cleat for fixing with dash fasteners of required dia and size, incl filling up gaps at junctions, ie top, bottoms and sides etc, complete all as specified and directed. |
| 15 | Powder coated aluminium window and ventilator shutters, sliding/openable/fixed (as per required at site) type without sash bar, alu section weighing 0.55 kg/m, including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc, complete all specified and directed. |
| 16 | Aluminium powder coated door shutters (sliding/openable/fixed (as per required at site), aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc, complete all specified and directed. |
| 17 | Aluminium anodised grill 6m thick fixed to aluminium window with and including 'H' type aluminium frames of size 34mm x 11mm, complete all as specified and as directed. |
| 18 | Double action floor spring hudraulically regulated made up of min 1.25mm thick alluminium alloy sheet foundation box, main body with stailess steel cover governing pivot made of brass other made of mild steel heavy duty, complete all as specified and directed. |
| 19 | M&L Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples fixing in doors and windows, complete all as specified and directed. |
| 20 | S&F for sheet glass plain/coloured (as per directed by Engr-in-charge) 5.5 mm thick best quality and glazing with rubber packing, screws or glass putty in squares exc 0.5 Sqm each pane, complete all as specified and directed. |
| 21 | PCC 1:2:4 type B-1 (20mm graded crushed stone aggregate) 25mm thick as in sub base for floors, complete all as specified and directed. |
| 22 | Extruded aluminium alloy handles fabricated type anodised of size 125mm long, complete all as specified and directed. |
| 23 | MS 300 mm ordinary rat rails rod pattern door springs including roller and roller plate, complete all as specified and directed. |
| 24 | Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm, complete all as specified and directed. |
| 25 | 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 26 | 200mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and directed. |
| 27 | Brick work with sub class “B” bricks straight or curved on plan exc 6m mean radius built in CM 1:6 using old size brick, complete all as specified and directed. |
| 28 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed. |
| 29 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement mixed with Water proffing compound, complete all as specified and directed.Note: WPC shall be measured and paid separately. |
| 30 | Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including two coat of white wash on ceiling including preparation of surface, complete all as specified and directed. |
| 31 | Supply only Liquid water proofing compound. |
| 32 | Taking down existing cement plaster of any description over damaged surfaces irregular facia, chajjas and in similar work and also for narrow widths etc, rendering dubbing coat 15mm thick cement plaster in CM (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even ( avg 50mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate shall be provided wherever required) followed by 05mm thick rendering in CM (1:3) finished even and smooth complete all as specified and directed including two coats of cement base paint over a coat of primer over new plaster surface including preparation etc complete.(after curing of specified time and drying the surfaces as required). |
| 33 | Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces. |
| 34 | Complete removal of existing treatment including preparing old plastered surfaces of walls and applying two or more coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Over a coat of wall care putty 3mm thick, complete all as specified and directed. |
| 35 | Preparation of newly plastered surfces of walls and applying two or more coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Over a coat of wall care putty 3mm thick, complete all as specified and directed. |
| 36 | Preparing new plastered surfaces of walls and applying acrylic smooth exterior paint of required shade (two or more coat applied @ 1.67ltr/10Sqm over and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm), complete all as specified and directed. |
| 37 | Complete removal of existing treatment including preparing old plastered surfaces of walls and applying acrylic smooth exterior paint of required shade (two or more coat applied @ 1.67ltr/10Sqm over a and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm), complete all as specified and directed. |
| 38 | Preparation of newly plastered surfaces of Ceiling and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick, complete all as specified and directed. |
| 39 | Complete removal of existing treatment including preparing old plastered surfaces of Ceiling and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick, complete all as specified and directed. |
| 40 | Preparing of old untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide primer, complete all as specified and directed. |
| 41 | Machine cut kota stone flooring 18-22 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) (Each stone not less than 55 cms x 55 cms) over and including 15mm thick screed bed in CM (1:4) as in floor, complete all as specified and directed. |
| 42 | Machine cut kota stone slab 18-22mm thick in skirting, dado and pillars, risers of steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) over and including 15 mm thick rendering in CM (1:4) including taking out of existing dado, complete all as specified and directed. |
| 43 | PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in benching, coping etc and similar items including weathering slightly rounded or chamfered angles and throating on top of roof, chajjas, rails, cills etc. including necessary formwork, complete all as specified and directed. |
| 44 | PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection (75mm thick) finished even and fair, complete all as specified and directed. |
| 45 | RCC 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in chajjas, shelves and similar items, complete all as specified and directed. |
| 46 | 75mm thick precast reinforced cement concrete slab 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) set in CM (1:4), including necessary formwork, complete all as specified and directed.NOTE : Reinforcement shall be measured and paid for separately. |
| 47 | Form work to chajjas, shelves, troughs and similar items including edges for rough finished surfaces of concrete, complete all as specified and directed. |
| 48 | Form work to edges of concrete flats RCC/PCC band exc 5 cm but exc 10 cm for fair finished surfaces of concrete, complete all as specified and directed. |
| 49 | TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed not less then 0.90mm dia, complete all as specified and directed. |
| 50 | Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed. |
| 51 | Stainless steel Kitchen sink without drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 495mm X 420mm with bowl size 410mm X 330mm X 160mm fixed in repairs, complete all as specified and directed. |
| 52 | 20 to 25mm external dia drapery rods stain less steel with incuding designer lattos and brackets all as specified and approved by Engr In charge including taking out old pelmet box with curtain rods, complete all as specified and directed. |
| 53 | Tubular towel rail, Brass chromium Plated 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 54 | Soap dish of cast copper alloy, chromium plated (CP), fixed as in repair complete all as specified and directed. |
| 55 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 56 | PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and as directed. |
| 57 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 58 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 59 | Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.. |
| 60 | Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 20mm thick screed bed in CM 1:6 (Pattern as directed by Engineer-in-charge), complete all as specified and directed. |
| 61 | Glazed, coloured, ceramic, tiles of size (350mm x 250mm x 7mm/ 300mmx450mmx7mm thick), on vertical surfaces, such as skirting, dadoes, etc set and jointed in neat cement slurry and pointed in coloured cement to match with the surface over and including 15mm thick screed in CM 1:4 complete all as specified and directed. |
| 62 | 100mm long butt hinges (medium weight) colled rolled mild steel fixed with welding. |
| 63 | Rotational moulded polyethene water storage tank 1000 ltr capacity three layer white in colour hoisted and fixed in position including PVC float valve 20 mm bore and including dismantling of existing water storage tank, complete all as specified and directed. |
| 64 | Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections, including cleaning for re-fixing or removal to store complete all as specified and directed . |
| 65 | All as per item srl No-64 above but 20mm bore complete all as specified and as directed. |
| 66 | 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified and directed. |
| 67 | Refixing of old steel tubing 15mm dia and connections in new or old position (wall, ceiling, floor etc.) complete all as specified and directed. |
| 68 | 20 mm dia steel tubing medium grade, galvanized with all fitting such as bend, elbow, socket, tees, and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed. |
| 69 | Refixing of old steel tubing 20mm dia and connections in new or old position (wall, ceiling, floor etc.) complete all as specified and directed. |
| 70 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed. |
| 71 | Shower rose brass chrominium plated 125mm size complete all as specified and directed. |
| 72 | 15mm bore fancy type bib tap brass CP (Long body) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs complete all as specified and as directed. |
| 73 | Cast copper alloy CP angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe, fixed in repairs complete all as specified and as directed. |
| 74 | 15 mm dia wall Bend mixer brass chromium plated fixed to existing pipe/connections including telephonic hand shower with all necessary fittings fixed in repairs, complete all as specified and directed. |
| 75 | Wash basins, vitreous china white of oval shape counter top, excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed in repairs complete all as specified and directed. |
| 76 | 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and directed. |
| 77 | Vitreous china squatting pan “ORISSA” pattern size 630mm x 450mm (Make : Hindware) white with integral foot rests including cast iron ‘P’ or ‘S’ trap 100mm bore complete fixed in repairs, complete all as specified and directed. |
| 78 | Vitreous China Urinal, full stall type, white with PTMT waste fitting, PVC waste pipe, brass CP urinal spreader including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with including 60mm long brass screws fixed in repairs, complete all as specified and as directed |
| 79 | Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’ or 'P' trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc fixed in repairs, complete all as specified and directed (including making good to floor) |
| 80 | PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and and fixing arrangement fixed in repairs, complete all as specified and directed. |
| 81 | PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 82 | Dismantling cast-iron/PVC pipes and fittings including taking out of trenches or walls as required dia of pipe upto 100mm, complete all as specified and directed. |
| 83 | PVC (SWR) pipes Type A single socketed in any length with rubber ring joints fixed to walls for 110mm bore. |
| 84 | PVC (SWR) pipes Type A single socketed in any length with rubber ring joints fixed to walls for 75mm bore. |
| 85 | PVC (SWR) Bends any radius for 110mm bore pipe. |
| 86 | PVC (SWR) Bends any radius for 75mm bore with oval access door. |
| 87 | 75mm dia PVC(SWR) floor trap with grating including jointing with solvent cement |
| 88 | 125/110mm dia PVC(SWR) floor trap with grating including jointing with solvent cement |
| 89 | Demolition of cement or lime concrete of any description along with tarfelt treatment in sunken portion / roof and cement mortar bedding from roof removal rubbish out side MD land complete all as specified and directed. |
| 90 | 10 mm rendering in CM 1:4 including water proofing compound @3% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified.Note: WPC to be measured and paid separately. |
| 91 | M&L for water proofing treatment to sunken portion / roof etc. in following sequence:- (i) Properly cleaning and drying the surface.(ii) Applying a coat of bitumen primer @ 1.2Kg/Sqm and primer shall be allowed to dry over night.(iii) Laying APP base modified water proofing membrane of weight not less than 3kg per sqm and thickness not less than 3 mm, with 100mm overlaps, sealed and bonded to the surface by 'torchon' method.(iv) Applying two coat of bituminous based aluminum painting @ 0.15 kg/Sqm each coat on water proofing treatment with preparation of surfaces complete all as specified and directed at site. |
| 92 | PCC 1:2:4 type B-0 (12.50mm graded crushed stone aggregate) as in padding finished even and smooth without using extra cement all as specified and directed. |
| 93 | 600mm x 450mm size beveled edge mirror of 6mm thick selected quality mounted on 6mm thick plywood with chromium plated screws with washer fixed in repairs, complete all as specified and directed. |
| 94 | Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or reinforced concrete) and set in cement mortar, complete all as specified and directed. |
| 95 | Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 150mm bore pipe, complete all as specified and as directed. |
| 96 | Salt -Glazed stoneware drain pipes 150 mm dia laind in trenches and jointed, complete all as specified and directed. |
| 97 | Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe complete all as specified. |
| 98 | 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with providing 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed. |
| 99 | 50 mm dia GI tubing heavy class galvanised laid over floors as a spout pipe in sunken floors, complete all as specified and directed. |
| 100 | Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit, complete all as specified and as directed. |
| 101 | Taking down ceiling fan any sweep, cleaning the fan completely for dust and dirt, rewinding,oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 102 | Taking down ceiling fan any sweep, cleaning the fan completely for dust and dirt, rewinding,oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
