|
| 1 | Dismantling of spindle hoist , central drive unit , rope drum , rack and pinion and winch machine at site complete in all respect |
| 2 | Supply of central panel control volt 110 at site complete in all respect |
| 3 | MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Four Pole 50, 63amp. (10kA, Curve-C) |
| 4 | Providing, installation & fixing of three phase contractor with automatic switch of fuse complete in all respects of entire satisfaction of engineer incharge |
| 5 | Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of engineer incharge (iii) 6 mm wide |
| 6 | Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of engineer incharge (iii) 8 mm wide |
| 7 | Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of engineer incharge (iii) 10 mm wide |
| 8 | Providing and fixing galvanized nuts and bolts of all sizes and lengths required |
| 9 | Providing Gun Metal Bush Assembly |
| 10 | Removing Assembling and fixing in position of GM bush complete in all respect and to entire satisfaction of engineer in charge |
| 11 | Hiring charges of crane 35 tonne |
| 12 | Providing and fixing SS Nuts and bolts of all sizes and lengths required |
| 13 | Supply of Multipurpose synthetic Grease |
| 14 | Supply of multigrade Mobile oil |
| 15 | Supply of High Speed Diesel |
| 16 | Supply of Gear oil |
| 17 | Providing LED Light of standard reputed company with minimum 2 year warranty (20 watt) |
| 18 | Steel work fitted independently without connecting plates including cutting, hoisting and fixing in position (b) flats |
| 19 | Removing, Providing, & fixing Bearing bracket, complete in all respects. |
| 20 | Removing & fixing Bearing, complete in all respects. |
| 21 | Removing ,Providing insatallation& fixing in position EM Brake at site complete in all respects and to entire satisfaction of engineer-in-charge |
| 22 | Providing of bulb seal and fixing in position including preperation of surface complete in all respects and to entire satisfaction of engineer in charge |
| 23 | Removing Damaged old rubber seal bulb or flat including clamp plate of all sizes and types |
| 24 | Overhauling of gate mechanism of all types including dismantling, greasing, oiling and re-installation of mechanism complete in all aspects. (b)more than 10 feet – up to 30 feet width of Gate |
| 25 | Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm)with DA gray paint on the existing surface with the help of MS angle ironsupport (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- (i) Cable Tray Size 150mm x 50mm x 50mm (2mm thick) |
| 26 | Providing, installation & fixing in position of Limit Switches 30 Amp capacity H.D. At site complete in all respects and to entire satisfaction of engineer-in-charge |
| 27 | Supply and Installation of Variable Frequency Drive |
| 28 | Rewinding of 3 Hp 900 rpm 3 phase induction motor with bearing grease with cooling fan and ball bearing 6205 NBC 2 nos |
| 29 | Supply of Chequered plate |
| 30 | Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer - in - charge (c) Overall size 2.5sq.mm (50/0.25mm), 3Core |
| 31 | Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer - in - charge (c) Overall size 4sq.mm (56/0.3mm), 3Core |
| 32 | Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-Overall size 25 sq.mm (4Core) Armoured |
| 33 | Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-Overall size 35 sq.mm (4Core) Armoured |
| 34 | Supply and fixing of O type worm reduction wear box at site complete in all respects |
| 35 | Any Other Items Please Enable Macros to View BoQ information |
