|
| 1 | Dismantling of structural steel work of any description, complete all as specified and directed. |
| 2 | S&F steel work as in tubular trusses/ purlin/ rafter etc complete using ERW or induction butt welded tubes conforming to IS-1161(1979) grade ST-240, complete all as specified and directed. |
| 3 | S&F pre painted galvalume aluminum zinc based semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old sheet of any description, complete all as specified and directed. |
| 4 | S&F pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling of old sheet of any description, complete all as specified and directed. |
| 5 | S&F pre painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of approved colour (multi colour pattern as approved by GE) having tensile strength of 550 Mpa as in roof bent to a curve of any radius as directed by GE fixed with self tapping screws including side end lap as per manufacture's instructions, and dismantling of old sheet of any description, complete all as specified and directed. |
| 6 | M&L for 25mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate stone aggregate) as in sub base for tilling including demolition of PCC, complete all as specified and directed. |
| 7 | M&L for glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:3, after dismantling old unserviceable of tiles and screed bed, complete all as specified and directed. |
| 8 | M&L for non skid ceramic coloured tiles size 400 x 400 x 7 to 8 mm thick, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and incuding 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles and screed bed, complete all as specified and directed. |
| 9 | M&L for vitrified coloured tiles size 600 x 600 x 8 to 10 mm thick, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and incuding 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and directed. |
| 10 | M&L for non skid ceramic coloured tiles size 600 x 600 x 7 to 8 mm thick, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and incuding 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and directed. |
| 11 | M&L for 16 to 18mm thick granite stone slab (of any type) work (table rubbed and polished) in cooking platforms, in steps, pillars, window cills, etc, laid over 15mm thick beddinf in cement mortar 1:4, including pointing in white cement 1:2 using marble dust with admisture of pigment to match the shade of granite slab, rounding edges etc after dismantling old unserviceable of granite stone slab of any size and screed bed, complete all as specified and directed |
| 12 | M&L for machine cut kota stone slab (mirror polished) florring 15-18mm thick as in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab inlcuding machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and inlcuding screed bed or bedding layer of 15mm thick in cement mortar 1:4 of any size after dismantling old unserviceable of Kota Stone of any size and screed bed, complete all as specified and directed. |
| 13 | M&L for machine cut kota stone slab (mirror polished) 15mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab inlcuding machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and inlcuding rendering of 20mm thick in cement mortar 1:4 after dismantling old unserviceable of skirting and plastering, complete all as specified and directed. |
| 14 | Demolition of brick work or stone / boulder or concrete block masonry including all quoins, arches, pillars, etc. built in cement mortar, complete all as specified and directed. |
| 15 | M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 16 | M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and directed. |
| 17 | All as per Item No 15.00 here-in-before but except bricks. Note: Bricks retrieved from item No 14 will be re-used. |
| 18 | M&L for walling of random rubble, uncoursed, well bounded, bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed. |
| 19 | All as per Item No 18.00 here-in-before but except stone. Note: Stone retrieved from item No 14 will be re-used. |
| 20 | Extra over stone walling for hammer dressing to face stone and dressing of face beds with maximum depression on face from straight edge held against the dressed surface on sand stone n.exc 20mm, complete all as specified and directed. |
| 21 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 22 | M & L for Rendering 10 mm thick on fair faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement, complete all as specified and directed. |
| 23 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:4 on external brick work or concrete surfaces , finished even and smooth without using extra cement including mixing with liquid WPC all as per manufacturers instructions, complete all as specified and directed. |
| 24 | M & L for rendering 5mm thick in cement mortar (1:3) on soffits of slabs, chajja etc finished even and fair without using extra cement, complete all as specified and directed. |
| 25 | M&L for rendering 20 mm thick on stone walls other than fair faces in CM (1:6), finished even and smooth without using extra cement, complete all as specified and directed. |
| 26 | M&L for geo-textile wire mesh having 0.9mm dia of wire and 20mm mesh to prevent cracks or joints before plaster work in wall, ceiling and cornices, complete all as specified and directed. |
| 27 | M&L for preparation of new plastered wall surface including cornices etc and applying two coats of exterior emulsion weather coat paint of Apex Ultima of ASIAN or equivelent make of approved colour (multi colour pattern as approved by GE) over and including a coat of primer, complete all as specified and directed. |
| 28 | M & L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whitening, complete all as specified and directed. |
| 29 | M & L for preparation of new plastered surfaces of walls and applying two coats of emulsion plastic paint ready mixed colour by machine to achieve the required colour over one coat of approved priming coat, complete all as specified and directed. |
| 30 | M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 31 | M&L for applying 2mm thick wall care putty on walls/ ceilings to obtain a smooth surface including surface preparation and making good any undulations on the surfaces, complete all as specified and directed. |
| 32 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 but not exceeding 4.0 sqm each including making good disturbed surface, complete all as specified and directed. |
| 33 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) including making good disturbed surface, complete all as specified and directed. |
| 34 | Taking down shutters of any description exceeding 1.0 but not exceeding 2.0 sqm each, complete all as specified and directed. |
| 35 | S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for doors with double rebates including necessary fixing lugs, hinges, lock strike plates, holdfast and filling the frame with PCC 1:2:4 etc, complete all as specified and directed. |
| 36 | All as per Item No 35.00 here-in-before but frame size of 105x60mm single rebate. |
| 37 | M&L for 2nd class hard wood well seasoned plain solid straight chowkhat framed wrought framed, rebated on the solid, round or chamfered put together with glue and pinned at joint and fixed in wall, complete all as specified and directed |
| 38 | S&F for 35mm thick 2nd plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed. |
| 39 | S&F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, Part-I (Specifications), complete all as specified and directed. |
| 40 | M&L for factory made 100% Solid WPC Door Frame 125mm x 65 mm double Rebated made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of (Min 990 N), Minimum Compressive Strength of 58 N/mm2 , Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water/ Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and lenght, complete all as specified and directed. Note: Material test certificate and authentication shall be compulsory provided by the manufacturing company. |
| 41 | M&L for factory made 100% Solid WPC Door Frame 90mm x 45 mm single Rebated made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ), Minimum Compressive Strength of 58 N/mm2 , Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and lenght, complete all as specified and directed. Note: Material test certificate and authentication shall be compulsory provided by the manufacturing company. |
| 42 | M&L for factory made 30mm thick 100% solid WPC laminated moulded/skeleton door shutter of required size comprising of virgin PVC resin of K value 57-60 (suspension grade), Calcium Carbonate and natural fibers (Wood Powders/rice husk/wheat husk) and Non toxic additivel, made from extrusion process WPC foam sheet Single Extruded (inner) with having minimum density not less than 650 Kg/Cum, an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer free water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 1 microns thick of approved design pasted on both faces of shutter and fixing stainless butt hinges required size with necessary full body threaded star headed counter sunk SS Screrews, complete all as specified and directed. Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 43 | S&F box type steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 44 | All as per Item No 43.00 here-in-before but without glazing bars. |
| 45 | S&F Box type steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 46 | S&F Box type steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded, complete all as specified and directed. Please Enable Macros to View BoQ information |
