|
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviveable tiles to store and rubbish off the premises complete all as specified and directed |
| 2 | Coloured vitrified ceramic tiles, 10mm thick (square / rectangular) , area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 3 | Coloured vitrified ceramic tiles, 7 to 8mm thick (square / rectangular) , area of each tiles n.exc 0.36 sqm, as in skirtring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 10mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 4 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 5 | Glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 6 | Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar including disposal of demolished material complete all as specified and directed. |
| 7 | 14-16 mm thick, baroda green stone, machine cut laid over & including 15mm thick average thicknesss) cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with grout of matching shade on kitchen plateform, RCC Counters , stairs , window sill and similar situation like incl making hole for gas pipe including moulding of edges and polishing complete all as specified & directed |
| 8 | Demolition of reinforced cement concrete in roofs, floors (other than ground floor), beams, staircase, landing, chajjas, shelves and similar suspended work, including cutting of reinforcement to facilitate demolition and removal of debris , complete all as specified and directed. |
| 9 | Reinforced cement concrete type A-1, 1:1½:3 (nominal mix, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed (reinforcement shall be measured and paid for separately). complete all as specified and directed. |
| 10 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed. |
| 11 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, lndings and similar work sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter , all as specified and directed. |
| 12 | Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed. |
| 13 | Taking down chowkhats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame, complete all as specified and directed. |
| 14 | Taking down shutters of any description exceeding 1Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in same opening(s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed. |
| 15 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm and removing to store complete all as specified and directed. |
| 16 | Factory made pressed steel frames of profile width 125mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including filling of PCC 1:3:6 complete all as specified and directed. |
| 17 | Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including filling of PCC 1:3:6 complete all as specified and directed. |
| 18 | Factory made second class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed. |
| 19 | 30mm thick flush shutters, solid core costruction, with block board core and plywood face panels, commercial type on both sides etc. complete all as specified and directed. |
| 20 | Glazed and gauged skeleton shutter (Factory made) 30mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated,complete all as specified & directed. |
| 21 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 22 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge |
| 23 | Factory made solid PVC board 18-20mm thick, density of 550 Kg/Cum as in cup board shelf/door of shelf, dag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free, complete all as specified and directed. |
| 24 | factory made solid PVC moulded door 18-20mm thick and density of 550 kg/Cum as in kitchen cabinet, shelves, shutter with 19mm wide PVC leeping pasted at exposed sides, sag free thermal and electrically insulated, light weight wrap free, impect resistant, free resistant, termite resistant, chemically resistant and smell free, complete all as specified and directed. |
| 25 | 100 mm size butt hinges medium weight cold rolled stainless steel complete, all as specified and directed. |
| 26 | butt hinges 100mm Extruded aluminium alloy with galvanised mild steel hinge pin, anodized, fixed type C-21 for PVC door, complete all as specified and directed. |
| 27 | 100mm hasp and staple,aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 28 | 200 mm size aluminium , barrel tower bolt of extruded section complete all as specified and directed. |
| 29 | 150 mm size aluminium , barrel tower bolt of extruded section complete all as specified and directed. |
| 30 | 150mm aluminium alloy handle fabricated type , complete all as specified and directed. |
| 31 | Aluminum alloy, anodized, sliding door bolt 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. |
| 32 | 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, including welding on chowkhat complete all as specified and directed. |
| 33 | Continuous (piano) hinges, mild steel bright finish, width of flap when open 30mm, as in repair complete all as specified and directed. |
| 34 | Factory made steel window box type with side hung shutters including box type hinges and one shop coat of red oxide primer, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete with glazing bars, dovetailed or welded fixed with and including MS flat of suitable size for fixing grills and guards bars etc as in repairs, complete all as specified and directed. |
| 35 | Factory made steel window box type with side hung shutters including box type hinges and one shop coat of red oxide primer, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete without glazing bars, dovetailed or welded fixed as in repairs, complete all as specified and directed. |
| 36 | Ventilator with glazing bar including dismantling & removal from site complete all as specified and directed. |
| 37 | Galvanised mild steel wire cloth 0.56 mm nominal dia of wire & avg width of aperture 1.18 mm in fixed with tinned tacks, complete all as specified and directed. |
| 38 | Hacking out old broken glass (any thickness, size, quality or description) from wooden, metel frames including punching or drilling out glazing pins/spring clips complete all as specified and directed. |
| 39 | 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 40 | 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes, including hacking out old broken glass complete all as specified and directed. |
| 41 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; manhole cover; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe 165-0, as in repair all as specified and directed. |
| 42 | Two coats of synthetic enamel paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. |
| 43 | Two coats of synthetic enamel paint on steel and iron surfaces on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. |
| 44 | Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed. |
| 45 | Applying one coat of synthetic enamel paint on steel and iron surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified & directed. |
| 46 | Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 47 | Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified & directed . |
| 48 | Brick work using old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 49 | All as per item No 48 above above but except bricks, complete all as specified & directed |
| 50 | Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed. |
| 51 | Dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in CM 1:4 complete all as specified and directed. |
| 52 | 5mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces) finished even and smooth without using extra cement, complete all as specified and directed. |
| 53 | Rendering 15mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. |
| 54 | Rendering 15mm thick in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed. |
| 55 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed. |
| 56 | Three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed |
| 57 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 58 | two coats of white wash on ceiling surfaces including preparation of old plastered surfaces complete all as specified and directed |
| 59 | Material and labour for preparation of old plastered or un-plastered surfaces of walls and applying one coat of cement base paint, over a coat of tint complete all as specified and directed. |
| 60 | Material and labour for preparation of old decorated wall surfaces and applying two coats of oil bound distemper complete all as specified and directed. |
| 61 | Two coat of white wash on wall surfaces including preparation of old surfaces complete all as specified and directed. |
| 62 | Demolition of cement concrete unreinforced exceeding 15cm thickness of any description and in any postion (in suken portion) not other wise specially provided for and removal unserviceable materials, debris and rubbish outside MOD land all as specified & directed by Engineer-in-charge. |
| 63 | Plain cement concrete 1:5:10 type E-2 using 40mm graded crushed brick aggregate as in sunken filling and mass concrete complete all as specified & directed. |
| 64 | Water proofing treatment to sunken portion and adjoining walls of kitchen, WC, Bath & Toilet, etc, as follows, complete all as specified & directed :- (a) 15 mm thick plaster in cement mortar (1:3) mixed with WP compound as per manufacturer's instructions shall be provided on sunken portion after roughening of surfaces. (b) Apply cement slurry to the surface @ 0.488 kg /Sqm of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sqm and the surface will be allowed to air cure for 4 hours.(c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours.(d) Pond curing of sunken portion for minimum of 48 hours.(e) Paste one layer of 3mm thick APP membrance with bitumen by torch application to the the treated sunkensurface.(f) Joints/ traps /WC /soil pipes shall be properly sealed with approved sealing compound. |
| 65 | Repair in Cast iron floor trap 100mm, include for hacking out cement joints or burning out lead joints with grating and jointing to waste pipe and necessary connection upto first manhole fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed. |
| 66 | Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with waste coupling, angle brackets, PVC connection 15mm size, 450mm long, PVC waste pipe, fixed as in repair complete all as specified and directed. |
| 67 | Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed. |
| 68 | Vitreous China Wash down water closet (pedestal pattern) , white, (excluding, flushing cistern and flush pipe) with and including PVC seat cover, complete all as specified and directed. |
| 69 | PVC valve less syphonic action type flushing cistern, low level white in let ball valve, float and handle including brackets, fixed as in repair complete all as specified & directed. |
| 70 | PVC connections 15 mm size with PTMT nuts of length 450 mm , fixed as in repair complete all as specified and directed. |
| 71 | Towel rail 600mm long of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed. |
| 72 | Towel ring of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed. |
| 73 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, complete all as specified and directed. |
| 74 | Grating doom 100mm dia of PTMT, fixed to floor trap with cement mortar 1:3, fixed as in repairs, complete all as specified and directed. |
| 75 | Looking mirror of size 600mmx450mm of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs, fixed as in repairs,complete all as specified and directed. |
| 76 | Plate rack of stainless steel sheet 1.0mm thick of size 600mmx 600mm with steel shelves and hanging arrangements for utensil, fixed as in repairs, complete all as specified and directed. |
| 77 | Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm x 203mm, with bowl of size 405mm x 354mm x 203mm incl fixing cantilever brackets, fixed as in repairs, complete all as specified and directed. |
| 78 | Taking up or down steel tubing and connections 15mm bore, complete all as specified and directed. |
| 79 | Taking up or down steel tubing and connections 20mm bore ,complete all as specified and directed. |
| 80 | 15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed. |
| 81 | Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning ,complete all as specified and directed. |
| 82 | 20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 83 | Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning, complete all as specified and directed. |
| 84 | 16 mm (outer dia) CPVC pipes, SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors, complete all as specified. |
| 85 | 20 mm (outer dia) CPVC pipes, SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors, complete all as specified. |
| 86 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed. |
| 87 | Bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 88 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 89 | Stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 90 | Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, fixed as in repair complete all as specified and directed. |
| 91 | Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed |
| 92 | Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair, complete all as specified and directed |
| 93 | 25mm dia stainless steel curtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed. |
| 94 | Demolition and breaking up PVC (SWR), cast iron, AC, SWG soil waste and vent pipe of 75/110mm bore including accsessories set in cement mortar, removing rubbish from site complete all as specified and directed. |
| 95 | Cast iron soil, waste and vent pipes 75mm in any length eith or without ears, with cement joints, laid in renches or in floors/walls, complete all as specified & directed |
| 96 | Cast iron soil, waste and vent pipes 110mm in any length eith or without ears, with cement joints, laid in renches or in floors/walls, complete all as specified & directed |
| 97 | Supply and fixing in repair CI Bends for 75mm bore pipes /diminishing pueces or tapers (larger bore measured), complete all as specified & directed |
| 98 | Supply and fixing in repair CI Bends for 100mm bore pipes /diminishing pueces or tapers (larger bore measured), complete all as specified and directed. |
| 99 | PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed. |
| 100 | 110mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed |
| 101 | PVC (SWR) pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to wall including clamp, fixed as in repair complete all as specified and directed. |
| 102 | PVC (SWR) bends any radius 75mm dia with oval acess door, fixed as in repair complete all as directed. |
| 103 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed. |
| 104 | Material and labour for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring, finished fair and even, without using extra cement complete all as specified and directed. |
| 105 | Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar complete all as specified & directed. |
| 106 | Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed. |
| 107 | PCC 1:2:4 type B-1 (20 mm graded stone aggs) as in roof padding, roof kerbs rounded or chamfered on edges complete all as specified and directed. |
| 108 | APP based polymeric membrane 3mm thick minimum weighing 3.0kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid primed surface by torch application on and including bituminous primer @0.40L/ per Sqm, complete all as specified & directed. |
| 109 | Cement concrete tile of size 250 mm x 250 mm x22 mm with grey cement and no pigment and including 15 mm thick cement plaster 1:4, screed bed or floor finished, complete all as specified & directed. |
| 110 | Raking out joints/ pointing in cement mortar to brick work in walls or to bricks on brick tiles, laid flat, in floor, surface channels, roofs, etc to receive PCC top surface complete all as specified and directed. |
| 111 | Rendering 20mm thick rendering in CM 1:4 plaster on surface including flashings and junction of parapets, etc, and adjoin vertical surface and applying bituminous primer @ 0.40 ltrs per square meter including APP based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid on primed surface by torch application & applying one coat of bituminous aluminum paint @100gm/sqm on top of membrane, complete all over as specified and directed.Note: rates are applicable up to 4 story building for item Nos 102 to 110 |
| 112 | Supply only liquid water proofing compound complete all as specified & directed. |
| 113 | Supply and fixing float valve / ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms ) for 20mm bore pipe, fixed as in repair complete all as specified and directed. |
| 114 | 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, (ISI Marked) hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed. |
| 115 | Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning works etc and hoisting if required reconnecting and refixing in position of capacity exc 250 ltrs but n.exc 500 ltrs, complete all as specified & directed. |
| 116 | Nahani traps 75mm including of hacking out cement joint or burning out lead joints with grating jointing to waste and necessary connection upto first manhole fixed in cement concrete type B-1 1:2:4 fixed as in repair complete all as specified and directed. |
| 117 | Nahani traps 100mm including of hacking out cement joint or burning out lead joints with grating jointing to waste and necessary connection upto first manhole fixed in cement concrete type B-1 1:2:4 fixed as in repair complete all as specified and directed. |
| 118 | PVC (SWR) floor trap 75/100mm including of hacking out cement joint or burning out lead joints with grating jointing to waste and necessary connection upto first manhole fixed in cement concrete type B-1 1:2:4 fixed as in repair complete all as specified and directed. |
| 119 | PVC (SWR) multi floor trap 75/100mm including of hacking out cement joint or burning out lead joints with grating jointing to waste and necessary connection upto first manhole fixed in cement concrete type B-1 1:2:4 fixed as in repair complete all as specified and directed. |
| 120 | PVC (SWR)gully trap 125/110mm including of hacking out cement joint or burning out lead joints with grating jointing to waste and necessary connection upto first manhole fixed in cement concrete type B-1 1:2:4 fixed as in repair complete all as specified and directed. |
| 121 | Demolition of RCC any type 15cm thickness bellow or above ground level floor upto 4 storey and disposing the demolished materials upto a distance of 200mtr complete all as specified & directed by Engineer-in-charge. |
| 122 | Demolition of RCC exc 15cm thickness above ground level floor upto 4 storey such as RCC water tanks, staircase, landing, chajjas etc and disposing the demolished materials upto a distance of 200mtr complete all as specified & directed by Engineer-in-charge. |
| 123 | Cleaning and clearing of blockage from any type of WCs (Indian/European), trap & Cl pipe line upto 1st manole manually by rodding, pumping etc (including taking off manhole covers and re-fixing the same after cleaning) of any description, underground and at any depth by removing any type of blockage including de-silting and de-chocking (Sludge/sludge water shall be disposed off at authorized dumping site declared by local administration outside MD land complete all as specified and as diretted by the Engineer-in-charge. |
| 124 | All as per serial item No 123 herein before but from Floor / Nahni trap of Kitchen / Bathroom upto gully trap (excluding gully trap). |
| 125 | All as per serial item No 123 herein before but from gully trap up to first manhole. Note :- for Sr item no 2 to 4:-(i) Rate quoted in the above items includes cost of T&P like rods, bamboos and other safety devices etc complete.(ii) Contractor shall deploy sufficient no of persons as per requirement.(iii) Complaint shall be rectified within same day on receipt of complaint. A penalty of Rs. 250/- per complaint per day will be levied to contractor if the complaint is not cleared with 24 hrs |
| 126 | Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook incl making connections and fixed in repair, complete all as specified and directed. Please Enable Macros to View BoQ information |
