|
| 1 | M&L for Demolition of precast concrete block walling, dressed stone work built in cement mortar complete all as specified and directed. |
| 2 | M&L for Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all asspecified and directed. |
| 3 | M&L for Cement concrete type D-2 1:4:8 (40mm graded aggregate) in foundations, filling,sub base and mass concrete complete all as specified & directed by Engr-in-charge. |
| 4 | M&L for Stone Masonary Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and directed. |
| 5 | M&L For Providing precast cement concrete in window or doorcills, lintels, bressumers, steps, quoin blocks (for use with masonry),string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any sectionindicated), with plain fair faces, including chamfers, weatherings, throat- ing etc., type B-1 (1:2:4) using 20 mm graded stone aggregates and setting in cement mortar 1:4 complete with joints to match concrete complete all as specified and directed. |
| 6 | M&L for Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and as directed by Engr-in- Charge. |
| 7 | S&F PVC (SWR) pipe, 75mm dia (ISI marked) in any length embedded in cement mortar for weep holes at locations complete all as specified and as directed by Engr-in-Charge. |
| 8 | M&L For Raised pointing to random or polygonal rubble stone Masonry, uncoursed or brought upto courses, in cement mortar 1:3 complete all as specified and as directed by Engr-in-Charge. |
| 9 | M&L for factory made Pre-cast cement concrete as in block masonry with solid blocks, Type C-1 , 1:3:6 (20 mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 10 | M&L for rendering 15 mm thick faces of brick work or stone masonry or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement incl addition thickness provided as floating/setting coat including mixing only water proofing compound as per manufacturer's instructions on external walls complete all as specified and as directed. |
| 11 | Supply only Integral water proofing compound(liquid), complete all as specified and as directed by Engr-in-Charge. |
| 12 | M&L For Cement concrete Type C2 1:3:6 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed. |
| 13 | M&L for Extra for forming fair finished drain or channel above 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed. |
| 14 | M&L For Providing precast cement concrete in window or doorcills, lintels, bressumers, steps, quoin blocks (for use with masonry),string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any sectionindicated), with plain fair faces, including chamfers, weatherings, throat- ing etc., type B-1 (1:2:4) using 20 mm graded stone aggregates and setting in cement mortar 1:4 complete with joints to match concrete complete all as specified and directed. |
| 15 | M&L for 250 mm thick PQC work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, as per design mix and laid in bays to required gradient & camber incl form work/ bull nosing, rounding of edges, curing etc. complete all as specified and directed. |
| 16 | M&L for Forming 12 mm thick Expansion joints for thickness of concrete slab 150 mm, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’, for 200-250 mm thick slab complete all as specified and directed.Note:- The sealant shall conform to IS-5818 and MAV of + 30% with 10 years warranty. |
| 17 | M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide (using diamond cutter), filled with sealing compound grade 'B' complete all as specified and as directed.Note:- The sealant shall conform to IS-5818 and MAV of + 30% with 10 years warranty. |
| 18 | M&L for Finishing surface of concrete roads, pavements, by brooming complete all as specified and directed. |
| 19 | Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 20 | M&L for Dismantling Stone slabs and tiles of any description, interlocking paver block laid and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 21 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub-base to flooring & apron etc. complete all as specified and directed. |
| 22 | M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 23 | M& L for Factory made, Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed. Please Enable Macros to View BoQ information |
