|
| 1 | Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exc 400 sqm exc 50mm and n exc 100 deep complete all as specified and directed. |
| 2 | M & L for 75 mm thick (compacted thickness) WBM with broken stone coarse aggregate (lime stone/sand stone/flint/quartzite etc.) of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with a power roller, 8 to 12 tonnes to form a true surface complete all as specified and as directed. |
| 3 | M&L for applying evenly a priming/tack coat with bituminous primer (Paving bitumen) VG -10 @ 10 Kg per 10 Sqm on unsurfaced water bound macadam including preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed. |
| 4 | M & L for repair to potholes any depth not exc 1 sqm each in area including sweeping from dust & mud or water securing sunken surfaces in roads etc cutting around edges to at least 25mm in depth but making good by filling in screened & graded road metal, watering and well rammed (including supply of premixed macadam, binder and chippings/ road metal) depth of potholes exc 30mm complete all as specified & directed. |
| 5 | M&L for premix bituminous, macadam using with paving bitumen VG-30 of any penetration of consolidated thickness n.exc 75mm with 4% binder content by weight of total mix, laid & rolled and compacted to required gradient and camber with 8 to 10 tonne power roller complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat with bituminous primer Paving bitumen) VG-10 @ 5 kg per 10 sq metre on black top surfaces complete all as specified and directed. |
| 7 | M&L for Providing Bituminous premixed carpet,30 cm consolidated thickness,with 0.41 cu.m. of stone chippings (0.28 cum of 12.5 mm size and 0.13 cum of 10mm size mixed with 21.9 kg of binder paving bitumen VG-30, rolled and compacted with vibratory roller and compacted with with 8 to 10 tonne power roller to required camber and applying Premixed sand seal coat with 0.06 cu.m. of sand mixed with 6.8 kg of bitumen VG-30 per 10 Sqm, applied and rolled to a uniform smooth surface complete all as specified and directed. |
| 8 | M & L for Preparing bituminous surface of road and laying hot applied thermoplastic compound (paint) of approved color conforming to BS3262-1989 with special applicator machine, 2.5mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T & P etc required for proper completion of work incl all other charges. The finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No 803 as per IRC. Painting lines, dashes, arrows, letters etc on roads, pavements and the like n exc 10cm wide with road marking paint white, golden or yellow complete all as specified and as directed. |
| 9 | Supply & fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed. |
| 10 | Supply and fix in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. |
| 11 | Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all asspecified and directed. |
| 12 | Demolition of precast concrete block walling, dressed stone work built in cement mortar complete all as specified and directed. |
| 13 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all asspecified and directed. |
| 14 | M&L for Cement concrete type D-2 1:4:8 (40mm graded aggregate) in foundations, filling,sub base and mass concrete complete all as specified & directed by Engr-in-charge. |
| 15 | M&L for factory made Pre-cast cement concrete as in block masonry with solid blocks, Type C-1 , 1:3:6 (20 mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 16 | M&L for Stone Masonary Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and directed. |
| 17 | M&L for Walling (except stone) of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work etc. complete all as specified and directed. |
| 18 | M&L For Providing precast cement concrete in window or doorcills, lintels, bressumers, steps, quoin blocks (for use with masonry),string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any sectionindicated), with plain fair faces, including chamfers, weatherings, throat- ing etc., type B-1 (1:2:4) using 20 mm graded stone aggregates and setting in cement mortar 1:4 complete with joints to match concrete complete all as specified and directed. |
| 19 | M&L for Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and as directed by Engr-in- Charge. |
| 20 | S&F PVC (SWR) pipe, 75mm dia (ISI marked) in any length embedded in cement mortar for weep holes at locations complete all as specified and as directed by Engr-in-Charge. |
| 21 | M&L For Raised pointing to random or polygonal rubble stone Masonry, uncoursed or brought upto courses, in cement mortar 1:3 complete all as specified and as directed by Engr-in-Charge. |
| 22 | Dismantling Stone slabs and tiles of any description, interlocking paver block laid and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 23 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub-base to flooring & apron etc. complete all as specified and directed. |
| 24 | M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 25 | M& L for Factory made, Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed. |
| 26 | Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 27 | M&L for Precast reinforced cement concrete 1:2:4 (Nominal mix) type B-1, using 20mm graded crushed stone aggregates landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves, fins and similar articles with plain faces including all mouldings but excluding frame, set in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge. |
| 28 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 29 | Taking down old cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed by Engr-in-Charge. |
| 30 | M&L for rendering 15 mm thick faces of brick work or stone masonry or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement incl addition thickness provided as floating/setting coat including mixing only water proofing compound as per manufacturer's instructions on external walls complete all as specified and as directed. |
| 31 | Supply only Integral water proofing compound(liquid), complete all as specified and as directed by Engr-in-Charge. |
| 32 | M&L for preparing newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 33 | M&L For Cement concrete Type C2 1:3:6 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed. |
| 34 | Extra for forming fair finished drain or channel above 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
