|
| 1 | M&L for earth work in excavation in any type of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil complete all as specified and directed. |
| 2 | All as per item No 1.00 here in before but exceeding 1.5m deep and not exceeding 3m deep complete all as specified and directed |
| 3 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm with excavated soil complete all as specified and directed. |
| 4 | Removing excavated material soils, not exc 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed. |
| 5 | Demolition and breaking up drain pipes of 150mm internal dia of bore SGSW, AC or reinforced concrete pipe set in cement mortar complete all as specified and directed. |
| 6 | Demolition and breaking up drain pipes of 200mm internal dia of bore SGSW, AC or reinforced concrete pipe set in cement mortar complete all as specified and directed |
| 7 | Demolition and breaking up drain pipes of 300mm internal dia of bore SGSW, AC or reinforced concrete pipe set in cement mortar complete all as specified. |
| 8 | M&L for 150 mm bore dia Reinforced concrete pipes Class NP 3 pipes laid and jointed with collar complete all as specified and directed. |
| 9 | Supplying, laying in trenches, jointing and testing salt glazed stoneware pipe grade 'A' drainpipe 150mm bore conforming to IS at any depth over PCC bed, jointed with cement morter 1:3 complete all as specified & directed. |
| 10 | Supplying, laying in trenches, jointing and testing salt glazed stoneware pipe grade 'A' drainpipe 200mm bore conforming to IS at any depth over PCC bed, jointed with cement morter 1:3 complete all as specified and directed. |
| 11 | M&L for 200mm bore dia Reinforced concrete pipes Class NP 3 pipes laid and jointed with collar complete all as specified and directed. |
| 12 | M&L for 300mm bore dia Reinforced concrete pipes 300 mm bore of pipe, class NP3, laid, jointed and tested with collars complete all as specified and directed. |
| 13 | M&L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and directed. |
| 14 | M&L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and directed. |
| 15 | M&L for PCC (1:3:6) type C-2 using 40mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 300 mm bore complete all as specified and directed. |
| 16 | M&L for RCC (1:2:4) nominal mix type B-1 using 20mm graded stone aggrtegate as in precast cover slabs of drains, cover slabs of manholes and similar articles and setting in CM 1:6 including necessary form work and demolition etc complete all as specified and directed. |
| 17 | M&L for MS TMT bars 6 to 8 mm and over dia and cut to lenth, bent to shape required incl cranking bending spirally for hooping for clos hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia. |
| 18 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed. |
| 19 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed. |
| 20 | Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 300 mm dia of pipe complete all as specified and as directed |
| 21 | Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed. |
| 22 | M&L for brick work with sub class 'B' bricks in CM (1:4) straight or curved on plan exc 6 mtrs mean radius, complete all as specified and directed. |
| 23 | All as per Ser Item No 22.00 here in before but except bricks complete all as specified and directed.Note-Serviceable bricks obtained under Srl item No. 21.00 shall be reused after cleaning, washing etc. |
| 24 | M&L for 15mm thick cement plaster in Cement motar1:4 on fair faces of brick or concrete work and finishing the surface even and fair (without using extra cement) incl WPC @3% weight of cement etc. complete all as specified and directed.Note - WPC will be measured and paid separately under appropriate items |
| 25 | Supply only water proofing compound complete all as specified. |
| 26 | M&L for PCC (1:3:6) type C-2, using 40mm graded stone aggregate as in foundation of manhole etc complete all as specified and directed. |
| 27 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in cills, PCC blocks, coping,haunching and benching bed plates, seismic and other similar bands, plinth bends, etc including weathering slightly rounded or chamfered angles and throuting, inclusing necessary form work etc complete all as specified and directed |
| 28 | M&L for cleaning/taking out sludge/mud/silt from any size of manhole and sewage pipe line by Honeysucker machine including dewatering of manhole , septic tank and sewage line when ever is required including removing of sludge/muds/silt/liquid to outside MD land complete all as specified and as directed by Engineer-in-charge. Note : Honeysucker machine including all required T & P items shall be provided by the contractor. The cost of the same shall be deemed included in unit rates quoted and nothing extra shall be admissible on this account. |
| 29 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. |
| 30 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches ,110 mm bore complete all as specified. |
| 31 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches,75 mm bore complete all as specified. |
| 32 | S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed. |
| 33 | S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed. |
| 34 | S&F, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 35 | S&F, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 36 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 37 | S&F PVC (SWR) gully trap 125 x 110 mm setting and jointing with solvent cement complete all as specified and directed |
| 38 | Mechanized cleaning and disinfection of Water Storage Tank with following step :- 1. Mechanized Dewatering of water storage tank. 2.Removal of sluge lyng on the bottom ofwater storage tank through special sludge pumps. 3.Cleaning of internal walls of water storage tank through High Pressure rotary Jets 4.Vaccum cleaning of the floor of water storage tank through industrial vaccum cleaners. 5.Spray of H2 O2 inside the tanks as an antibecterial agent. 6. UV radiation of the tank. 7.Spray of bleaching powder in prescribed quantity after final cleaning of the tank.8. writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed. |
| 39 | (a) 500 ltr capacity |
| 40 | (b)1000 ltr capacity |
| 41 | (c) 2000 ltr capacity |
| 42 | Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 500 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed. |
| 43 | Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 1000 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed. |
| 44 | Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 2000 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed. |
| 45 | Supplying, Hoisting and fixing in repairs 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) & fixing arrangement for inlet/outlet/over flow and vent pipe of standard size including taking down old water storage tank all as specified in SSR Part-I including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 46 | Supplying, Hoisting and fixing in repairs 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) & fixing arrangement for inlet/outlet/over flow and vent pipe of standard size including taking down old water storage tank all as specified in SSR Part-I including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 47 | Supplying, Hoisting and fixing in repairs 2000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) & fixing arrangement for inlet/outlet/over flow and vent pipe of standard size including taking down old water storage tank all as specified in SSR Part-I including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 48 | S&F, in repair, 15mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) |
| 49 | S&F, in repair, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight -210 Gms) |
| 50 | S&F, in repair, 25mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight -455 Gms) |
| 51 | S&F, in repair, 40mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight -455 Gms) |
| 52 | S&F, in repair, HDPE water storage tank lid black (with arrangement for locking for 500 litres capacity tank complete all as specified and directed. |
| 53 | S&F, in repair, HDPE water storage tank lid black (with arrangement for locking for 1000 litres capacity tank complete all as specified and directed. |
| 54 | S&F, in repair, HDPE water storage tank lid black (with arrangement for locking for 2000/5000 litres capacity tank complete all as specified and directed. |
| 55 | Taking down or taking up steel water tubing , galvanised from trenches / walls / floors including all fittings, segregatting and stacking the serviceable pipes and fittings properly at site for re-use all as specified and directed for following bore of pipe : |
| 56 | (a) 15mm dia |
| 57 | (b) 20mm dia |
| 58 | Fixing only old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed. |
| 59 | Fixing only old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed. |
| 60 | S&F steel water tubing galvanised ,medium grade with all fittings and fixed complete to walls , or in floors, in old/new situation for bore of pipe following sizes: - |
| 61 | (a) 15mm dia |
| 62 | (b) 20mm dia |
| 63 | Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors incl all necessary fittingscomplete all as specified and directed. |
| 64 | Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including all necessary fittings complete all as specified and directed. |
| 65 | S&F steel water tubing galvanised ,medium grade with all fittings and fixed complete to walls , or in floors, in old/new situation for bore of pipe following sizes: - |
| 66 | (a) 15 mm bore. |
| 67 | (b) 20 mm bore. |
| 68 | S&F in repair tank connector 20 mm bore complete all as specified and directed. Please Enable Macros to View BoQ information |
