|
| 1 | LT/HT line shifting at Pilibhit byepass road barrier-2 to Settelite bus stand road widening area (EUDD-1) Part-BSupply and errection of 11 meter long P.C.C., 1/6 over all length of pole grouted in cement concrete with 1:3:6 (cement concrete) of pole 30cm above the ground levels including excavation, back filling etc. rates includes all materials, labour, T&P etc. required for proper completion of the work as per E/I . AR/2018 |
| 2 | Supply and fixing of cross arm 100x50x6mm 1.50 mt long for over head line (A/R) |
| 3 | Supply and errection of \\"D\\" clamps of 50mmx6mm flat iron on steel tubular poles/steel rail poles with bolts, nuts, etc. complete in all respects including painting with aluminium paint (S.I.623/2018) |
| 4 | S/F of straight MS channel 75x40 mm size (5.7 kg / mt.) 2.24 mt. long for guarding with two nos. 11x116 mm eye bolts etc all complete. AR/2019 |
| 5 | S/F of stay set at least 3.5 mtr. Away from the pole complete with GI 19 mm dia. & 1.80 long stay rod 30 cm. x 63 cm. Anchor plate thimble stay clamp, stay insulator, 19x600 mm. double screw tightner, 7/8SWG GI stay wire etc in 1:3:6 cement concrete & grauting as per direction of E/I. S.I.No-631/18 |
| 6 | S/F of danger Board complete with clamps, bolts & nut complete in all respect as per direction of E/I. S.I 1109/18 |
| 7 | S/F of 2.5mt. long 20mm dia MS earth rod with 6 SWG GI earth wire, nut, bolt & washer etc all complete.AR/2019 |
| 8 | S/F 11 KV pin insulator with on steel poles or any where specified including bolts to fasten the pole cap/cross arm with the pole. AR SI.No 13.10 CPWD 2018 |
| 9 | S/F OF 11KV Disc insulator with gun fitting for fixing on cross arms /clamps to be fixed on poles including all bolts nuts , washer etc. (insulator not less than 41KMN) for proper completion of the work. AR SI.No 13.11 CPWD 2018 |
| 10 | Painting of electric pole with two coat of aluminum paint over red oxide primer etc all complete SIN-634/18. |
| 11 | S/E of over head line with suitable size ACSR conductor on pole including binding etc all complete SIN-627/18.(i) ACSR Dog. |
| 12 | S/f of hexagonal/cradle type guard and 4 to 8 SWA G.I. wire including binding etc. complete in all respect. (S.I. 629/2018) |
| 13 | Supply and erection of over head line with G.I. Wire no 8 to 4 SWG on poles/ serivce bracket including binding etc. Complete in all respects (S.I. 628/2018) |
| 14 | Supply & fixing of 250 KVA transformer 11/.44 kv 3 star rating. Complete in all respect (As per uppcl cast schedule 2018-19)PVSR |
| 15 | 11/.433 KV,63 KVA Transformer- Supply Installation and Commissioning of 63 KVA, 11/0.433 KV Transformer including loading, unloading, local carriage with all material, labour, Whose GTP Approved in MVVNL having valid CPRI/ERDA type test report] |
| 16 | S/F of 11 KV T.P.M.O of with D.O. fuse set complete in all respect. AR ( As per UPPCL cost sehedule 2018-19 ) |
| 17 | S/F of 11 Kv lighterning arrestor (comprising of 3 units) complete with base short with G.S. strip. AR (S.I. No.13.13 CPWD 2018 ) |
| 18 | Supply and making suitable earthing of neutral/bodly of /T/F/D.P/ACB/Lightening arrestor with 900x900x6.3mm G.I plate burried vergically below 6 meter G.L. 8 upto water level 7/10 SWG G.I. stay wire complete with all material, labour T&P etc.. (S.I. 702)/2018 |
| 19 | S/O of 185 sq mm. 3 core 11 KV garde XLPE cable (Grandly/Polycab/ICC or other same category) at a depth of 1.2 to 2.00 mt below ground level complete as direction & approved by E/I. Analysis Rate |
| 20 | L.T LINE Supply and laying of 120 Sqm x 3core +95Sqm+1x16SSqm ABC insulated cable with messenger wire complete in all respects |
| 21 | S/F Suspension clamp insulated complete in all respects. AR/2018 |
| 22 | S/F of dead end clamp complete in all respects AR/ 2018 |
| 23 | S/F of eye bolts/ hooks complete in all respects AR/2018 |
| 24 | S/L of 16Sqm single core XLPE cable insulated complete in all respects AR/2018 |
| 25 | Supply and errection of 9meter long tubler pole SP 32, 1/6 over all length of pole grouted in cement concrete with 1:3:6 (cement concrete) of pole 30cm above the ground levels including excavation, back filling etc. rates includes all materials, labour, T&P etc. required for proper completion of the work as per E/I . (S.I. 613/2018) |
| 26 | Supply and errection of 8.5meter long P.C.C pole SP 32, 1/6 over all length of pole grouted in cement concrete with 1:3:6 (cement concrete) of pole 30cm above the ground levels including excavation, back filling etc. rates includes all materials, labour, T&P etc. required for proper completion of the work as per E/I . (S.I. 613/2018) |
| 27 | S/L of L.T. armored cable at depth of 75cm below ground level a caution of 75mm thick sand alround and protected with bricks on sides and top and crossing of the road cable shall run through 150mm dia hume pipe complete in all respects of following size from transformer to distribution pillar and distribution piller to O.H. linea-400 Sqm 3½ core (S.I. 501 t) /2018 |
| 28 | Supply and erection of plan/pin type cable socket (lugs) of the cable leads insulating with tape and connections etc.a-400 Sqm (S.I. 504 o) / 2018 |
| 29 | S/M of out door push on type cable jointing kit suitable for 185 sq. mm XLPE cable make M seal/cab seal etc complete SI No. 10.5.3 cpwd/2018 17166 x100/113=15191 |
| 30 | S/M of Straight Through cable jointing kit suitable for 185/240 sq. mm XLPE cable make M seal/ Raychem and its equvalent per direction of E/I. SI No. 10.9.2 cpwd/2018 (56325 X 100/113 =49845.13) |
| 31 | S/F of \\"B\\" class of 150 mm dia G.I. pipe with M.S clamp nuts & bolt complete in all respect as per direction of E/I.SI No. 14.13.4 cpwd/2018 (1687x100/113=1492.00) |
| 32 | S/F of 0.60x0.30x0.15 mtr. Distribution box made of 16Sqm sheat with painting including 200 Amp aluminium bus bar TPN complete in all respects. AR/2018 |
| 33 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as SI no 12.42 CPWD/2018 ( 2221x100/113) =1965 |
| 34 | Trenchless boring with more than 2 mtr and upto 6mt below ground level by machine technology including o\laying of 33000 V HT cable 150mm Sqm to 400 Sqmmm size with proper completion f the work. As per per direction of E/I. |
| 35 | 120 mm HDPE pipe by machine technology including o\cost of T&P, Labour and all required material suitable for laying of 11000 V HT cable 150mm Sqm to 400 Sqmm size with proper completion f the work. As per per direction of E/I. |
| 36 | Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.SI no 12.40 CPWD/2018 (73x100/113) =64 |
| 37 | Construction of t/f PLINTH OF SIZE (2.0X1.5X1MT) With all materials required for proper completion of thr work A/R as per UPPWD schedule 2018 |
| 38 | Supply and erection of 11 mt long tublur pole SP 55, 1/6 over all length of pole grouted in cement concrete with 1:3:6 (cement concrete) of pole 30cm above the ground levels including excavation back filling etc rates includes all materials labour Please Enable Macros to View BoQ information |
