|
| 1 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature). |
| 2 | Inverter Type - Cooling Only |
| 3 | 1.5 TR with 5 star BEE rating |
| 4 | 2.0 TR with 5 star BEE rating |
| 5 | Providing & fixing of additional refrigerant copper piping (6.3 mm/15.88mm) or (6.3 mm/12.7 mm) suitable for suction & discharge line i/c additional refrigerant R-32 /R-410 A top-up as required with 6/9 mm XLPE/Nitrile insulation with PVC tape on surface /recessed with clamps, screws etc from indoor tooudtdoor units as standard specifications complete as required |
| 6 | Providing & fixing Unplasticized Polyvinyl Chloride (uPVC) pipes, having thermal stability for cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer In Charge. Internal Work - Exposed on Wall |
| 7 | 25 mm |
| 8 | Providing & fixing of suitable size and type ready made iron wall/floor mounting bracket stand duly painted for ODU w/o canopy |
| 9 | Providing & fixing of suitable size and type ready made iron wall/floor mounting bracket stand duly painted for ODU i/c canopy made 25 x 3 mm angle frame with fibre Aluminium sheet with VI pad, Nut-bolt, washers etc for outdoor unit complete as required. |
| 10 | Suplly, laying, testing and Commissioning of approved make FRLS PVC/ XLPE insulated Power / Control copper cable of on surface / recessed complete as required. |
| 11 | 4 core x 2.5 sq mm |
| 12 | Providing & fixing of single phase plug top ISI marked for AC unit etc i/c dismantling old plug top if any complete as required. |
| 13 | 3 pin - 16 Amp. (PVC) |
| 14 | Providing, laying & fixing of rein forced fibre flexible / soft PVC pipe of size given below etc. complete as required |
| 15 | Up to 16 mm |
| 16 | Supply and fixing PVC/UPVC minin trunking (casing -caping) & flexible conduit of following size white - system with independent cover etc. as reqd. |
| 17 | Trunking 20 x 12 mm |
| 18 | Steel Flexible Conduit 20 mm |
| 19 | Supply & Installation of DLP trunking 105 x 50 mm without cover and partition /accessories etc. |
| 20 | Supply & fixing of following accessories suitable for 105 mm x 50 mm size plastic trunking white system |
| 21 | flexible cover 85 mm |
| 22 | Internal Angle |
| 23 | External Angle |
| 24 | End Cap Please Enable Macros to View BoQ information |