|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and as directed by Engr-in-Charge. |
| 2 | Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in hard/dense soil, complete all as specified and as directed by Engr-in-Charge. |
| 3 | Returning,filling in ,including spreading,levelling ,watering and well ramming in layers not exe 25cm in hard/dense soil, complete all as specified and as directed by Engr-in-Charge. |
| 4 | Removing excavated material n, exe 50m and depositing where directedat a level n, exe 1.5 m above the starting point, complete all as specified and as directed by Engr-in-Charge. |
| 5 | M&l for PCC type D-2(1:4:8) using 40mm graded crushed stone aggregate as mass conc and filling of foundation, complete all as specified and as directed by Engr-in-Charge. |
| 6 | M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge. |
| 7 | M&L for reinforced cement concrete 1:2:4, nominal mix (20 mm graded Aggregate) as in beam cantilevers, bressummers, lintels over 1.5 m span, complete all as specified and as directed by Engr-in-Charge. |
| 8 | M&L form work for rough finished concrete surfaces to sides and soffits of floor or roof beam ,beam haunchings ,girders, bresum-mers,lintles,cantilevers,shelves including supports ,overhanging, etc. also splays between floors and beams,etc, complete all as specified and as directed by Engr-in-Charge. |
| 9 | Mild steel TMT bars 10mm dia and over (for tie bar of chain link fencing), cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Engr-in-Charge. |
| 10 | All as per srl item No 9 above but 6 to 8mm dia as in stirups, complete all as specified and as directed by Engr-in-Charge. |
| 11 | M&L Hardcore with boken stone of gauge n exc 63 mm, deposited, spread and levelled and layer n exc 15 cm thick, water and rolled /rammed to a true surface, complete all as specified and as directed by Engr-in-Charge. |
| 12 | M&L for Cement concrete type D-2,1:4:8 (40mm graded crushed stone aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings etc, complete all as specified and as directed by Engr-in-Charge. |
| 13 | M&L PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) 75mm thick sub base of floor etc, complete all as specified and as directed by Engr-in-Charge. |
| 14 | M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded crushed stone aggregate as plinth protection finished even and smooth with out using extra cement, complete all as specified and as directed by Engr-in-Charge. |
| 15 | M&L Forming Contraction (Dummy) joints 50 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection, complete all as specified and as directed by Engr-in-Charge. |
| 16 | M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded crushed stone aggregate as in floors including finishing the surface rough for laying finishes, complete all as specified and as directed by Engr-in-Charge. |
| 17 | M&L Non-Skid ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over 20 mm screed bed or bedding layers in cement mortar 1:6 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match, complete all as specified and as directed by Engr-in-Charge. |
| 18 | M&L for Glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick rendering CM (1:4) in dado/skirting tiles, complete all as specified and as directed by Engr-in-Charge. |
| 19 | S&F 2nd class hard wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and as directed by Engr-in-Charge. |
| 20 | S&F for 35mm thick 2nd class hard wood plain framed paneled shutters (two panels) with panels with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces and fixed to chowkats , complete all as specified and as directed by Engr-in-Charge. |
| 21 | S&F for 30mm thick 2nd class hard wood plain framed factory made glazed and skeletion window/ventilator shutters , open rebated and prepared to receive glass , gauze etc (without sash bars) edges of framing plain , chamfered or rounded fitted with cut and mitred beds for securing glass etc size of members of shutters as specified in SSR part I, Section 8 , clause 8.24(a) supplied and fitted to chowkats , complete all as specified and as directed by Engr-in-Charge. |
| 22 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane, complete all as specified and as directed by Engr-in-Charge. |
| 23 | S&F Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed by Engr-in-Charge. |
| 24 | M&L Preparation of New untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer, complete all as specified and as directed by Engr-in-Charge. |
| 25 | S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 , complete all as specified and as directed by Engr-in-Charge. |
| 26 | Material & labour PCC (1:3:6) type C1 (using 20 mm graded crushrde stone aggregate) as in hold fast , bed block and like , complete all as specified and as directed by Engr-in-Charge. |
| 27 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and as directed by Engr-in-Charge. |
| 28 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and as directed by Engr-in-Charge. |
| 29 | S&F mild steel butt hinges, medium weight cold rolled 100mm size, complete all as specified and as directed by Engr-in-Charge. |
| 30 | S&F mild steel butt hinges, medium weight cold rolled 75 mm size, complete all as specified and as directed by Engr-in-Charge. |
| 31 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and as directed by Engr-in-Charge. |
| 32 | S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and as directed by Engr-in-Charge. |
| 33 | S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and as directed by Engr-in-Charge. |
| 34 | M&L for 10mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 35 | M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 6, complete all as specified and as directed by Engr-in-Charge. |
| 36 | M&L for preperation of new plastered wall surface of any description and applying three coat of white wash , complete all as specified and as directed by Engr-in-Charge. |
| 37 | M & L for two coat of cement base paint on newly plastered surfaces including preparation of surfaces, complete all as specified and as directed by Engr-in-Charge. |
| 38 | S & F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to FE-410 - W(grade E-250) quality 'A' , complete all as specified and as directed by Engr-in-Charge. |
| 39 | M&L preparation of newly untreated steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed by Engr-in-Charge. |
| 40 | Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge. |
| 41 | S&F PVC (SWR) 75mm bore Pipe single socketed in any length with rubber ring joints laid in trenches, complete all as specified and as directed by Engr-in-Charge. |
| 42 | S&F PVC (SWR) 75mm bore Pipe single socketed in any length with rubber ring joints fixed to wall, complete all as specified and as directed by Engr-in-Charge. |
| 43 | S&F PVC (SWR) 110mm bore Pipe single socketed in any length with rubber ring joints laid in trenches, complete all as specified and directed. |
| 44 | S&F CI floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4, 100mm dia, complete all as specified and as directed by Engr-in-Charge. |
| 45 | S&F 110mm bore PVC (SWR) bends (any radius), complete all as specified and as directed by Engr-in-Charge. |
| 46 | S&F PVC (SWR) vent cowl 75mm, complete all as specified and as directed by Engr-in-Charge. |
| 47 | Stack clamp out of 25mm x5mm flat iron stays including bolt and nuts and securing ends of stays to walls or roof for 100mm bore piece, complete all as specified and as directed by Engr-in-Charge. |
| 48 | S&F viterous China squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern), complete all as specified and as directed by Engr-in-Charge. |
| 49 | S & F towel rail 600mm long of CP fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min Wt 190 Gms), complete all as specified and as directed by Engr-in-Charge. |
| 50 | S&F 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe, complete all as specified and as directed by Engr-in-Charge. |
| 51 | S&F sand cast iron 'P' or S trap 100mm bore for indian type w/c, complete all as specified and as directed by Engr-in-Charge. |
| 52 | S&F viterous China urinal half stall type white including CP spreader, waster pipe etc, complete all as specified and as directed by Engr-in-Charge. |
| 53 | S&F Vitreous china urinal partition white of size 310x700 mm, complete all as specified and as directed by Engr-in-Charge. |
| 54 | S & F Vitreous China wash basin Fency type pedestal pattern , white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and as directed by Engr-in-Charge. |
| 55 | Supply & Fixing sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12 cm wide with chromium plated bracket gourd and railing 60 cm long, complete all as specified and as directed by Engr-in-Charge. |
| 56 | S&F 32mm dia waste coupling of PTMT (Half or ful threaded) 45 grams, complete all as specified and as directed by Engr-in-Charge. |
| 57 | S&F chromium plated soap dish any type fixed to plugs with brass screws, complete all as specified and as directed by Engr-in-Charge. |
| 58 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with cromium plated brass screws and cup washers, complete all as specified and as directed by Engr-in-Charge. |
| 59 | S&F 20mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule, complete all as specified and as directed by Engr-in-Charge. |
| 60 | S&F 20mm bore chromium plated angular stop cock with wall flange, complete all as specified and as directed by Engr-in-Charge. |
| 61 | S&F PVC connection 15mm bore with ptmt nuts of length 450mm, complete all as specified and as directed by Engr-in-Charge. |
| 62 | S&F 15mm bore CP wash basin mixer for mixing hot & Cold water copper alloy fancy type high pressure screwed for iron pipe , complete all as specified and as directed by Engr-in-Charge. |
| 63 | S&F 15mm bore chromium plated Bib tap cast copper alloywith crutch or butterfly handle screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed by Engr-in-Charge. |
| 64 | S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge. |
| 65 | S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge. |
| 66 | S&F 25mm bore stop valves chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule, complete all as specified and as directed by Engr-in-Charge. |
| 67 | S&F 25mm bore brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule, complete all as specified and as directed by Engr-in-Charge. |
| 68 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity , hoisted and fixed in position all as specified in SSR Part I, complete all as specified and as directed by Engr-in-Charge. |
| 69 | M&L for Cement concrete type B-2,1:4:8 (40mm graded crushed stoneaggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings etc, complete all as specified and as directed by Engr-in-Charge. |
| 70 | M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments layed over 20mm thick cement screed base (1:6), complete all as specified and as directed by Engr-in-Charge. |
| 71 | M&L cement concrete Grade M10- Type C0,1:3:6 (12.5mm graded aggregate) in Damp proof course, complete all as specified and as directed by Engr-in-Charge. |
| 72 | M&L PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) 100mm thick sub base, complete all as specified and as directed by Engr-in-Charge. |
| 73 | M&L for Non skid ceramic jointless/joint free coloured tiles 7 to 8 thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredcement to match over and including 15mm thick screed bed in cement mortor (1:6), complete all as specified and as directed by Engr-in-Charge. |
| 74 | M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 75 | Supply only integral liquid water proofing compound, complete all as specified and as directed by Engr-in-Charge.Make : Pidilite/Sika |
| 76 | S & F Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device, complete all as specified and as directed by Engr-in-Charge. |
| 77 | S&F PVC (SWR) 'S or P', trap of 110 mm bore, complete all as specified and as directed by Engr-in-Charge. |
| 78 | S&F PVC (SWR) Nahani trap of 110 mm bore, complete all as specified and as directed by Engr-in-Charge. |
| 79 | S & F in repairs, 40mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams), complete all as specified and as directed by Engr-in-Charge. |
| 80 | S & F 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed by Engr-in-Charge. |
| 81 | S & F fancy type 15 mm bore angle Stop valves, chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions., complete all as specified and as directed by Engr-in-Charge. |
| 82 | S&F PPR 25 MM Gate Valve (Brass insert) as per requirement of the site, complete all as specified and as directed by Engr-in-Charge. |
| 83 | S&F looking mirror in required rectangular shape bevelled edge 5mm thick selected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washers, complete all as specified and as directed by Engr-in-Charge. |
| 84 | S&F grating doom 100mm dia of PTMT (Minimum wt 25 grm) , complete all as specified and as directed by Engr-in-Charge. |
| 85 | Supply and fixed Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet rainfored with M S Square tube, suppling & fixing in opening as per specification and drg, complete all as specified and as directed by Engr-in-Charge. |
| 86 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by Engr-in-Charge. |
| 87 | S&F anodised aluminium frame for doors, window , ventilators with one or more rebates incl joining cleat for fixing etc , complete all as specified and as directed by Engr-in-Charge. |
| 88 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and as directed by Engr-in-Charge. |
| 89 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane, complete all as specified and as directed by Engr-in-Charge. |
| 90 | S&F Structural steel works as in tubular roof trusses, purlins, Rafter, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, cleats , riveting incl bending and welding, conforming to FE – 410W Gde E - 250 quality A , complete all as specified and as directed by Engr-in-Charge. |
| 91 | S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary, gusset plates, cleats, MS Flat, MS plate, rivetting etc n.exc 10 kg each brackets, conforming to FE 290 Gde E-165, complete all as specified and as directed by Engr-in-Charge. |
| 92 | M&L for soak well/soak pit of dia 3.00 mtr internal at top and depth of 1.80 mtr from botton having min 2.45 mtr height 380 mm thick random rubble uncoarsed stone masonary wall in CM 1:6 with 150 mm thick PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) below stone masonary at Bottom and RCC coverslab using Design mix concrete M-25 or 1:1.5:3 nominal mix with reinforcement 10 mm dia bars @ 150mm C/C both ways top and bottom layer of concrete including arrangement for manhole opening and manhole cover, inlet for 100/150 mm dia pipe connected with existing manholes including dismantling and filling of existing soak well/soal pit and make a true surface complete all as specified as per Drg No. CESZ/TD-1078/2011 sheet 1/1Note :- The rate includes excavation in hard/dense soil and construction of soak well as per drawing, connection of inlet pipe, 100 mm dia PVC vent pipe with cowel, returning and filling and removing of surplus soil to a distance exc 50 mtr but not exc 100 mtr from site. If any issues regarding drawing finalized by Engr in Charge during execution. |
| 93 | Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded FRLS PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead, complete all as specified and as directed by Engr-in-Charge for the followings:- |
| 94 | One light/exhaust fan point controlled by one way switch |
| 95 | One switch socket outlet 6 Amps, 230 volts point on Same board |
| 96 | One switch socket outlet 6 Amps, 230 volts point on independent board |
| 97 | All as item No 93 above, but using cables 4 Sq mm size , complete all as specified and as directed by Engr-in-Charge. |
| 98 | Supply and fix of lamp holder insulated body with back plate, complete all as specified and as directed by Engr-in-Charge. |
| 99 | Supply and fix of Switch piano flush button single pole 6 Amps 230 volts one way, complete all as specified and as directed by Engr-in-Charge. |
| 100 | Supply and fix of Socket outlet 5 pin 6 Amps flush type.230 volts, complete all as specified and as directed by Engr-in-Charge. |
| 101 | Supply and fix of switch Socket combination out let multi purpose 5 pin 6 Amps flush type.230 volts, complete all as specified and as directed by Engr-in-Charge. |
| 102 | Supply and fix of switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts , complete all as specified and as directed by Engr-in-Charge. |
| 103 | Supply and fix of Ceiling rose, surface Bakelite three terminals, complete all as specified and as directed by Engr-in-Charge. |
| 104 | Supply & Fixing LED lights fitting 1 x 20W, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed by Engr-in-Charge. |
| 105 | Supply & Fixing LED light fitting 1X9 W/ 1X 10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed by Engr-in-Charge. |
| 106 | Supply & fix sheet metal enclosures for DB's Single pole and Neutral 4 way with 200 Amps rated bus bar, complete all as specified and as directed by Engr-in-Charge. |
| 107 | Supply and fixing 240 V 10 KA 'C' Curve SPN 63 Amps complete with connection testing and commissioning, complete all as specified and as directed by Engr-in-Charge. |
| 108 | Supply and fixing 240 V 10 KA 'C' Curve SP 6-32 Amps complete with connection testing and commissioning, complete all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 109 | Supply and fixing 240 V 10 KA 'C' Curve SP 6-32 Amps complete with connection testing and commissioning, complete all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
