|
| 1 | Supply of 10 M High Mast System with its accessor-Iss, Mast shaft slhall be given in two section, Hot-dip galvanized and sultable for wind velocity as per (IS:875 5 part 3. It shall also include accessorles for High Mast Including Head frame, steel wire rope 6 mm dia(7/19 Construction) Double Drum winch Galvanized Lantern Carriage arrangement suitable for 6-12 Luminarie symmetrial & its control gear boxes & lighting final. The Mast shall have and integral power tool system. Luminaries wiring materials not include of t foundation bolts manufac-tured from special steel along with nuts, washers, anchor plates and templates, Delivery Charges (Lifting special type loading and unloading) TOP DIA 150MM BOTTOM DIA 340MM THICK 3MM BASE PLATE PCD 440 CONSISTING OF INTREGAL LOOP BOX WITH 4 POLE CONNECTOR, FOUNDATION BOLTS-6 nos X M 24X 750MM RING RADIAL 1500 MM TOP [MOUNTED ARM SUITABLE FOR 6 NOS LUMINARIES INSTALLATIONS. REINFORCEMENT SHALL BE CONFIRM TO IS1786 LATEST EDITION 1:10 THE FOUNDATION SHALL EXTENT ABOVE SURROUNDING GROUND/DRIVEWAY LEVEL FOR 200 MM AND HAVE SLANT 63 MM DIA. PVC AS PER DRAWING EXCAVATION RCC AND REINFORCEMENT SHALL BE DONE PAID EXTRA ITEMs (MATERIALS FOR POLE SHAFT AS PER BSEN 10025/1S 5986 GRADE OR EQUIVALENT / MATERIAL FOR BASE PLATE - AS PER IS 2062 GRADE FE410/ METAL PROTECTIOM HOT DIP GALVANISATION AS PER IS 4759 OR EQUIVALENT (MAKE UTKARSH/ BANSAL/ SKIPPER/ CROMPTION/ BAJAJ/ BPP) |
| 2 | Construction of suitable shallow foundation as per standrad design As per the manufacturer with 1:11/2:3 Cement concrete M20 grade For the high mast on siding the safe soil bearing capacity at the site as 10t/sq mtr. And about 2mn depth along with suitable dimension that confirms safe bear of high mast with suitable dimension that conforms safe ground incl all material and labour including cost of one set 4no foundation nut bolt of 750 mmn made out of tor steel m24 and installation at site with wiring Complete in all respect Le entire satisfaction of engineer in charge.This civil foundation work incl or erection of 10 mtr high mast tower by earth work in excavation of foundation trench approx zone (1200x1200x1500) Cu.mm including removing soil and necessary trimming the side of trench leveling and dressing complete as per modern engineering practice. |
| 3 | Supplying, fiting and fixing Stainless Steel ralling consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (dhree) nos 19mm dla horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel raling per metre 6.5 Kg (approx) |
| 4 | Supplying fitting & fixing granite tiles10mm to12mm. thick in columns, wall, facia etc, with 15 thick (avg) cement mortar (1:2) Including making suitable arrangements to hold the stones properly by assycopper hooks including pointing in cement nortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone Sl complete as per direction of the Engineer-in-charge Including Of all materials, Jabours. scaffolding, stagíng,Curing and roughening of concrete e surface complete. (Usingcement slurTyat back sideof 4kg/sq.m& white cement slurry for jolnt illlng @1.8 kg/sq.m) |
| 5 | Supplying Fitting Fixing and connection following materials as switch gear list a)FP Terminal 40 amp, b) DP MCB 32 amp etc conncction incl. c) 3 pole Power Contactor (MNX 32) d) Analoge Timer System for energy Saving & Special cut-off system as etc. all complete with neccessary Connection as per modern engineering practiced Incl. locking arrangement in stand mounted Feeder Piller Box Cover by 14 SWG CRCA Sheet having size of (0.75x0.6x0.4) mtr. |
| 6 | AVIATION WARNING LIGHT: SITC INTEGRAL LED AVIATION LIGHT COMPRISING OF ALUMINIUM HOUSING WITH POLYCARBONATE ENCLOSER ON THE TOP OF THE POLE BY SUITABLE MEANS WITH NECY CONNECTION ETC COMPLETE, MAKE-BAIAI MODEL BGAV 302 LED OR SIMILAR EQLV AS PER EIC |
| 7 | Erection of up to 10 mtr Hlgh Mast over the civil foundation bolts with help of Trolley fxed moving Crane (5 Tonne Capacity) and 8 Nos corroding free nuts bolts etc Complete. |
| 8 | Supply of 160 watt, 230V AC, 50hz LED Flood light Luminarles (IP-65 chip per luminaries made by Cree/Nichla/Osram etc. 130lms/w230v power supply, P.F.0.9; more than 50,000 hrs of life span for LED, Color temperature ; cool white > 6500k wlth al dle-cast fixture; lux; 30lm at 20m. Make: Phllps/ Bajal/ Benlo/ Havells/ Crompton |
| 9 | Fixing only Floodlight with sultable the clamps for mounting on Pole mast tower or slmilar structure. |
| 10 | Supply of 3 core 2.5 sqmm unarmoured CU cable trallng cable inside through the pole. (Make-Gloster/Polycab/KEI) |
| 11 | Supplying of 2 core 10sqmm XLPE (Armoured) aluminium cable (Havels/Gloster make) as per IS-7098 part-l for underground trench below 1.00 mtr from GL and mending good damages covering the same by filling with sand at least 0.50 mtr(Make:R.R cable/Gloster) |
| 12 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, wlth brick protection on the top of the cable with 8 (elght) Nos. bricks per metre, including flling the space between the brick & cable and also the trench wlth shifted sol, leveling up and restoring surface duly rammed |
| 13 | Supplying of 25mm heavy gauge Polythene Pipe. |
| 14 | Earthing with 50mm dla Gl pipe 3.64 mm thick x 3.04Mts. Long and 1 x4 SWG GI (Hot Dip) wire (4 Mts. Long), 13mm dia x 80 mm long Gl bolts, ldouble nuts,double washers incl. S & F15 mm dia Gl pipe protection (1 Mts. Long) to be filled with bltumen partly under the ground level and Dardy above ground level delven to be average depth of 3.65 Mts. below the ground level as below (a) by TATA-Medium Gl pipe. |
| 15 | Supply and (ixlng compression type gland, complete with brass glad brass rings & rubber ring for dust & moisture proof entry of XLPE/PVC armored cable as below; For 4 core 16sq.mm |
| 16 | Finishing the end of following XLPE/PVE armored cable by crimping method Including supplyling and fixing solderless socket (dowels make) tapes anticorrosive paste & jolnting materlals; For 4 core 16s0.mm. |
| 17 | WBSEDCL Connection including all charges (ancillary) |
| 18 | Supplying Fitting & Fixing Marble Folok with scheme details mentioned on it. |
| 19 | Sub Total |
| 20 | GST 18% |
| 21 | CESS 1% Please Enable Macros to View BoQ information |
