|
| 1 | Interactive Display 85 inch (Samsung or equivalent) |
| 2 | Android Tizen 65 inch (Samsung or equivalent) |
| 3 | Access Points (TP link or equivalent) |
| 4 | 8 port POE switch with 2 port uplinks (TP link or equivalent) |
| 5 | Keystone cat6 jack with face plate |
| 6 | Cat-6 cables |
| 7 | MCC DSP 200 (People link or equivalent) |
| 8 | Amplifier 200w (People link or equivalent) |
| 9 | Wall mount speaker (People link or equivalent) |
| 10 | 10x optical zoom camera (People link or equivalent) |
| 11 | USB 2.0 active ext. cable 15 mtrs. (People link or equivalent) |
| 12 | Tabletop Gooseneck microphone (People link or equivalent) |
| 13 | Laptop Specs: - i3/13th gen/512GB SSD/8 GB Ram/Windows 11Pro/1year warranty |
| 14 | Cat6 patch cord 10 mtr. |
| 15 | Router (sonic wall l3) for WBSWAN lease or router for normal broadband connection) (SonicWall or equivalent) |
| 16 | PVC Pipe ISI |
| 17 | Back box |
| 18 | Installation, Configuration and integration charge |
| 19 | Stripping off worn out plaster and raking out joints of walls, ceilings etc. up to any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 20 | waterproof coating with PIDIFIN2K or similar chemical for bathrooms, kitchen sinks, balconies, etc. Ideal as a coating for waterproofing of roofs, walls, chhajjas, canopies, etc. waterproof coating on internal sides of domestic water tanks. (LMR) |
| 21 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Gnd floor).15mm thick, with 1:4 cement mortar [Excluding cost of chipping on concrete surface |
| 22 | Cleaning the walls and ceiling by scraping, sand papering and smoothening down the surface including putting. |
| 23 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand. (1.5 mm thick).6th floor |
| 24 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's spec including cleaning & smoothening of surface. 2 Coats |
| 25 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 26 | Painting with best quality Synthetic Enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc on the surface if necessary. On timber or plastered surface with Super Gloss (Hi-gloss), Two coats (with any shade except white). |
| 27 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals). Sal. |
| 28 | Supply solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well-seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, Mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings 35mm thick shutters (single leaf) |
| 29 | Anodized aluminum butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:(v) 125 x 63 x 3.2mm. |
| 30 | Anodized aluminums barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(viii) 225mm long x 12mm dia. bolt. |
| 31 | Supply 'Godrej' mortise lock chromium plated with keys 6 levers including fitting & fixing complete or equivalent |
| 32 | Door stopper. (Brass) |
| 33 | Supply, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of reputed brand complete including all incidental charges. |
| 34 | Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed. Heavy type |
| 35 | Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved pattern and size 595mm X 595mm with NRC value > 0.65 should be placed in the Grid module to form a False Ceiling. In ground floor. Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U- 1520). |
| 36 | Supply, fitting and fixing Rectangular printed pvc carpet on floor with glue. (non schedule item) |
| 37 | Providing and fixing of factory-made uPVC casement window (White Color) (U value=1.9-1.3 W/m 2 K, flame resistant, self-extinguishing, lead free) comprising uPVC multi-chambered frame, Sash, & Mullion with having wall thickness of 2.3 mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm) made from roll forming process of required length. All corners of frame and sash will be fusion welded. mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's, uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless-steel screws etc. shall be provided in all frame, sash & mullion, wherever necessary. Thereafter, 5 mm clear annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., stainless steel (SS 304 grade) friction hinges & zinc alloy (white powder coated) casement handles (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window frame shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per approved drawing & direction of Engineer-In- Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, only manufacturer Warranty is acceptable) Casement Window frame of size 65 x 58 mm & Sash / Mullion of size 65 x 80 mm (Window Height above 1200 mm or Building height above 18 mtr) both having wall thickness of 2.3 ± 0.2 mm. |
| 38 | Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) Sal |
| 39 | Supply, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping]12mm.6th floor |
| 40 | Supply, fitting and fixing high pressure wood laminate sheet fix with fevicol merine & hitex. wooden finish.6th floor (non schedule item) |
| 41 | Supply fire extinguisher mount. (6kg) |
| 42 | Supply LG 1.5TON 5star AI DUAL inverter Spit AC (copper, super convertible 6-in-1 cooling, antivirus protection) or equivalent |
| 43 | Supply WOODEN podium sp- 565 etc. |
| 44 | Supply & fixing window Curtain polyester blackout with curtain rail. Floral, ivory |
| 45 | Supply Table 7.6ft x2.6ft, both side laminated wood table and sunmica on op the top and three keyboard slider(2ft) with each table. |
| 46 | Supply chair-steel body without handle and height 36 width-18inch cushioned with mesh type back rest. |
| 47 | Supply Officer's Table 7.6ft x2.6ft, both side laminated wood table and sunmica on op the top. |
| 48 | Supply Officer's chair-steel body without handle and height 48 width-24inch cushioned with mesh type back rest. |
| 49 | Supply and fixing polythene pipe complete with fittings as necessary. under ceiling/beam, bound with 22 SWG GI binding wire incl. Supply and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm Dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) |
| 50 | 25mm dia main conduit P.P. Circuit |
| 51 | Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. Supply & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. Supply and drawing 18 SWG GI wire as Fish wire & mending good damages to original finish by using own tools & tackles |
| 52 | Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. Supply & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. Supply & drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools & tackles |
| 53 | Supply and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prepaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required (3 x 22/0.3 (1.5 sq mm) |
| 54 | 2x 36/0.3(2.5sqmm) +1x22/03(1.5sqmm) as ECC |
| 55 | 2x 56/0.3(4sqmm) +1x36/03(2.5sqmm) as ECC |
| 56 | Distn. wiring in 22/0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polyethene pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make or equivalent) fixed on sheet metal (16 SWG) switch board with Bakelite/Perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish(2x22/0.3 (Ph. & N) & 1x22/0.3 as ECC (Avg run 10 mtr) |
| 57 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polyethene pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make or equivalent) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with Bakelite/Perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish(i) on board GF=60, & 1ST Floor=60 |
| 58 | Supply & Fixing 240V, 16A, 3pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top 4 module GI modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc G.F= 20 & 1st Floor=15 |
| 59 | Supply and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Havells make or equivalent 4way enclosure with 63 A FP ISOLATOR 1nos /F double door Horizontal TPN MCB distribution board GF=5 and 1st floor=2 |
| 60 | Supply and fixing sheet metal (16SWG) Iron clad busbar chambers on angle iron frame on wall incl earthen attachment and painting as required- (As per Drawing no. 470 of PWD Specification Book) (4Bars 415 V 63A) |
| 61 | Supply and fixing Sheet steel Main Switches on flat iron frame on wall (415V TPN 60/63 A Havells make 5+2 or equivalent |
| 62 | Supply and fixing Sheet steel Main Switches on flat iron frame on wall (240V TPN 30/32 A Havells make 4+5 or equivalent |
| 63 | Supply and fixing changeover switch with Sheet steel enclosure on angle iron frame on wall with nuts bolts etc 415 V FP 63A Havells make or equivalent |
| 64 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: Moorum soil TATA-Medium GI pipe |
| 65 | Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width duly plastered with cement mortar (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. |
| 66 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode |
| 67 | Supply of Aluminium armoured cable of 4 core 16 sqmm 7x 60 mtr (app make) |
| 68 | Laying of cable up to 4 core 16 sqmm AL.Ar. cable incl MS saddle with earthing (7x 58 mtr +2x23= 406mtr |
| 69 | Supply and fixing angular batten holder (Anchor) on 75mm dia PVC round block/round Bakelite on wall/ceiling |
| 70 | Supply and fixing socket type fan regulator (step type) (Brand approved by EIC) on existing sheet metal switch board with Bakelite/Perspex top cover by screw incl. making necy. |
| 71 | Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener |
| 72 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod up to 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. |
| 73 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated |
| 74 | Supply & Fixing GI waterproof type looping cable box size 200x150x100mm deep having 4mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for up to 2 core 16 sqmm PVC/A cable and having lined with rubber gasketed GI top cover with brass machine screws etc. |
| 75 | Supply of 1200mm sweep ceiling fan app. Make such as orient, Usha, Khaitan etc [LMR] |
| 76 | Supply of 4-0\\" long LED batten tube light app. Make such as Crompton, Havells, Mescab etc [LMR] |
| 77 | Making Panel Board with angle iron frame and also connection with the proper cooper/AL wire. [LMR] |
| 78 | Supply & fixing AC STARTER 25A |
| 79 | Supply & fixing Chain light 5m |
| 80 | FLORA 06W Panel Celling Light or equivalent |
| 81 | WIPRO 12W Panel Celling Light or equivalent Please Enable Macros to View BoQ information |