|
| 1 | Providing and laying of RCC Platform to Raised flooring with Cement Concrete 1:2:4 (1 cement : 2 Coarse aggregate : 4 Aggregate ) with specific area as per required and as per direction of site in charge | Providing and laying of RCC Platform to Raised flooring with Cement Concrete 1:2:4 (1 cement : 2 Coarse aggregate : 4 Aggregate ) with specific area as per required and as per direction of site in charge |
| 2 | Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200 mm X 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 850 kg/m3 substrate core over a resin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thick under layer polyurethane foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting ,End edge, T- moulding, Reducer) shall have to be added separately, wherever required as directed by Engineer in Charge in approved shade & colour as per drawing specification ( including all lead and lift )(Basic Rate :-Rs 180/- per sft) | Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200 mm X 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 850 kg/m3 substrate core over a resin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thick under layer polyurethane foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting ,End edge, T- moulding, Reducer) shall have to be added separately, wherever required as directed by Engineer in Charge in approved shade & colour as per drawing specification ( including all lead and lift )(Basic Rate :-Rs 180/- per sft) |
| 3 | Supplying Laminate Floor Accessories (Skirting, End edge, T moulding Reducer ) to 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a High-density fiberboard (HDF) having density > 840 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk under layer polyurethane foam on polythene sheet 250 | Supplying Laminate Floor Accessories (Skirting, End edge, T moulding Reducer ) to 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a High-density fiberboard (HDF) having density > 840 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk under layer polyurethane foam on polythene sheet 250 |
| 4 | Providing and fixing wall panelling with WPC luvar or fluter panel with 12 mm thick , approved colour , pattern , design , shade, fixing with required 12 mm ply for support as per required area and as per direction of site in charge' | Providing and fixing wall panelling with WPC luvar or fluter panel with 12 mm thick , approved colour , pattern , design , shade, fixing with required 12 mm ply for support as per required area and as per direction of site in charge' |
| 5 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross \\"T\\" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross \\"T\\" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. |
| 6 | Providing and fixing Electrical work for conference room including wiring inside room floor and provision for ac and Celling light 600 x 600 roof 36 watt with Switches and socket power , and underground wiring with in room as per required including 2.5 to 6mm copper wire as where required , Modular switches and power socket with 4 nos wall fan , Electrical wiring with room complete as per direction of site in charge | Providing and fixing Electrical work for conference room including wiring inside room floor and provision for ac and Celling light 600 x 600 roof 36 watt with Switches and socket power , and underground wiring with in room as per required including 2.5 to 6mm copper wire as where required , Modular switches and power socket with 4 nos wall fan , Electrical wiring with room complete as per direction of site in charge |
| 7 | Providing and fixing cupboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. (Payment of providing and fixing auto closing hinges shall be paid separately) | Providing and fixing cupboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. (Payment of providing and fixing auto closing hinges shall be paid separately) |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 9 | Providing and fixing 18 mm thick plywood for extended floor area as per required size with proper fixing with nails and fastner on floor or wall as per direction | Providing and fixing 18 mm thick plywood for extended floor area as per required size with proper fixing with nails and fastner on floor or wall as per direction |
| 10 | Providing and fixing Computer table for lab using 19 mm thick HDMR board with 1 mm thick top laminate with required lenth 5X.075X0.9 mtr with partiton every 900 MM both side 1mm laminate , with wooden stand for foot rest, and fixing with fastner, nail , Edge bending 19mm tape matching colour , rawl,plug, stright with proper fixing as per direction of site in charge, | Providing and fixing Computer table for lab using 19 mm thick HDMR board with 1 mm thick top laminate with required lenth 5X.075X0.9 mtr with partiton every 900 MM both side 1mm laminate , with wooden stand for foot rest, and fixing with fastner, nail , Edge bending 19mm tape matching colour , rawl,plug, stright with proper fixing as per direction of site in charge, |
| 11 | Removing and re fixing wooden door as per required size with change of SS hinges fixing 35mm thick screw with fixig margin as per required area as per direction of site in charge | Removing and re fixing wooden door as per required size with change of SS hinges fixing 35mm thick screw with fixig margin as per required area as per direction of site in charge |
| 12 | Any other Work Paid as per Civil 2023 DSR Actual rate .. And as per CPWD rule,Note: The payment of DSR’23 Items (which are inclusive of GST) shall beregulated as below:Rate of DSR’23 Items & 27.0 Additional Miscellaneousitems i/c GST = X | Any other Work Paid as per Civil 2023 DSR Actual rate .. And as per CPWD rule,Note: The payment of DSR’23 Items (which are inclusive of GST) shall beregulated as below:Rate of DSR’23 Items & 27.0 Additional Miscellaneousitems i/c GST = X |
