|
| 1 | Dismantling AC/ CGI/ translucent ( corrugated, semicorrugated,etc), as in roof covering complete. |
| 2 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws as specified. |
| 3 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge,etc with self tapping screws or J hooks as specified. |
| 4 | M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc Fixed with L-type or J-type or cranked hook bolts complete all as specified. |
| 5 | M&L Asbestos cement one piece plain angular ridge 6mm thick Fixed with L-type or J type or cranked hook bolts complete all as specified. |
| 6 | Dismantling timber scantling in fillet,rails,post,rafters,purlin etc under 40 sq cm in section complete |
| 7 | Dismantling of timber scantling 40 Sqcm and over in section in any position complete. |
| 8 | M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc complete all as spd & directed. |
| 9 | Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets. |
| 10 | M&L for providing aluminium snap Grid frame work for false ceiling with of size 605X605 mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm,weighing 0.24 kg/RM and 23.5mmX26.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's complete all as specified. |
| 11 | M&L 4mm thick non asbestos fibre designer cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws. |
| 12 | Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc |
| 13 | M&L rendering 15 mm thick in cement mortar 1:6 on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. Note including scafolding up to G+3 story bldg, etc complete.complete |
| 15 | Materials & labour for prepration of newely plastered surfacea nd finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed. |
| 16 | M&L finishing walls on Newly Plaster surfaces with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.Note including scafolding up to G+3 story bldg, etc complete.complete |
| 17 | M&L finishing walls on Complete removal of old prepared surfaces with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.Note including scafolding up to G+3 story bldg, etc complete.complete |
| 18 | Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore. |
| 19 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 20 | Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore. |
| 21 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 22 | S&F Kitchen cabinate hinge in Concealed (Euro) Hinges Installed inside the cabinet so the hinge is not visible from the outside, supports full overlay, half overlay, or inset doors Adjustable for door alignment Typically supports door thicknesses around 16–40 mm complete all as specified and directed by EIC. |
| 23 | S & F Second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 24 | S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete |
| 25 | S&F Decorative laminate in thickness 0.9mm type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions |
| 26 | S&F block boards 18/19mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one facetype for cupboard shutter, shelf, etc complete |
| 27 | S&F 12mm thick plywood grade Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination both sides, fixed with screws to timber frame workcomplete all as specified. |
| 28 | Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) |
| 29 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) but Exc 1.5 and n. Exc 4 Sqm each |
| 30 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified |
| 31 | S & F powder coated aluminium window and ventilator shutters, side hung type or two or three track type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.if use sliding tack provide all locking arrangement,rubber beading,cleat incl all fitting and fixture complete. |
| 32 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane. |
| 33 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square Exc 0.5 Sqm in each pane. |
| 34 | S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squares n. exc 0.5 Sqm in each pane etc complete all as spd and directed. |
| 35 | S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed. |
| 36 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples in repairs. |
| 37 | M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete. |
| 38 | Supply & fix second class hard wood 35m thick glazed and skeleton factory made shutter for door open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, size members of shutters as specified in SSR Part-I Sec 8, Clause 8.24 (a) complete all as specified and directed . |
| 39 | Supply & fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed. |
| 40 | M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified. |
| 41 | M&L Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified. |
| 42 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long. |
| 43 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long. |
| 44 | S&F Aluminium anodised handles of extruded section and fixed 150 mm long. |
| 45 | S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed. |
| 46 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed. |
| 47 | S & F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm |
| 48 | M&L preparation of new wooden or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying tow coats of synthetic enamel paint over a coat of pink primer |
| 49 | M&L for prepration of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 50 | M&L for preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted complete all as directed. |
| 51 | M&L for preparation of old painted steel surface of any description , over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted all as directed. |
| 52 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed. |
| 53 | Roughing surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc. |
| 54 | M&L for 10 mm thick Light coloured vitrified ceramic tiles of size in floors, 600 x 600 mm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:4 complete all as specified & directed. |
| 55 | Description all as per Ser Item No 54 but as in Skirting with 10mm thick rendering in CM 1:3 |
| 56 | M&L for 450x350x7mm thick glazed ceramic tiles colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4, Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed. |
| 57 | M & L for Machine cut Kota Stone slab flooring 18-20 mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing and nosing complete all as specified and directed. |
| 58 | M & L for Machine cut Kota Stone slab 18-20 mm thick in riser of step,skriting,dado,and pillar and jointed with gray cement slurry mixed with pigment to shade os slab incl rubbing and polishing and rounding to edge of stone slab complete all as specified and directed. |
| 59 | M&L for 20 mm thick granite (of any type), as in cooking plateform etc set in CM 1:4 and grinding and polishing and rounding / moulding the edges complete. |
| 60 | Dismantling water tanks capacity exc 250 ltrs & n exc 500 ltrs and removing from site complete all as specified and directed. |
| 61 | Supply and fixing three layer PVC tank of 500 ltr capacity including Supplied and fixed 20mm dia brass float valve assembly complete all as specified and directed. |
| 62 | S& F in repair Ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs, complete all as specified and directed. |
| 63 | S&F of white/colour PVC Cabinet Mirror of Size 350 mm X450 mm of approved make |
| 64 | S&F PVC waste pipe 32 mm dia and 900 mm long for WHB and Kitchen sink. |
| 65 | S & F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15mm bore connections complete all as specified and directed. |
| 66 | S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass ferrule and fixed |
| 67 | S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete. |
| 68 | Supply and fixing in repair PVC valveless syphonic action low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc. complete all as specified and directed. |
| 69 | S&F in repairs shower rose brass cromium plated with swivel joints of size 75 mm dia cast copper alloy CP, fancy type with CP neck 6\\" long made to shape comptete. |
| 70 | Mild steel Powder coated pipes 32 mm dia with wall thickness 16 gauge, with fixing brackets stops, roller etc. in curtain rods fixed in repairs complete all as specified and directed. |
| 71 | S&F end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia complete |
| 72 | Demolition of cement concrete of any description and in any position and removing the rubbish from the work site. |
| 73 | 75mm thick, PCC 1:3:6, type C-1 using 20 mm graded stone aggregate, as in plinth protection finished even & smooth without using extra cement complete all as specified and directed . |
| 74 | M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete |
| 75 | Description all as per Ser Item No 74 but as in Skirting with 10mm thick rendering in CM 1:3 |
| 76 | Taking out defective submersible pump set installed at 200-600 feet depth including disconnecting electric connections, removing submersible cable, GI column pipe, safety rope, and all accessories using tripod/winch/chain pulley/Hydra arrangement, servicing and repair of submersible pump capacity upto 15 HP including dismantling of pump and motor, cleaning of impellers, shaft alignment, greasing, replacement of gasket set, gland packing, minor hardware, and reassembly and transporting the defective borewell to workshop. after repair lowering and re-installation of repaired submersible pump set back to 200–400 feet depth including lowering of GI pipe column/PVC pipe, submersible cable, clamp arrangement and reconnection of starter suitable for the rating of existing submersible pump, including wiring connections. After installation, the system shall be tested including megger test of cable and motor, running and load current check, leak testing, discharge verification and handing over the system in fully satisfactory operational condition complete as directed by Engineer-in-Charge.Note:(a) Unit rate quoted shall deemed to include only labour for taking up & lowering the submersible pump from bore well along with delivery pipe complete(b) Repairs/rewinding of submersible pump shall be measured & paid for separately under relevant items.(c) Replacement of colummn pipe will be measured and paid for separately as supply only, under relevants items. (d) Expendable stores like cotton waste / cleaning materials, lubricants, gland packing, metal filling, machining and transportation from site to work shop and back are deemed to be included in rate quoted |
| 77 | M&L for rewinding the Submersible pump Motor with PVC insulated, super enamelled copper conductor with ‘F’ class heavy grade insulation weight and turns to achieve its full efficiency including tying the winding and connecting the coils and brining the connections as that of existing one including applying insulating varnish, heating and backing the windings thoroughly including taking down old existing copper winding complete all as specified and directed for Submersible pump motor of following capacity :- |
| 78 | Description all as per Ser Item No 77 but Submersible Motor up to and including 5 HP. |
| 79 | Description all as per Ser Item No 77 but Motor above 5 HP up to 10 HP. |
| 80 | Dismantling and taking out the centrifugal pumping set with motor from the existing foundation for carring necessary repair/ servicing by replacing the unservicable parts including overhauling the pump set, renewal of gasket to pump, suction and delivery lines, gland packing, greasing nuts, bolts and washers, re-connecting up of the electric / water connections, including fixing of new coupling (CI/rubber) as per existing all as required at site of work of capacity upto 40 HP, including re-fixing at same location including aligning and commissioning complete all as specified and directed.Notes:- (i) Expendable stores like cotton waste / cleaning materials, lubricants, gland packing etc., and transportation from site to work shop and back are deemed to be included in unit rate quoted.(ii) Labour element is deemed to be included in unit rate quoted. |
| 81 | M&L Dismantling and strip opening the motor completely including disconnecting the cable connections and coupling of the motor removing the starter and rotor units, bearings complete servicing the motor assembly including cleaning the carbon deposits with carbon tetra chloride, greasing the bearings etc., heat varnishing the motor windings by applying varnish and keeping the windings into the hot air oven till the moisture evaporates complete at authorized workshop including transportation and refit the same after repairs and re-connecting up of the electric connections including testing and commissioning complete all as specified and directed for the following capacities:- |
| 82 | Description all as per Ser Item No 79 but for Induction Motor 40 HP capacity. |
| 83 | M&L cutting and taking out the unserviceable / burnt out copper winding from the electric motor, preparation of the surface and rewinding the same with super enamelled copper conductor with ‘F’ class heavy grade insulation, weight and turns to achieve its full efficiency including tying the winding and connecting the coils and brining the connections as that of existing one including applying insulating varnish, heating and backing the windings thoroughly with necessary insulating materials complete all as specified for the capacities upto 100 HP motor |
| 84 | Supply and fix Ball bearing in replacement for electric motor of capacity 40 HP, 3 Phase as per existing make and model complete all as specified and directed. Make : Hindustan Brown Breware and equivalent |
| 85 | Supply and fix Ball bearing in replacement for electric motor of capacity 7.5 HP, 3 Phase as per existing make and model complete all as specified and directed. Make : Hindustan Brown Breware and equivalent |
| 86 | Supply and fixing in replacement of power contactor type ML-1 complete all as specified and directed. |
| 87 | Supply and Fix Copper lugs of different capacity and size as directed and specified by engr-in- charge. |
| 88 | M&L Stainless steel nut, bolts and washers of different sizes as directed and specified by engr-in- charge. |
| 89 | Supply only LT tape fire resistant type complying IS 7809, 1.8 cm width & 25 mtr length all as directed and specified by engr-in- charge. |
| 90 | S&F in replacement 3 phase 415 Volts, submersible pump controller MU-G6 (5 HP - 7.5 HP DOL) or 3 seat enclosure with over load, short circuit, under current, unbalance, phase reversal, phase loss,locked rotar, eath fault, stall ,CB failure with fault record with date and time, having feature of fail safe operation, and over load characterstic rating 14 Amps, relay range 9 to 14 Amps, including connecting up of incoming and outgoing connections and testing commissioning, including removing the existing unserviceable one complete all as specified and directed. Please Enable Macros to View BoQ information |
| 91 | S&F in replacement 3 phase 415 Volts, submersible pump controller MU-G6 (5 HP - 7.5 HP DOL) or 3 seat enclosure with over load, short circuit, under current, unbalance, phase reversal, phase loss,locked rotar, eath fault, stall ,CB failure with fault record with date and time, having feature of fail safe operation, and over load characterstic rating 14 Amps, relay range 9 to 14 Amps, including connecting up of incoming and outgoing connections and testing commissioning, including removing the existing unserviceable one complete all as specified and directed. Please Enable Macros to View BoQ information |
