|
| 1 | Safe loading Carriage including unloading and proper stacking of following materials from central store Barabanki to site of work. |
| 2 | Earthing Rod |
| 3 | PCC Pole 8.5 mtr Long |
| 4 | Top Channel |
| 5 | T-off Channel |
| 6 | ACSR Weasel Conductor |
| 7 | 250 KVA TF |
| 8 | 100 KVA TF |
| 9 | 11 kv Polymer Pin Insulator |
| 10 | 11 kv Pin with Nut |
| 11 | 11 kv Polymer Disc Insulator |
| 12 | 11 kv Disc Fitting |
| 13 | Three Phase Distribution Box |
| 14 | Dropper Channel |
| 15 | GI Wire 8 SWG |
| 16 | X-arm M.S Angle 65x65x6 mm V Type |
| 17 | 11 KV VCB for O/G CTR 200-100/5A, 350 MVA, (1250 Amp.) |
| 18 | 11 KV VCB for I/G CTR 600-300/5A, 350 MVA, (1250 Amp.) |
| 19 | Cross Arms Holding Clamp |
| 20 | LT AB Cable (3x95+1x70+1x16) sqmm |
| 21 | LT AB Cable (3x120+1x95+1x16) sqmm |
| 22 | Single Core LT Cable 1x120 sqmm |
| 23 | Single Core LT Cable 1x240 sqmm |
| 24 | Single Core LT Cable 1x400 sqmm |
| 25 | Dragging of pole from Store to site |
| 26 | Grouting of Pole in depth of 1/6th the length of pole in ratio 1:4:8 in cement sand and brick ballast and construction of pole plinth 300mmx45mm above ground level in 1:2:4 in cement, coarse sand and stone grit as per respo norms. |
| 27 | Stringing and sagging of 11 KV line with ACSR Weasel Conductor including nuzzling binding and jumpering (Rabbit conductor will be provided by the department) |
| 28 | Installation of Mounting of Following capacity of Transformer including its connection between 11 KV and LT Line mounting provinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor) |
| 29 | Mounting of 100 KVA Tranformer |
| 30 | Mounting of 250 KVA Tranformer |
| 31 | Errection of Substation type double pole with PCC including mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt 33/11 KV line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 KV pin & Pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of Size 300x300x75 MM. |
| 32 | Earthing by MS Earthing Rod |
| 33 | Erection of single PCC Pole for Stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. |
| 34 | Stringing and Sagging of LT PVC Cable (1x120+1x240+1x400) SQMM (Cable will be provided by the department) |
| 35 | Stringing and Sagging of LT ABC Cable (3x120+1x95+1x16) (3*95+1*70+1*16) (Cable will be provided by the department) |
| 36 | Fixing of 11 KV VCB for O/G CTR 200-100/5A, 350 MVA, (1250 Amp.) |
| 37 | Fixing of 11 KV VCB for I/G CTR 600-300/5A, 350 MVA, (1250 Amp.) |
| 38 | Providing & Fixing of various type materials. All materials shall be supplied by the contractor. |
| 39 | PG Clamp for ACSR Weasel Conductor |
| 40 | Nut & Bolt |
| 41 | 11 KV Fuse Set |
| 42 | Alum. Lug 95 sqmm |
| 43 | Alum. Lug 120 sqmm |
| 44 | Alum. Lug 240 sqmm |
| 45 | Alum. Lug 400 sqmm |
| 46 | Copper L-piece 50x225x10mm (LS) |
| 47 | Clamp for Top/Dropper/T-off/ etc. |
| 48 | J Hook |
| 49 | Eye Hook Clamp |
| 50 | Dead End Clamp |
| 51 | Suspension Clamp |
| 52 | Piercing Connector for AB Cable |
| 53 | Clamp for DB Box |
| 54 | Erection of pipe type earthng for DT with the help of B-Class G.I pipe of size 1.5 inch dia, 60 feet deep boring by providing G.I strip 50x6 MM, 6 meter long attached with clamp L-piece nut & bolt & G.I cap |
| 55 | T/F FENCING 250 KVA wir emess fencing of 11/0.4 KV substation shall be made rectangular off size as nper site requirement not exeeding 3 meter fabrication 45x45x5 mm angle material shall be supply by contracter |
| 56 | T/F PLINTH 250 KVA plinth construction 2x2x1.5 meter with brick cement etc filling wth the sand in the hollow space plastring , 2 No MS channel on the top of plinth for placement of tranceformer , |
| 57 | Construction of LT DistriBution Cum LT Protection Piller Box MS Angle in Rectangle Size 50x50x6 MM 7.5 Meter long For installation Of Henley Type Tailleness Fuse Unit 300 AMP 650 Volt For 3 nos Outgoing Circuits With 4 Nos. Copper Bus bar OF size 1000x50x6 mm Including Proper Grouting of Structure By Digging of pits Off Size 300x300x600 mm With the Help Of Cement, Coresand And Aggregate in the ratio 1:3:6 And Fabrication of structure Complete.All Material Required Will be Supplied & Fixing by the Contractor. |
| 58 | Dismentalling of Old VCB Scrap material from Site to Store |
| 59 | Other line work Please Enable Macros to View BoQ information |
